| Citation: | WANG Tao, HU Dian-yin, WANG Rong-qiao. Compliance verification method for pressurized engine static parts of aircraft engine airworthiness[J]. Journal of Aerospace Power, 2016, 31(12): 2957-2964. doi: 10.13224/j.cnki.jasp.2016.12.018
|
| [1] |
李家祥.关于修订《航空发动机适航规定》的说明[R].北京:中国民用航空局,2011.
|
| [2] |
Deflorio F.Airworthiness an introduction to aircraft certification a guide to understanding JAA,EASA,and FAA standards[M].[S.l.]:Elsevier,2006.
|
| [3] |
谢剑豪.对国外民用航空发动机适航标准的分析[J].航空标准化与质量,1987(3):11-13. XIE Jianhao.Analysis on foreign civil aircraft engine airworthiness standards[J].Aeronautic Standardization and Quality,1987(3):11-13.(in Chinese)
|
| [4] |
Gao Y,Zhou Y.Airworthiness management of CFM56 products in FAA and EASA[J].Procedia Engineering,2011,17:588-594.
|
| [5] |
丁水汀,张弓,蔚夺魁,等.航空发动机适航概率风险评估方法研究综述[J].航空动力学报,2011,26(7):1441-1451. DING Shuiting,ZHANG Gong,YV Duokui,et al.Review of probabilistic risk assessment on aero-engine airworthiness[J].Journal of Aerospace Power,2011,26(7):1441-1451.(in Chinese)
|
| [6] |
European Aviation Safety Agency.CS-E Certification specification for engine[S].Koeln DC,Germany:European Aviation Safety Agency,2010.
|
| [7] |
曹继军,张越梅,赵平安.民用飞机适航符合性验证方法探讨[J].民用飞机设计与研究,2008(4):37-41. CAO Jijun,ZHANG Yuemei,ZHAO Pingan.Discussion on the method of verification for civil aircraft airworthiness requirements[J].Civil Aircraft Design and Research,2008(4):37-41.(in Chinese)
|
| [8] |
李卫平,谭伟,薛彩军,等.民用飞机发动机吊挂部段静力试验与静强度分析[J].南京航空航天大学学报,2011,43(6):732-737. LI Weiping,TAN Wei,XUE Caijun,et al.Static test and computational analysis for pylon of airliner engine[J].Journal of Nanjing University of Aeronautics and Astronautics,2011,43(6):732-737.(in Chinese)
|
| [9] |
张志强,贺俊,魏名山,等.某航空活塞发动机回火试验[J].航空动力学报,2013,28(8):1696-1701. ZHANG Zhiqiang,HE Jun,WEI Mingshan,et al.Backfire tests of an aircraft piston engine[J].Journal of Aerospace Power,2013,28(8):1696-1701.(in Chinese)
|
| [10] |
何子华.某飞机机身加装外挂后静力试验初步方案设计[D].西安:西北工业大学,2007. HE Zihua.Design of the fuselage with external static experiment scheme of a certain aircraft[D].Xi'an:Northwestern Polytechnical University,2007.(in Chinese)
|
| [11] |
王大伟,王伟,冯振宇.民用航空发动机限寿件适航符合性方法[J].科技导报,2013,31(13):49-53. WANG Dawei,WANG Wei,FENG Zhenyu.Airworthiness compliance of life-limited part of civil aircraft engine[J].Science and Technology Review,2013,31(13):49-53.(in Chinese)
|
| [12] |
刘恢先.航空发动机机匣静力试验方法及其试验组合件:中国,201010518140.X[P].2011-04-20.
|
| [13] |
梁技,杨飞,杨智春.现代民用飞机气动弹性模型低速风洞试验适航符合性验证技术研究[J].振动与冲击,2013,32(12):1-5. LIANG Ji,YANG Fei,YANG Zhichun.Airworthiness compliance validating technique for wind tunnel test of a civil aircraft low speed flutter model[J].Journal of Vibration and Shock,2013,32(12):1-5.(in Chinese)
|
| [14] |
张宝诚.航空发动机试验和测试技术[M].北京:北京航空航天大学出版社,2005.
|
| [15] |
《中国航空材料手册》编辑委员会.中国航空材料手册[M].北京:中国标准出版社,2002.
|
| [16] |
林左鸣.世界航空发动机手册[M].北京:航空工业出版社,2012.
|
| [17] |
李斌,吴亚东,滕金芳,等.压气机中介机匣几何结构的试验验证[J].航空动力学报,2013,28(10):2326-2331. LI Bin,WU Yadong,TENG Jinfang,et al.Experimental validation of geometry of compressor intermediate casing[J].Journal of Aerospace Power,2013,28(10):2326-2331.(in Chinese)
|
| [18] |
蔡一平,龚梦贤.核心机涡轮后机匣强度和稳定性计算[J].航空计算技术,1994(2):13-18. CAI Yiping,GONG Mengxian.Calculation of casing strength and stability of the core machine[J].Aeronautical Computing Technique,1994(2):13-18.(in Chinese)
|
DownLoad: