Citation: | A creep model based on normalized parameters[J]. Journal of Aerospace Power, 2017, 32(3): 683-688. doi: 10.13224/j.cnki.jasp.2017.03.021 |
[1] |
穆霞英.蠕变力学[M].西安:西安交通大学出版社,1990.
|
[2] |
Kassner M E,Pérez-Prado M T.Five-power-law creep in single phase metals and alloys[J].Progress in Materials Science,2000,45(1):1-102.
|
[3] |
饶寿期.航空发动机的高温蠕变分析[J].航空发动机,2004,30(1):10-13.RAO Shouqi.Analysis of high-temperature creep of aeroengines[J].Aeroengine,2004,30(1):10-13.(in Chinese)
|
[4] |
YAO Huatang,XUAN Fuzhen,WANG Zhengdong,et al.A review of creep analysis and design under multi-axial stress states[J].Nuclear Engineering and Design,2007,237(18):1969-1986.
|
[5] |
Kassner M E,Hayes T A.Creep cavitation in metals[J].International Journal of Plasticity,2003,19(10):1715-1748.
|
[6] |
Sawada K,Tabuchi M,Kimura K.Analysis of long-term creep curves by constitutive equations[J].Materials Science and Engineering:A,2009,510/511:190-194.
|
[7] |
Sherby O D,Burke P M.Mechanical behavior of crystalline solids at elevated temperature[J].Progress in Materials Science,1968,13:323-390.
|
[8] |
Swindeman R W,Swindeman M J.A comparison of creep models for nickel base alloys for advanced energy systems[J].International Journal of Pressure Vessels and Piping,2008,85(1):72-79.
|
[9] |
Miller A K.Modelling of cyclic plasticity with unified constitutive equations:improvements in simulating normal and anomalous Bauschinger effects[J].Journal of Engineering Materials and Technology,1980,102(2):215-222.
|
[10] |
Chaboche J L.Constitutive equations for cyclic plasticity and cyclic viscoplasticity[J].International Journal of Plasticity,1989,5(3):247-302.
|
[11] |
Bodner S R,Partom Y.Constitutive equations for elastic-viscoplastic strain-hardening materials[J].Journal of Applied Mechanics,1975,42(2):385-389.
|
[12] |
Andrade E N da C.On the viscous flow in metals and allied phenomena[J].Proceedings of the Royal Society:A Mathematical,Physical and Engineering Sciences,1910,84(567):1-12.
|
[13] |
Montes J M,Cuevas F G,Cintas J.New creep law[J].Materials Science and Technology,2012,28(3):377-379.
|
[14] |
Mukherjee A K,Bird J E,Dorn J E.Experimental correlations for high-temperature creep[J].Transactions of the American Society of Metals,1969,62(1):62-68.
|
[15] |
张俊善.材料的高温变形与断裂[M].北京:科学出版社,2007.
|
[16] |
Golan O,Arbel A,Eliezer D,et al.The applicability of Nortons creep power law and its modified version to a single-crystal superalloy type CMSX-2[J].Materials Science and Engineering:A,1996,216(1/2):125-130.
|
[17] |
Evans R W,Wilshire B.Creep of metals and alloys[M].London:the Institute of Metals,1985.
|
[18] |
刘姣,李振荣,王欣,等.一种GH4169G合金的组织与蠕变行为[J].材料热处理学报,2013,34(8):74-79.LIU Jiao,LI Zhenrong,WANG Xin,et al.Microstructure and creep behavior of a GH4169G superalloy[J].Transactions of Materials and Heat Treatment,2013,34(8):74-79.(in Chinese)
|