Volume 32 Issue 1
Jan.  2017
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2017  >  32(1): 138-147
Calculation method of external meshed gear tooth root bending stress of high contact ratio gear.[J]. Journal of Aerospace Power, 2017, 32(1): 138-147. doi: 10.13224/j.cnki.jasp.2017.01.019
Citation: Calculation method of external meshed gear tooth root bending stress of high contact ratio gear.[J]. Journal of Aerospace Power, 2017, 32(1): 138-147. doi: 10.13224/j.cnki.jasp.2017.01.019
shu

Calculation method of external meshed gear tooth root bending stress of high contact ratio gear.

doi: 10.13224/j.cnki.jasp.2017.01.019
  • Received Date: 2015-04-18
  • Publish Date: 2017-01-28
    Abstract
  • The tooth root bending stress calculation method of high contact ratio spur gear pair was studied. The gear tooth deformation and stiffness calculation of high contact ratio gear and load of single tooth were studied. The definition of load sharing ratio and the calculation method of high contact ratio gear tooth were given. The meshing point of high contact ratio gear pair with double teeth was taken as the point of computational load.The calculation method of tooth shape coefficient and stress concentration coefficient of double toothed meshing zone boundary of the dangerous section that located on position of high contact ratio gear tooth roots 30 degree transition curve were given. Calculation formulas of tooth root bending stress of the dangerous section was obtained. External gear pair with different contact ratios were designed, and the tooth root bending stress was tested by CL100 gear test machine. The test result show that, under high load, the tooth root bending stress theoretical calculation error of active gear is less than 785%, and the driven gear is less than 98%. Under low load, the tooth root bending stress theoretical calculation error of active gear is less than 241%, and the driven gear is less than 19%.

     

    • FullText(HTML)
  • loading
    • References(18)
  • [1]
    范垂本.齿轮强度和试验［M］.北京:机械工业出版社,1979.
    [2]
    吴继泽,王统.齿根过渡曲线与齿根应力［M］.北京:国防工业出版社,1989.
    [3]
    Kawalec A,Wiktor J,Ceglarek D.Comparative analysis of toothroot strength using ISO and AGMA standards in spur and helical gears with FEMbased verification［J］.Journal of Mechanical Design,2006,128(5):1141-1158.
    [4]
    周长江,唐进元,刘艳萍,等.齿轮传动设计两种计算标准的比较研究［J］.机械传动,2006,30(3):9-10,50. ZHOU Changjiang,TANG Jinyuan,LIU Yanping,et al.Comparative study of calculation of gear drive design by two standards［J］.Journal of Mechanical Transmission,2006,30(3):9-10,50.(in Chinese)
    [5]
    仙波正庄.高强度齿轮设计［M］.北京:机械工业出版社,1981.
    [6]
    WANG Jiande,Howard I.Finite element analysis of high contact ratio spur gears in mesh［J］.Journal of Tribology,2005,127(3):469-483.
    [7]
    LI Shuting.Effect of addendum on contact strength,bending strength and basic performance parameters of a pair of spur gears［J］.Mechanism and Machine Theory,2008,43(12):1557-1584.
    [8]
    方宗德,蒋孝煜,宋镜瀛.大重合度齿轮的性能研究［J］.齿轮,1987,11(1):27-32. FANG Zongde,JIANG Xiaoyu,SONG Jingying.Performance study of high contact ratio gear［J］.Gear Journal,1987,11(1):27-32.(in Chinese)
    [9]
    罗立风,陈谌闻.大重合度直齿轮刚度的测量研究与边界元计算［J］.齿轮,1991,15(2):5-10. LUO Lifeng,CHEN Zhanwen.Study of measurement stiffness and boundary element calculation of boundary element calculation［J］.Gear Journal,1991,15(2):5-10.(in Chinese)
    [10]
    李庆远,马成习.高重合度直齿渐开线圆柱齿轮传动承载能力与优化设计研究［J］.昆明工学院学报,1993,18(4):32-38. LI Qingyuan,MA Chengxi.Study on load capacity of involute spur HCR gear pairs and optimal design［J］.Journal of Kunming Institute of Technology,1993,18(4):32-38.(in Chinese)
    [11]
    尹刚.高重合度齿轮应力场有限元分析［J］.重庆大学学报,2010,33(7):53-57. YIN Gang.Finite element analysis of high contact ratio gear stress field［J］.Journal of Chongqing University,2010,33(7):53-57.(in Chinese)
    [12]
    李杰,张磊,赵旗.大重合度汽车变速器齿轮的接触应力与噪声分析［J］.汽车技术,2009（4）:7-10. LI Jie,ZHANG Lei,ZHAO Qi.Analysis on contact stress and noise of automobile transmission gears with high contact ratio［J］.Automobile Technology,2009（4）:7-10.(in Chinese)
    [13]
    唐进元,颜海燕.线外啮合齿轮传动啮合刚度计算［J］.机械传动,2002,26(4):22-24,32. TANG Jinyuan,YAN Haiyan.Gear mesh stiffness based on coner contact［J］.Journal of Mechanical Transmission,2002,26(4):22-24,32.(in Chinese)
    [14]
    颜海燕,唐进元,宋红光.直齿轮轮齿变形计算的数值积分法［J］.机械传动,2005,29(2):7-9. YAN Haiyan,TANG Jinyuan,SONG Hongguang.Numerical integral method for gear deformation calculation［J］.Journal of Mechanical Transmission,2005,29(2):7-9.(in Chinese)
    [15]
    Cornell R W.Compliance and stress sensitivity of spur gear teeth［J］.Journal of Mechanical Design,1981,103(2):447-459.
    [16]
    Tavakoli M S,Houser D R.Optimum profile modifications for the minimization of static transmission errors of spur gears［J］.Journal of Mechanical Design,1986,108(1):86-95.
    [17]
    唐定国,鄂中凯,朱孝禄,等.GB/T 34801997 渐开线圆柱齿轮承载能力计算方法［S］.北京:中国标准出版社,1997.
    [18]
    Niemann G.Machine elements:design and calculation in mechanical engineering［M］.New York:SpringerVerlag Berlin Heidelberg,1978.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(928.0KB)
    XML

    Article Metrics

    Article views (1289) PDF downloads(513) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return