Volume 31 Issue 12
Dec.  2016
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2016  >  31(12): 2851-2858
LIU Shuai, WANG Zhan-xue, ZHOU Li, LIU Zeng-wen. Calculation and dynamic characteristics analysis for the driving moment of three bearing swivel nozzle[J]. Journal of Aerospace Power, 2016, 31(12): 2851-2858. doi: 10.13224/j.cnki.jasp.2016.12.005
Citation: LIU Shuai, WANG Zhan-xue, ZHOU Li, LIU Zeng-wen. Calculation and dynamic characteristics analysis for the driving moment of three bearing swivel nozzle[J]. Journal of Aerospace Power, 2016, 31(12): 2851-2858. doi: 10.13224/j.cnki.jasp.2016.12.005
shu

Calculation and dynamic characteristics analysis for the driving moment of three bearing swivel nozzle

doi: 10.13224/j.cnki.jasp.2016.12.005

  • School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, China

  • Received Date: 2015-04-14
  • Publish Date: 2016-12-28
    Abstract
  • The dirving moment calculation model of each nozzle segment of the three bearing swivel nozzle(3BSN) was built based on the deflection law model and the given deflection law of the 3BSN. The changing law of the moment produced by each nozzle segment's gravity and gas aerodynamic force to the instantaneous rotation axis with the varying nozzle deflection angle was obtained by respective force analysis for each nozzle segment. The effect of the nozzle geometrical parameters on the moment to the nozzle instantaneous rotation axis was obtained by changing the realizable maximum nozzle deflection angle and the length of the second and third nozzle segments. The maximum moment of the second and third nozzle segments' aerodynamic force to the instantaneous rotation axis increased with the realizable maximum deflection angle of the nozzle and occurred at the location in approximately 70% of the maximum deflection angle. The moment of the second and third nozzle segments' aerodynamic force to the instantaneous rotation axis increaseed with the nozzle segment's length increases.

     

    • FullText(HTML)
  • loading
    • References(18)
  • [1]
    Palcza J L,Lander J A.Exhaust nozzle deflector systems for V/STOL fighter aircraft[R].AIAA 74-1169,1974.
    [2]
    Kentfield J A C.Nozzles for jet-lift V/STOL aircraft[J].Journal of Aircraft,1967,4(4):283-291.
    [3]
    Lu F K,Terrier D A.Performance analysis of STOVL aircraft nozzle in hover[R].AIAA-2013-184,2013.
    [4]
    Kurti A,Batt R W.Planetary gear system drive mechanism:US,3485450[P].1967-12-19.
    [5]
    Roberts M C L.Apparatus for moving rotatable components:Europe,EP1775485A2[P].2007-04-18.
    [6]
    Nash D O.Swivelable jet nozzle:US,3687374[P].1972-08-29.
    [7]
    Wildner W.Exhaust gas deflecting pipe:US,3441220[P].1969-08-29.
    [8]
    Schweikl L.Exhaust gas deflecting pipe:US,3525475[P].1970-08-25.
    [9]
    Woodward C S.Vectorable exhaust nozzle for a gas turbine engine:US,4679732[P].1987-06-14.
    [10]
    王占学,刘帅,周莉.S/VTOL战斗机用推力矢量喷管技术的发展及关键技术分析[J].航空发动机,2014,40(4):1-6. WANG Zhanxue,LIU Shuai,ZHOU Li.Development and critical technology analysis on technology of short/vertical takeoff and landing fighter[J].Aeroengine,2014,40(4):1-6.(in Chinese)
    [11]
    杨世学.柔性喷管力矩特性的识别[J].宇航学报,1989,10(4):16-22. YANG Shixue.Identification of the torque characteristics of the flexible joint nozzle[J].Journal of Astronautics,1989,10(4):16-22.(in Chinese)
    [12]
    杨世学.柔性喷管全轴摆动动态特性分析与计算[J].宇航学报,1985,6(1):59-77. YANG Shixue.The analysis and calculation for the dynamic characteristics of the omniaxial movable flexible joint nozzle[J].Journal of Astronautics,1985,6(1):59-77.(in Chinese)
    [13]
    尤军锋,张永敬,常新龙.球窝喷管接触应力及摆动力矩计算[J].固体火箭技术,2001,24(3):20-24. YOU Junfeng,ZHANG Yongjing,CHANG Xinlong.Calculation of the contact stress and deflection torque of ball socket nozzle[J].Journal of Solid Rocket Technology,2001,24(3):20-24.(in Chinese)
    [14]
    杨思孝.珠承全轴摆动喷管的设计和分析[J].固体火箭技术,1993(3):23-30. YANG Sixiao.Design and analysis of a bead support bearing-gimbaled nozzle[J].Journal of Solid Rocket Technology,1993(3):23-30.(in Chinese)
    [15]
    刘帅,王占学,周莉,等.三轴承旋转喷管矢量偏转规律及流场特性研究[J].推进技术,2015,36(5):656-663. LIU Shuai,WANG Zhanxue,ZHOU Li,et al.Three bearing swivel nozzle vector deflection law study and fluid field calculation[J].Journal of Propulsion Technology,2015,36(5):656-663.(in Chinese)
    [16]
    刘增文,李瑞宇,刘帅,等.三轴承旋转喷管型面设计与运动规律研究[J].机械设计与制造,2014(7):65-67. LIU Zengwen,LI Ruiyu,LIU Shuai,et al.Study on three bearing swivel nozzle inner contour design and motion law of the nozzle[J].Machinery Design and Manufacture,2014(7):65-67.(in Chinese)
    [17]
    杨帆,刘增文,刘帅,等.三轴承旋转喷管型面设计与分析[J].航空计算技术,2014,44(2):77-80. YANG Fan,LIU Zengwen,LIU Shuai,et al.Design and analysis of three bearing swivel nozzle inner contour[J].Aeronautical Computing Technique,2014,44(2):77-80.(in Chinese)
    [18]
    王新月.气体动力学基础[M].西安:西北工业大学出版社,2006.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(1136.0KB)
    XML

    Article Metrics

    Article views (1323) PDF downloads(726) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return