| Citation: | Uncertainty analysis of machining error influence of compressor blade[J]. Journal of Aerospace Power, 2017, 32(9): 2253-2259. doi: 10.13224/j.cnki.jasp.2017.09.025
|
| [1] |
汤振宁.航空发动机叶片数控铣削方法研究［D］.沈阳：沈阳工业大学,2007. TANG Zhenning.Aircraft engine blade CNC milling method［D］.Shenyang: Shenyang University of Technology,2007.(in Chinese)
|
| [2] |
金秀杰,马艳玲,高见.压气机叶片型面精密数控加工技术［R］.贵阳:第15届中国科协年会,2013.
|
| [3] |
刘维伟,李杰光,赵明,等.航空发动机薄壁叶片加工变形误差补偿技术研究［J］.机械设计与制造,2009,47(10):175-177. LIU Weiwei,LI Jieguang,ZHAO Ming,et al.Research on the compensation of deformation error in NC machining of thinwalled blades［J］.Journal of Machinery Design and Manufacture,2009,47(10):175-177.(in Chinese)
|
| [4] |
GARZON V E.Probabilistic aero thermal design of compressor airfoils［D］.Cambridge,Massachusetts:Massachusetts Institute of Technology,2003.
|
| [5] |
张伟昊,邹正平,李维,等.叶型偏差对涡轮性能影响的非定常数值模拟研究［J］.航空学报,2010,31(11):2130-2138. ZHANG Weihao,ZOU Zhengping,LI Wei,et al.Unsteady numerical simulation investigate of effect of blade profile deviation on turbine performance［J］.Acta Aeronautica et Astronautica Sinica,2010,31(11):2130-2138.(in Chinese)
|
| [6] |
李宇,邹正平,刘火星,等.叶片安装角偏差对涡轮通道内热斑迁移的影响［J］.工程热物理学报,2009,30(6):944-948. LI Yu,ZOU Zhengping,LIU Huoxing,et al.Influence of bladestagger departure on the migration of hot streak in turbine passage［J］.Journal of Engineering Thermophysics,2009,30(6):944-948.(in Chinese)
|
| [7] |
陆宏志,吴洋洲,陆利蓬,等.压气机叶片前缘楔形角对前缘分离泡的影响［J］.工程热物理学报,2002,23(5):569-572. LU Hongzhi,WU Yangzhou,LU Lipenget al.The influence of the compressor blade leading edge wedge angle on the leading edge separation bubble［J］.Journal of Engineering Thermophysics,2002,23(5):569-572.(in Chinese)
|
| [8] |
刘火星,李凌,蒋浩康,等.二维NACA65叶型前缘几何形状对气动性能的影响［J］.工程热物理学报,2003,24(2):231-233. LIU Huoxing,LI Ling,JIANG Haokang,et al.Effect of leadingedge geometry on separation bubble on a NACA65 compressor blade［J］.Journal of Engineering Thermophysics,2003,24(2):231-233.(in Chinese)
|
| [9] |
ROELKE R J,HAAS J E.The Effect of rotor blade thickness and surface finish on the performance of a small axial flow turbine［J］.Journal of Engineering of Gas Turbines and Power,1983,105(2):377-382.
|
| [10] |
SUDER K L,CHIMA R V,STRAZISAR A J,et al.The effect of adding roughness and thickness to a transonic axial compressor rotor［J］.Journal of Turbo Machinery,1995,117(4):491-505.
|
| [11] |
PANIAGUA G,DINOS R,ALMEIDA S.Effect of the hub endwall cavity flow on the flowfield of a transonic highpressure turbine［J］.Journal of Turbo Machinery,2004,126(4),578-586.
|
| [12] |
GARZON V E,DARMOFAL D L.Impact of geometric variability on axial compressor performance［J］.Journal of Turbo Machinery,2003,125(4):1199-1213.
|
| [13] |
杨小东,刘波,张国臣,等.基于人工蜂群算法与NURBS的吸附式叶型优化设计［J］.航空动力学报,2014,19(8):1855-1862. YANG Xiaodong,LIU Bo,ZHANG Guochen,et al.Optimization of aspirated airfoil based on artificial bee colony algorithm and NURBS［J］.Journal of Aerospace Power,2014,29(8):1855-1862.(in Chinese)
|
| [14] |
郭雪岩,张海军,戴韧.基于NURBS和梯度法的飞艇形状优化［J］.航空动力学报,2011,26(2):2812-2819. GUO Xueyan,ZHANG Haijun,DAI Ren.Airship shape optimization with NURBS and gradient based algorithms［J］.Journal of Aerospace Power,2011,26(2):2812-2819.(in Chinese)
|
| [15] |
苗森春,杨军虎,王晓晖,等.基于神经网络遗传算法的液力透平叶片型线优化［J］.航空动力学报,2015,30(8):1918-1925. MIAO Senchun,YANG Junhu,WANG Xiaohui,et al.Blade pattern optimization of the hydraulic turbine based on neural network and genetic algorithm［J］.Journal of Aerospace Power,2015,30(8):1918-1925.(in Chinese)
|
| [16] |
李晓军,王长虹,朱合华,等.Kriging插值方法在地层模型生成中的应用［J］.岩土力学,2009,30(1):157-162. LI Xiaojun,WANG Changhong,ZHU Hehua,et al.Kriging interpolation and its application to generating stratum model［J］.Journal of Rock and Soil Mechanics,2009,30(1):157-162.(in Chinese)
|
| [17] |
韩永志,高行山,李立州,等.基于Kriging模型的涡轮叶片多学科设计优化［J］.航空动力学报,2007,22(7):1055-1059. HAN Yongzhi,GAO Xingshan,LI Lizhou,et al.Kriging model based multidisciplinary design optimization for turbine blade［J］.Journal of Aerospace Power,2007,22(7):1055-1059.(in Chinese)
|
| [18] |
刘克龙,姚卫星,穆雪峰.基于Kriging代理模型的结构形状优化方法研究［J］.计算力学学报,2006,23(3):344-347. LIU Kelong,YAO Weixing,MU Xuefeng.A method of structural shape optimization based on Kriging model［J］.Chinese Journal of Computation Mechanics,2006,23(3):344-347.(in Chinese)
|
DownLoad: