| Citation: | Mathematical model of performance prediction of axisymmetric vectoring nozzle based on numerical simulations[J]. Journal of Aerospace Power, 2017, 32(4): 909-916. doi: 10.13224/j.cnki.jasp.2017.04.016 |
| [1] |
Orme J S,Way R H,Ferguson D M.Initial flight test evaluation of the F-15 active axisymmetric vectoring nozzle performance[R].AIAA 98-3871,1998.
|
| [2] |
Wilson E A,Adler D,Bal-Or B Z,et al.Optimizing subcritical-flow thrust-vectoring of converging-diverging nozzles[J].Journal of Propulsion and Power,2000,16(3):202-206.
|
| [3] |
Carson G T,Jr.,Capone F J.Static internal performance of an axisymmetric nozzle with multiaxis thrust-vectoring capability[J].NASA TM-4237,1991.
|
| [4] |
Matesanz A,Velazquez A,Rodriguez M.Performance analysis of an axisymmetric thrust-vectoring nozzle by using the FUNSIF3D code[J].AIAA 95-2743,1995.
|
| [5] |
Orme J S,Sims R L.Selected performance measurement of the F-15 active axisymmetric thrust-vectoring nozzle[R].AIAA 99-2743,1999.
|
| [6] |
邵万仁.基于数值模拟的轴对称矢量喷管内流特性研究[J].航空动力学报,2008,23(5):822-829.SHAO Wanren.Study of internal performance for an axisymmetric vectoring nozzle using numerical simulation[J].Journal of Aerospace Power,2008,23(5):822-829.(in Chiese)
|
| [7] |
金捷,赵景芸,张明恒,等.轴对称矢量喷管壁面静压分布的试验研究[J].航空动力学报,2000,15(3):314-316.JIN Jie,ZHAO Jingyun,ZHANG Mingheng,et al.Experimrntal investigation on AVEN wall static pressure distributions[J].Journal of Aerospace Power,2000,15(3):314-316.(in Chinese)
|
| [8] |
Rebolo R,Arredondo P,Matesanz A,et al.Aerodynamics design of convergent-divergent nozzles[R].Monterey,CA:29th Joint Propulsion Conference and Exhibit,1993.
|
| [9] |
Matesanz A,Velazquez A,Rodriguez M.Numerical study on some fluid dynamics aspects of axisymmetric thrust vectoring nozzles[R].Indianapolis,IN:30th AIAA/ASME/SAE/ASEE Joint Propulsion Conference,1994.
|
| [10] |
Matesanz A,Velazquez A,Rodriguez M.Aerodynamics performance prediction of thrust-vectoring nozzles[J].Journal of Propulsion and Power,1998,14(2):241-246.
|
| [11] |
Wilson E A,Adler D,Bar-Yoseph P Z.Geometric evaluation of axisymmetric thrust-vectoring nozzles for aerodynamic performance predictions[J].Journal of Propulsion and Power,2002,18(3):712-716.
|
| [12] |
Wilson E A,Adler D,Bar-Yoseph P Z.Nozzle performance modeling[J].AIAA Journal,2002,40(7):1331-1338.
|
| [13] |
Wilson E A,Adler D,Bar-Yoseph P Z.Thrust-vectoring nozzle performance modeling[J].Journal of Propulsion and Power,2003,19(1):39-47.
|
| [14] |
刘小勇,樊思齐,陈辅群.矢量喷管数学模型研究[J].航空动力学报,1998,13(1):49-52.LIU Xiaoyong,FAN Siqi,CHEN Fuqun.A thrust-vectoring nozzle math model[J].Journal of Aerospace Power,1998,13(1):49-52.(in Chinese)
|
| [15] |
卢燕,樊思齐,马会民.轴对称矢量喷管数值模拟及数学模型研究[J].西北工业大学学报,2002,20(3):383-386.LU Yan,FAN Siqi,MA Huimin.On establishing the mathematical model for axisymmetric thrust-vectoring nozzle[J].Journal of Northwestern Polytechnical University,2002,20(3):383-386.(in Chinese)
|
| [16] |
马会民.矢量喷管非定常流场计算与动态数学模型研究[D].西安: 西北工业大学,2003.MA Huimin.Study on the unsteady flow calculation and transient mathematical model of vectoring nozzle[D].Xian:Northwestern Polytechnical University,2003.(in Chinese)
|
| [17] |
于芳芳,邓小宝,马争胜,等.矢量偏转对轴对称喷管性能的影响[J].航空计算技术,2008,38(3):52-55.YU Fangfang,DENG Xiaobao,MA Zhengsheng,et al.Effect of vectoring deflection on performance of axisymmetric nozzle[J].Aeronautical Computing Technique,2008,38(3):52-55.(in Chinese)
|
| [18] |
姜健飞,胡良剑,唐俭.数值分析机器MATLAB实验[M].北京:科学出版社,2004.
|