| Citation: | Effect of cutting parameters on average scallop height for tooth surface of spiral bevel gears[J]. Journal of Aerospace Power, 2017, 32(7): 1690-1697. doi: 10.13224/j.cnki.jasp.2017.07.020
|
| [1] |
吴福忠.基于包络面构建的等残留高度刀具路径规划［J］.农业机械学报,2009,40(1):217-221.WU Fuzhong.Constant scallop height tool path planning by constructing envelope surface［J］.Transactions of the Chinese Society for Agricultural Machinery,2009,40(1):217-221.(in Chinese)
|
| [2] |
郝小忠,DUROOBI A A A,陈文亮,等.环形刀等残留高度多轴加工步距计算［J］.南京航空航天大学学报,2012,44(4):538-542.HAO Xiaozhong,DUROOBI A A A,CHEN Wenliang,et al.Calculation of stepover based on constant scallop-height in multi-axis torus milling process［J］.Journal of Nanjing University of Aeronautics and Astronautics,2012,44(4):538-542.(in Chinese)
|
| [3] |
彭芳瑜,方正隆,吴警,等.基于点云的超精密铣削加工三维表面形貌仿真［J］.华中科技大学学报（自然科学版）,2012,40(8):1-6.PENG Fangyu,FANG Zhenglong,WU Jing,et al.Three-dimensional surface topography simulation of ultra precision milling based on point cloud［J］.Journal of Huazhong University of Science and Technology(Natural Science Edition),2012,40(8):1-6.(in Chinese)
|
| [4] |
梁鑫光,姚振强.基于动力学响应的球头刀五轴铣削表面形貌仿真［J］.机械工程学报,2013,49(6):171-178.LIANG Xinguang,YAO Zhenqiang.Dynamic-based simulation for machined surface topography in 5-axis ball-end milling［J］.Journal of Mechanical Engineering,2013,49(6):171-178.(in Chinese)
|
| [5] |
ANTONI W,MOHANNAD I D.Kernel based regression and genetic algorithms for estimating cutting conditions of surface roughness in end milling machining process［J］.Expert Systems with Applications,2012，39(14)：11634-11641.
|
| [6] |
PLAKHOTNIK D,LAUWERS B.Computing of the actual shape of removed material for five-axis flat-end milling［J］.Computer-Aided Design,2012，44:1103-1114.
|
| [7] |
RAMESH S,KARUNAMOORTHY L,PALANIKUMAR K.Measurement and analysis of surface roughness in turning of aerospace titanium (GR5)［J］.Measurement,2012，45（5）:1266-1276.
|
| [8] |
ROUTARA B C,SAHOO A K,PARIDA A K,et al.Response surface methodology and genetic algorithm used to optimize the cutting condition for surface roughness parameters in CNC turning［J］.Procedia Engineering,2012，38:1893-1904.
|
| [9] |
ZAIN A M,HARON H,SHARIF S.Prediction of surface roughness in the end milling machining using artificial neural network［J］.Expert Systems with Applications,2010，37（2）:1755-1768.
|
| [10] |
EDWARD M,LUKASZ N.Analysis and verification of surface roughness constitution model after machining process［J］.Procedia Engineering,2012，39:395-404.
|
| [11] |
YUAN Entao,SHAO Bing.Tool-path generation of multi-axis machining for subdivision surface［J］.AASRI Procedia,2012，3:60-65.
|
| [12] |
LHAN A,HARUN A.Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method［J］.Measurement,2011,44(9):1697-1704.
|
| [13] |
LHAN A,MEHMET C.Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method［J］.Expert Systems with Applications,2011,38(5):5826-5832.
|
| [14] |
韩佳颖,王太勇,李清,等.螺旋锥齿轮滚切加工残留高度的精确计算［J］.机械科学与技术,2012,31(1):83-86.HAN Jiaying,WANG Taiyong,LI Qing,et al.Accurate calculation for spiral bevel gear generated cutting scallop height［J］.Mechanical Science and Technology for Aerospace Engineering,2012,31(1):83-86.(in Chinese)
|
| [15] |
明兴祖,严宏志,陈书涵.多轴数控磨削螺旋锥齿轮的表面粗糙度研究［J］.中国机械工程,2009,20(20):2470-2476.MING Xingzu,YAN Hongzhi,CHEN Shuhan.Research on surface roughness for multi-axis NC grinding of spiral bevel gear［J］.China Mechanical Engineering,2009,20(20):2470-2476.(in Chinese)
|
| [16] |
张华,邓效忠.四轴数控螺旋锥齿轮铣齿机变性法铣齿研究［J］.中国机械工程,2007,18(14):1652-1655.ZHANG Hua,DENG Xiaozhong.Modified-roll method study on 4-axis CNC spiral bevel gear machine［J］.China Mechanical Engineer,2007,18(14):1652-1655.(in Chinese)
|
| [17] |
LITVIN F L.Gear geometry and applied theory［M］.Cambridge:Combridge University Press,2004.
|
| [18] |
李天兴,邓效忠,李聚波,等.螺旋锥齿轮齿面误差分析与自动反馈修正［J］.航空动力学报,2011,26（5）:1194-1200.LI Tianxing,DENG Xiaozhong,LI Jubo,et al.Automatic feedback correction and deviation analysis for tooth surface of spiral bevel and hypoid gear［J］.Journal of Aerospace Power,2011,26（5）:1194-1200.(in Chinese)
|
DownLoad: