Volume 31 Issue 10
Oct.  2016
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2016  >  31(10): 2318-2324
ZOU Guang-ping, LIU Ze, CHANG Zhong-liang, LI Yu-lei. Constitutive relation of metal-net rubber[J]. Journal of Aerospace Power, 2016, 31(10): 2318-2324. doi: 10.13224/j.cnki.jasp.2016.10.002
Citation: ZOU Guang-ping, LIU Ze, CHANG Zhong-liang, LI Yu-lei. Constitutive relation of metal-net rubber[J]. Journal of Aerospace Power, 2016, 31(10): 2318-2324. doi: 10.13224/j.cnki.jasp.2016.10.002
shu

Constitutive relation of metal-net rubber

doi: 10.13224/j.cnki.jasp.2016.10.002

  • 1. College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin 150001, China;

  • 2. Ningbo Branch of Ordnance Science and Research Academy of China, China North Industries Group Corporation, Ningbo Zhejiang 315103, China

  • Received Date: 2014-10-30
  • Publish Date: 2016-10-28
    Abstract
  • Through analysis of the manufacturing process of the ring metal-net rubber and on the basis of the ring nesting model, in combination with nonlinear theory of dry friction and small curving beam model, the nonlinear constitutive relation of metal-net rubber was constructed, several metal-net rubber components of different relative density were taken on the compression experiment, and the experimental data were used to determine the coefficients on constitutive relation equation and compared with the experimental results. The results show that the model of the stiffness from nonlinear constitutive relation can correctly describe the nonlinear mechanical properties of metal-net rubber, and the theoretic calculations are consistent with the experimental data. The model can reflect the influences of the relative density, mesh size, mesh width and other such parameters, providing a theoretical basis for better design and application of metal-net rubber.

     

    • FullText(HTML)
  • loading
    • References(17)
  • [1]
    李玉龙,何忠波,白鸿柏,等.金属橡胶的研究及应用进展[J].兵器材料科学与工程,2011,34(1):103-108. LI Yulong,HE Zhongbo,BAI Hongbai,et al.Advances in research and application of metal rubber[J].Ordnance Material Science and Engineering,2011,34(1):103-108.(in Chinese)
    [2]
    MA Yanhong,LIANG Zhichao,WANG Hong,et al.Theoretical and experimental steady-state rotordynamics of an adaptive air film damper with metal rubber[J].Journal of Sound and Vibration,2013,332(22):5710-5726.
    [3]
    董秀萍,张力.新型材料金属橡胶建模及应用[M].北京:化学工业出版社,2010.
    [4]
    XIA Hongyu,JIANG Hongyuan,WU Guoqi,et al.Research on the sound absorption performance of metal rubber material[J].Chinese Journal of Acoustics,2009,28(2):154-162.
    [5]
    YAN Hui,ZHANG Wenjing,JIANG Hongyuan,et al.Energy dissipation of a ring-like metal rubber isolator[J].Chinese Physics B,2014,23(4):202-205.
    [6]
    马艳红,郭宝亭,朱梓根.金属橡胶材料静态特性的研究[J].航空动力学报,2004,19(3):326-331. MA Yanhong,GUO Baoting,ZHU Zigen.Static characteristics of metal-rubber[J].Journal of Aerospace Power,2004,19(3):326-331.(in Chinese)
    [7]
    Zhang B,Lang Z Q,Billings S A,et al.System identification methods for metal rubber devices[J].Mechanical Systems and Signal Processing,2013,39(1/2):207-226.
    [8]
    ZHANG Dayi,MA Yanhong,HONG Jie,et al.Dynamic mechanical behavior of nickel-based superalloy metal rubber[J].Materials and Design,2014,56(4):69-77.
    [9]
    李雨蕾.金属橡胶减振及密封构件的设计与应用[D].哈尔滨:哈尔滨工程大学,2013. LI Yulei.Design and application on damping and seal member of metal rubber[D].Harbin:Harbin Engineering University,2013.(in Chinese)
    [10]
    李韶华,杨绍普.滞后非线性模型的研究进展[J].动力学与控制学报,2006,4(1):8-15. LI Shaohua,YANG Shaopu.Research status of hysteretic nonlinear modles[J].Journal of Dynamics and Control,2006,4(1):8-15.(in Chinese)
    [11]
    梅小龙,赵俊生,张保成,等.压缩长度对金属橡胶减振器刚度的影响[J].噪声与振动控制,2013(1):204-207. MEI Xiaolong,ZHAO Junsheng,ZHANG Baocheng,et al.Effect of compressed length on the stiffness of metal rubber vibration absorber[J].Noise and Vibration Control,2013(1):204-207.(in Chinese)
    [12]
    郭宝亭,朱梓根,崔荣繁,等.金属橡胶材料的理论模型研究[J].航空动力学报,2004,19(3):314-319. GOU Baoting,ZHU Zigen,CUI Rongfan,et al.Theoretical model of metal-rubber[J].Journal of Aerospace Power,2004,19(3):314-319.(in Chinese)
    [13]
    马艳红,仝小龙,朱彬,等.金属橡胶热物理性能理论与试验研究[J].物理学报,2013,62(4):048101.1-048101.10. MA Yanhong,TONG Xiaolong,ZHU Bin,et al.Theoretical and experimental investigation on thermophysical properties of metal rubber[J].Acta Physica Sinica,2013,62(4):048101.1-048101.10.(in Chinese)
    [14]
    切戈达耶夫.金属橡胶构件的设计[M].李中郢,译.北京:国防工业出版社,2000.
    [15]
    陈艳秋,郭宝亭,朱梓根.金属橡胶减震垫刚度特性及本构关系研究[J].航空动力学报,2002,17(4):416-420. CHEN Yanqiu,GUO Baoting,ZHU Zigen.The investigation of the stiffness characteristics and the stress-strain relation of metal rubber[J].Journal of Aerospace Power,2002,17(4):416-420.(in Chinese)
    [16]
    彭威,白鸿柏,郑坚,等.金属橡胶材料基于微弹簧组合变形的细观本构模型[J].实验力学,2005,20(3):455-462. PENG Wei,BAI Hongbai,ZHENG Jian,et al.A micromechanics constitutive model of the metal rubber materials based on the radial and axial combined deformation of the microsprings[J].Journal of Expermental Mechanics,2005,20(3):455-462.(in Chinese)
    [17]
    曹凤利,白鸿柏,任国全,等.金属橡胶恢复力的迟滞模型研究[J].中国机械工程,2014,25(3):311-314. CAO Fengli,BAI Hongbai,REN Guoquan,et al.Research on hysteresis model of restoring force of metal rubber[J].China Mechanical Engineering,2014,25(3):311-314.(in Chinese)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(966.0KB)
    XML

    Article Metrics

    Article views (1156) PDF downloads(641) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return