| Citation: | LIU Shu-gui, MAO Chen-li, ZHANG Hai-tao. Cross-sectional feature parameters extraction of blade based onunorganized point cloud[J]. Journal of Aerospace Power, 2016, 31(9): 2226-2232. doi: 10.13224/j.cnki.jasp.2016.09.023
|
| [1] |
郭真望,张力宁.一种复杂截面线数据的排序与轮廓分离方法[J].今日科苑,2007(8):94. GUO Zhenwang,ZHANG Lining.A kind of complex cross section line data sorting and contour separation method[J].Modern Science,2007(8):94.(in Chinese)
|
| [2] |
谭晓丹.整体叶盘测量特征点提取与数据处理研[D].长春:吉林大学,2014. TAN Xiaodan.Research on sampling distribution and data processing for blisk measurement[D].Changchun:Jilin University,2014.(in Chinese)
|
| [3] |
彭志光,李文龙.基于改进凸包算法的叶片型面特征参数提取[J]. 装备制造技术,2012(1):37-43,46. PENG Zhiguang,LI Wenlong.The blade surface feature parameter extraction based on the improved convex hull algorithm[J].Equipment Manufactring Technology,2012(1):37-43,46.(in Chinese)
|
| [4] |
张新宝,张坤.平面内直线度误差最小区域法的完备性研究[J]. 机械工程学报,2012,48(24):14-18. ZHANG Xinbao,ZHANG Kun.Research on the completeness of minimum zone method of straightness error in plane[J].Journal of Mechanical Engineering,2012,48(24):14-18.(in Chinese)
|
| [5] |
ZHU Lingjian,LI Lin,LIU Junhua.A method for measuring the guideway straightness error based on polarized interference principle[J].International Journal of Machine Tools and Manufacture,2009,49(3/4):285-290.
|
| [6] |
YI Ziqiang,LI Shengyi.High accuracy error separation technique for on-machine measuring straightness[J].Precision Engineering,2006,30(2):192-200.
|
| [7] |
彭志光.基于改进凸包算法的叶片型面检测[D].武汉:华中科技大学,2012. PENG Zhiguang.The blade surface inspection based on the improved convex hull algorithm[D].Wuhan:Huazhong University of Science and Technology,2012.(in Chinese)
|
| [8] |
陈志强.基于测量数据的叶片截面特征参数提取技术研究[D].西安:西北工业大学,2007. CHEN Zhiqiang.Research of cross-sectional feature parameter extraction of blade based on measurement data[D].Xi'an:Northwestern Polytechnieal University,2007.(in Chinese)
|
| [9] |
陈志强,张定华,金炎芳,等.基于测量数据的叶片截面特征参数提取[J]. 科学技术与工程,2007,7(9):1972-1975. CHEN Zhiqiang,ZHANG Dinghua,JIN Yanfang,et al.Cross-sectional feature parameter extraction of blade based on measurement data[J].Science Technology and Engineering,2007,7(9):1972-1975.(in Chinese)
|
| [10] |
Gander W, Golub G H,Strebel R.Least-squares fitting of circles and ellipses[J].BIT Numerical Mathematics,1994,34(4):558-578.
|
| [11] |
Fitzgibbon A,Pilu M,Fisher R B.Direct least square fitting of ellipses[J].Pattern Analysis and Machine Intelligence,1999,21(5):476-480.
|
| [12] |
Tiller P A.The NURBS book[M].2nd ed.New York:Springer Verlag,1997.
|
| [13] |
JIANG Dan,WANG Lancheng. An algorithm of NURBS surface fitting for reverse engineering[J].The International Journal of Advanced Manufacturing Technology,2006,31(1):92-97.
|
| [14] |
贾春阳,杨岳,陈峰. 等弧长原则的NURBS曲线离散算法[J]. 计算机工程与应用,2014,50(3):165-167,189. JIA Chunyang,YANG Yue,CHEN Feng.NURBS curve discrete algorithm based on equal arc-length principle[J]. Computer Engineering and Applications,2014,50(3):165-167,189.(in Chinese)
|
| [15] |
Tiller P.Biarc approximation of NURBS curves[J].Computer Aided Design,2002,34(11):807-814.
|
| [16] |
邓达.曲线的(广义)圆弧样条逼近[D].长沙:中南大学,2007. DENG Da.The approximation of curves by generalized arc spline[D].Changsha:Central South University,2007.(in Chinese)
|
| [17] |
何援军.计算机图形学[M].北京:机械工业出版2006.
|
| [18] |
孙钢峰.叶片中弧线和最大叶型厚度的计算[J].汽轮机技术,1988(2):36-47,14. SUN Gangfeng.The calculation of mean camber line and maxthickness of blade[J].Turbine Technology,1988(2):36-47,14.(in Chinese)
|
DownLoad: