Citation: | Impingement heat transfer inside wedge-shaped concave by jets from impingment plate with front-extended port[J]. Journal of Aerospace Power, 2017, 32(3): 592-598. doi: 10.13224/j.cnki.jasp.2017.03.010 |
[1] |
Cebeci T,Kafyeke F.Aircraft icing[J].Annual Review of Fluid Mechanics,2003,35:11-21.
|
[2] |
Brawn J K,Raghunathan S,Watterson J K,et al.Heat transfer correlation for Anti-icing systems[J].Journal of Aircraft,2002,39(1):65-70.
|
[3] |
Pellissier M P C,Habashi W G,Pueyo A.Optimization via FENSAP-ICE of aircraft hot-air anti-icing system[J].Journal of Aircraft,2011,48(1):265-276.
|
[4] |
Viskanta R.Heat transfer to impinging isothermal gas and flame jets[J].Experimental Thermal and Fluid Science,1993,6(2):111-134.
|
[5] |
Weigand B,Spring S.Multiple jet impingement:a review[J].Heat Transfer Research,2011,42(2):101-142.
|
[6] |
Choi M,Yoo H S,Yang G,et al.Measurements of impinging jet flow and heat transfer on a semi-circular concave surface[J].International Journal of Heat and Mass Transfer,2000,43(10):1811-1822.
|
[7] |
Kayansayan N,Kucuka S.Impingement cooling of a semi-cylindrical concave channel by confined slot air jet[J].Experimental Thermal and Fluid Science,2001,25(6):383-396.
|
[8] |
Fregeau M,Gabr M,Paraschivoiu I,et al.Simulation of heat transfer from hot-air jets impinging a three-dimensional concave surface[J].Journal of Aircraft,2009,46(2):721-726.
|
[9] |
Sharif M A R,Mothe K K.Parametric study of turbulent slot-jet impingement heat transfer from concave cylindrical surfaces[J].International Journal of Thermal Sciences,2010,49(2):428-442.
|
[10] |
Oztekin E,Aydin O,Avci M.Heat transfer in a turbulent slot jet flow impinging on concave surfaces[J].International Communications in Heat and Mass Transfer,2013,44(5):77-82.
|
[11] |
GUAN Tao,ZHANG Jingzhou,SHAN Yong.Convective heat transfer by tab-excited impinging jets on a wedge-shaped concave surface[J].International Journal of Thermal Sciences,2016,10:37-53.
|
[12] |
BU Xueqin,PENG Long,LIN Guiping,et al.Experimental study of jet impingement heat transfer on a variable-curvature concave surface in a wing leading edge[J].International Journal of Heat and Mass Transfer,2015,90:92-101.
|
[13] |
Esposito E I,Ekkad S V,Kim Y.Novel jet impingement cooling geometry for combustor liner backside cooling[J].Journal of Thermal Science and Engineering Applications,2009,1(2):427-432.
|
[14] |
TAN Xiaoming,ZHANG Jingzhou.Flow and heat transfer characteristics under synthetic jets impingement driven by piezoelectric actuator[J].Experimental Thermal and Fluid Science,2013,48(7):134-146.
|
[15] |
YU Yezhen,ZHANG Jingzhou,XU Huasheng.Convective heat transfer by a row of confined air jets from round holes equipped with triangular tabs[J].International Journal of Heat and Mass Transfer,2014,72:222-233.
|
[16] |
SHAN Yong,ZHANG Jingzhou,XIE Gongnan.Convective heat transfer for multiple rows of impinging air jets with small jet-to-jet spacing in a semi-confined channel[J].International Journal of Heat and Mass Transfer,2015,86:832-842.
|
[17] |
Cardone M,Ligrani P,Fox M,et al.Infrared thermography for convective heat transfer measurements[J].Journal of Thermophysics and Heat Transfer,2010,24:133-144.
|
[18] |
Moffat R J.Describing the uncertainties in experimental results[J].Experimental Thermal and Fluid Science,1988,1(1):3-17.
|