Volume 31 Issue 11
Nov.  2016
Turn off MathJax
Article Contents
GUO Tao, LIN Li, ZHU Cheng-xiang. Simulation calculation of hot air anti-icing system based on internal-external comjugate heat transfer[J]. Journal of Aerospace Power, 2016, 31(11): 2621-2627. doi: 10.13224/j.cnki.jasp.2016.11.008
Citation: GUO Tao, LIN Li, ZHU Cheng-xiang. Simulation calculation of hot air anti-icing system based on internal-external comjugate heat transfer[J]. Journal of Aerospace Power, 2016, 31(11): 2621-2627. doi: 10.13224/j.cnki.jasp.2016.11.008

Simulation calculation of hot air anti-icing system based on internal-external comjugate heat transfer

doi: 10.13224/j.cnki.jasp.2016.11.008
  • Received Date: 2015-02-13
  • Publish Date: 2016-11-28
  • Based on the principle of conjugate heat transfer between the external and internal chamber, AMESim simulation model was established for the hot air anti-icing system. The change rules of the flux, pressure and skin temperature in different bleeding conditions were researched. The internal flow characteristics and the conjugate heat transfer characteristics of the aircraft wing anti-icing system were calculated using this model. The predictions of the flux, temperature and pressure were verified against those in the flow distribution experimental data of the wing anti-icing system, showing a satisfactory agreement. The maximum error was less than 9%. Its accuracy and validity were validated with the comparison of results. On the basis of modeling, a nacelle hot air anti-icing system was simulated. The transient characteristics of key parameters under a certain flight envelop, such as the heat flux, temperature and heating efficiency, were analyzed. The results can be provided as a reference for design, analysis and optimization of hot air anti-icing system.

     

  • loading
  • [1]
    裘燮纲,韩凤华.飞机防冰系统[M].北京:航空专业教材编审组,1985.
    [2]
    周莉,徐浩军,龚胜科,等.飞机结冰特性及防除冰技术研究[J].中国安全科学学报,2010,20(6):105-110. ZHOU Li,XU Haojun,GONG Shengke,et al.Research of aircraft icingcharacteristics and anti-icing and de-icing technology[J].China Safety Science Journal,2010,20(6):105-110.(in Chinese)
    [3]
    杨倩,常士楠,袁修干.水滴撞击特性的数值计算方法研究[J].航空学报,2002,23(2):173-176. YANG Qian,CHANG Shinan,YUAN Xiugan.Study on numerical method for determining the droplet trajectories[J].Acta Aeronautica et Astronautica Sinica,2002,23(2):173-176.(in Chinese)
    [4]
    卜雪琴,林贵平.基于CFD方法的水收集系数及防冰表面温度预测[J].北京航空航天大学学报,2007,33(10):635-641. BU Xueqin,LIN Guiping.Predictions of collection efficiency and anti-icing surface temperature[J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(10):635-641.(in Chinese)
    [5]
    杨胜华,林贵平,申晓斌.三维复杂表面水滴撞击特性计算[J].航空动力学报,2010,25(2):284-290 YANG Shenghua,LIN Guiping,SHEN Xiaobin.Water droplet impingement prediction for three-dimensional complex surfaces[J].Journal of Aerospace Power,2010,25(2):284-290.(in Chinese)
    [6]
    卜雪琴,林贵平,彭又新,等.防冰热载荷计算的一种新方法[J].航空学报,2006,27(2):208-212. BU Xueqin,LIN Guiping,PENG Youxin,et al.New method for calculation of anti-icing heat loads[J].Acta Aeronautica et Astronautica Sinica,2006,27(2):208-212.(in Chinese)
    [7]
    卜雪琴,林贵平,郁嘉.三维内外热耦合计算热气防冰表面温度[J].航空动力学报,2009,24(11):2495-2500. BU Xueqin,LIN Guiping,YU Jia.Three-dimensional conjugate heat transfer simulation for the surface temperature of wing hot-air anti-icing system[J].Journal of Aerospace Power,2009,24(11):2495-2500.(in Chinese)
    [8]
    周玉洁.热气腔结构的优化与数值模拟[D].南京:南京航空航天大学,2010. ZHOU Yujie.Optimal design and numerical simulation of the hot air cavity structure[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010.(in Chinese)
    [9]
    卜雪琴,郁嘉,林贵平,等.机翼热气防冰系统设计[J].北京航空航天大学学报,2010,36(8):927-930. BU Xueqin,YU Jia,LIN Guiping,et al.Investigation of the design of wing hot-air anti-icing system[J].Journal of Beijing University of Aeronautics and Astronautics,2010,36(8):927-930.(in Chinese)
    [10]
    Croce G,Beaugendre H,Habashi W G.CHT3D:FENSAP-ICE conjugate heat transfer computations with droplet impingement and runback effects[R].AIAA-2002-0386,2002.
    [11]
    Pellissier M,Habashi W G,Pueyo A.Design optimization of hot-air anti-icing systems by FENSAP-ICE[R].AIAA-2010-1238,2010.
    [12]
    李庆.飞机开发技术的全新突破—基于模型的系统工程[J].航空制造技术,2011(12):48-53. LI Qing.Model-based system engineering for aircraft development[J].Digital Design and Manufacturing Technology for Large Aircraft,2011(12):48-53.(in Chinese)
    [13]
    McCloy D,Martin H.Control of fluid power:analysis and design[M].2nd ed.Chichester:Ellis Horwood Limited,1980.
    [14]
    Babak K,Alireza S,Mahmood M.Thermodynamic investigation and hydrate inhibition of real gas flow through orifice during depressurization[J].Process Safety and Environmental Protection,2014,92(3):224-230.
    [15]
    Incropera F,Dewitt D.Fundamentals of heat and mass transfer[M].5th ed.New York:Jhon Wiley & Sons Incorporation,2002.
    [16]
    杨世铭,陶文铨.传热学[M].北京:高等教育出版社,1998.
    [17]
    朱永峰,方玉峰,封文春.某型飞机发动机短舱防冰系统设计计算[J].航空动力学报,2012,27(6):1326-1331. ZHU Yongfeng,FANG Yufeng,FENG Wenchun.Design and calculation of aircraft nacelle anti-icing system[J].Journal of Aerospace Power,2012,27(6):1326-1331.(in Chinese)
    [18]
    Papadakis M,Wong S H,Yeong H W,et al.Icing tunnel experiments with a hot air anti-icing system[R].AIAA-2008-444,2008.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1264) PDF downloads(588) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return