| Citation: | LI Jia, LI Hua-cong, WANG Shu-hong, XU Xuan. Outlet clearance optimization on axial-force of inducer and impeller combination aero fuel centrifugal pump[J]. Journal of Aerospace Power, 2016, 31(11): 2765-2772. doi: 10.13224/j.cnki.jasp.2016.11.027
|
| [1] |
刘尚勤.离心泵用作航空发动机主燃油泵研究[J].航空发动机,2006,32(2):43-45. LIU Shangqin.Investigation of centrifugal pump used as a eroengine main fuel pump[J].Aeroengine,2006,32(2):43-45.(in Chinese)
|
| [2] |
樊思齐.航空发动机控制[M].西安:西北工业大学出版社,2008.
|
| [3] |
刘尚勤,王磊.航空发动机的一种新型主燃油泵设计[J].航空发动机,2003,29(2):5-7. LIU Shangqin,WANG Lei.Design of a new main fuel pump for aeroengine[J].Aeroengine,2003,29(2):5-7.(in Chinese)
|
| [4] |
牟介刚.离心泵现代设计方法研究和工程实现[D].杭州:浙江大学,2005. MU Jiegang.Research on the modern design method of centrifugal pump project realization[D].Hangzhou:Zhejiang University,2005.(in Chinese)
|
| [5] |
TAN Minggao,YUAN Shouqi,LIU Houlin,et al.Numerical research on performance prediction for centrifugal pump[J].Chinese Journal of Mechanical Engineering,2010,23(1):21-26.
|
| [6] |
Jan G M,Dusan F,Brance S.Hydraulic axial thrust in multistage pumps origins and solutions[J].Journal of Fluids Engineering,2002,124(2):336-341.
|
| [7] |
Kalinichenko P M,Shepil O N,Velikodnyj E I.Effective ways of axial relief of a stage of the centrifugal pump and the compressor[J].Compressor and Power Engineering Industry,2007,16(4):79-81.
|
| [8] |
李仁年,权辉,韩伟,等.变螺距叶片对螺旋离心泵轴向力的影响[J].机械工程学报,2011,47(14):158-163. LI Rennian,QUAN Hui,HAN Wei,et al.Influences of variable-pitch blade on the screw centrifugal pump axial force[J].Jounal of Mechanical Engineering,2011:47(14):158-163.(in Chinese)
|
| [9] |
朱祖超.高速离心泵轴向力平衡方法研究[J].工程热物理学报,2000,21(6):713-715. ZHU Zuchao.A study on axial-force balanced method of high-speed centrifugal pumps[J].Journal of Engineering Thermophysics,2000,21(6):713-715.(in Chinese)
|
| [10] |
牟介刚,赵锦靖,郑水华,等.离心泵平衡孔位置对轴向力及外特性的影响[J].机械设计与制造,2012,6(6):173-175. MOU Jiegang,ZHAO Jinjing,ZHENG Shuihua,et al.The influence of balance hole position of centrifugal pump on axial force and external characteristics[J].Machinery Design and Manufacture,2012,6(6):173-175.(in Chinese)
|
| [11] |
关醒凡.现代泵技术手册[M].北京:宇航出版社,1995.
|
| [12] |
蒲志理.航空油泵设计[M].北京:国防工业出版社,1983.
|
| [13] |
任璇,姜华川,王飞,等.基于Pumplinx的离心泵优化设计研究[R].贵阳:第15届中国科协年会航空发动机设计、制造与应用技术研讨会,2013.
|
| [14] |
Huang D G,Zhuang Y Q,Cai R Z.A computational method for caviational flows based on energy conservation[J].Journal of Mechanical Engineer in Science,2007,221(11):1333-1338.
|
| [15] |
Singhal A K,Athaval M M,Li H.Mathematical basis and validation of the full caviation model[J].Journal of Fluids Engineering,2002,124(3):617-624.
|
| [16] |
Cheah K W,Lee T S,Winoto S H.Numerical flow simulation in a centrifugal pump at design and off-design conditions[J].International Journal of Rotating Machinery,2007,115(10):342-350.
|
DownLoad: