| Citation: | Test on heat transfer characteristics of high pressure turbine casing with active clearance control system[J]. Journal of Aerospace Power, 2018, 33(1): 165-173. doi: 10.13224/j.cnki.jasp.2018.01.020
|
| [1] |
LATTIME S B,STEINETZ B M.Highpressureturbine clearance control system:current practices and future directions［J］.Journal of Propulsion and Power,2004,20(2):302-311.
|
| [2] |
曾军,王鹏飞.民用航空发动机涡轮叶尖间隙主动控制技术分析［J］.航空科学技术,2012,134（2）:1-6.ZENG Jun,WANG Pengfei.Analysis on turbine active clearance control technology of civil aircraft engine［J］.Journal of Aeronautical Science and Technology,2012,134（2）:1-6.(in Chinese)
|
| [3] |
RICH S E,FASCHING W A.CF6 jet engine performance improvement:high pressure turbine active clearance control［R］.NASA CR-165556,1982.
|
| [4] |
GAFFIN W O.JT9D70/59 improved high pressure turbine active clearance control system［R］.NASA CR-159661,1979.
|
| [5] |
JAMBUNATHAN K,LAI E,MOSS M A,et al.A review of heat transfer data for single circular jet impingement［J］.International Journal of Heat and Fluid Flow,1992,13(2):106-115.
|
| [6] |
许全宏,林宇震,刘高恩.封闭空间内单孔冲击局部换热特性研究［J］.航空动力学报,2002,17（3）:341-343.XU Quanhong,LIN Yuzhen,LIU Gaoen.Investigation of impingemrnt heat transfer of single hole in a limited space［J］.Journal of Aerospace Power,2002,17（3）:341-343.(in Chinese)
|
| [7] |
GOLDSTEIN R J,BEHBAHANI A I.Impingement of a circular jet with and without crossflow［J］.International Journal of Heat Transfer,1982,25(9):1377-1382.
|
| [8] |
GOLDSTEIN R J,FRANEHETT M E.Heat transfer from a flat surface to an oblique impinging jet［J］.Journal of Heat Transfer,1988,110(2):84-90.
|
| [9] |
CHAMBERS A C,GILLESPIE R H.The effect of initial crossflow on the cooling performance of a narrow impingement channel［J］.Journal of Heat Transfer,2005,127(4):358-365.
|
| [10] |
张泽远,张靖周,杨卫华.半封闭通道射流冲击换热特性的实验［J］.航空动力学报,2006,21（4）:626-630.ZHANG Zeyuan,ZHANG Jingzhou,YANG Weihua.Convective heat transfer of jet impingement inside semiconfined channel［J］.Journal of Aerospace Power,2006,21（4）:626-630.(in Chinese)
|
| [11] |
FLORSCHUETZ L W,IAODA Y.Flow distribution and discharge coefficient for jet array impingement with initial crossflow［J］.Journal of Engineering for Power,1983,105(3):296-303.
|
| [12] |
FLORSCHUETZ L W,METZGER D E,SU C C.Heat transfer characteristics for jet array impingement with initial cross flow［R］.ASME Paper 83-GT-28,1983.
|
| [13] |
单文娟,毛军逵,李毅,等.斜向冲击强化换热特性试验［J］.航空动力学报,2013,28（3）:701-708.SHAN Wenjuan,MAO Junkui,LIYi,et al.Experimental on heat transfer characteristics with inclined impingement［J］.Journal of Aerospace Power,2013,28（3）:701-708.(in Chinese)
|
| [14] |
张井山,毛军逵,李毅,等.高压涡轮主动间隙控制机匣内部换热特性试验［J］.航空动力学报,2014,29（2）:299-304.ZHANG Jingshan,MAO Junkui,LI Yi,et al.Experimental on heat transfer characteristics inside the casing of high pressure turbine with active clearance control［J］.Journal of Aerospace Power,2014,29（2）:299-304.(in Chinese)
|
| [15] |
LIU Fangyuan,MAO Junkui.Experimental investigations about heat transfer characteristics of irregular impingement jet arrays in typical active clearance control system［R］.AIAA2015-2406,2015.
|
| [16] |
姜远刚,毛军逵,李毅,等.间隙主动控制系统中冷却空气管换热特性实验研究［J］.推进技术,2014,35（3）:365-371.JIANG Yuangang,MAO Junkui,LI Yi,et al.Experimental studies on heat transfer characteristics in air cooling pipe of turbine tip clearance control system［J］.Journal of Propulsion Technology,2014,35（3）:365-371.(in Chinese)
|
| [17] |
杜小琴,朱惠人,张宗卫,等.涡轮机匣壁面换热特性的数值计算［J］.航空工程进展,2010,1（4）：384-389.DU Xiaoqin,ZHU Huiren,ZHANG Zongwei,et al.Numerical study on the heat transfer characteristics of turbine casing［J］.Advances in Aeronautical Science and Engineering,2010,1（4）：384-389.（in Chinese）
|
| [18] |
张书华,张丽,朱惠人,等.涡轮机匣换热试验［J］.航空动力学报,2011,26（5）:1011-1016.ZHANG Shuhua,ZHANG Li,ZHU Huiren,et al.Experimental investigation of heat transfer characteristic in turbine casing［J］.Journal of Aerospace Power,2011,26（5）:1011-1016.(in Chinese)
|
DownLoad: