| Citation: | FENG Kai, ZHANG Jun, WANG Fa-yi. Influence of radial clearance and processing technology on structural properties of gas foil bearing[J]. Journal of Aerospace Power, 2016, 31(11): 2773-2780. doi: 10.13224/j.cnki.jasp.2016.11.028
|
| [1] |
Dellacorte C,Valco M J.Load capacity estimation of foil air journal bearings for oil-free turbomachinery applications[J].Tribology Transactions,2000,43(4):795-801.
|
| [2] |
刘占生,许怀锦.波箔型动压气体径向轴承的应用与研究进展[J].轴承,2008(1):39-43. LIU Zhansheng,XU Huaijin.Application and researchprogress of bump-type foil aerodynamic journalbearings[J].Bearing,2008(1):39-43.(inChinese)
|
| [3] |
Feng K,Kaneko S.Analytical model of bump-type foil bearings using a link-spring structure and a finite-element shell model[J].Journal of Tribology,2010,132(2):217-228.
|
| [4] |
Feng K,Kaneko S.Prediction of dynamic coefficients of bump-type foil bearings with bumps considered as link-spring structures[J].Tribology Online,2011,6(1):10-18.
|
| [5] |
Feng K,Kaneko S.Calculation of dynamic coefficients for multiwound foil bearings[J].Journal of System Design and Dynamics,2009,3(5):841-852.
|
| [6] |
San Andrés L,Kim T H.Forced nonlinear response of gas foil bearing supported rotors[J].Tribology International,2008,41(8):704-715.
|
| [7] |
Rubio D,San Andrés L.Bump-type foil bearing structural stiffness:experiments and predictions[J].Journal of Engineering for Gas Turbines and Power,2006,128(3):653-660.
|
| [8] |
Ku C P R,Heshmat H.Compliant foil bearing structural stiffness analysis:Part I theoretical model including strip and variable bump foil geometry[J].Journal of Tribology,1992,114(2):394-400.
|
| [9] |
Ku C P R,Heshmat H.Compliant foil bearing structural stiffness analysis:Part II experimental investigation[J].Journal of Tribology,1993,115(3):364-369.
|
| [10] |
San Andrés L,Ryu K,Kim T H.Identification of structural stiffness and energy dissipation parameters in a second generation foil bearing:effect of shaft temperature[J].Journal of Engineering for Gas Turbines and Power,2011,133(3):850-857.
|
| [11] |
Rubio D,San Andrés L.Structural stiffness,dry friction coefficient,and equivalent viscous damping in a bump-type foil gas bearing[J].Journal of Engineering for Gas Turbines and Power,2007,129(2):494-502.
|
| [12] |
Radil K,Howard S,Dykas B.The role of radial clearance on the performance of foil air bearings[J].Tribology Transactions,2002,45(4):485-490.
|
| [13] |
Kim T H.Analysis of side end pressurized bump type gas foil bearings:a model anchored to test data[D].College Station:Texas A&M University,2007.
|
| [14] |
Baumeister H.Nominal clearance of the foil bearing[J].Journal of Research and Development,1963,7(2):153-154.
|
| [15] |
Sim K,Kim D.Design of flexure pivot tilting pads gas bearings for high-speed oil-free microturbomachinery[J].Journal of Tribology,2007,129(1):112-119.
|
| [16] |
Dykas B,Bruckner R,Dellacorte C,et al.Design,fabrication,and performance of foil gas thrust bearings for microturbomachinery applications[J].Journal of Engineering for Gas Turbines and Power,2009,131(1):230-241.
|
| [17] |
Dellacorte C,Radil K C,Bruckner R J,et al.Design,fabrication,and performance of open source generation:I/II compliant hydrodynamic gas foil bearings[J].Tribology Transactions,2008,51(3):254-264.
|
DownLoad: