| Citation: | Numerical simulation of two-phase air/oil flow in high speed angular contact ball bearing chamber[J]. Journal of Aerospace Power, 2018, 33(5): 1103-1111. doi: 10.13224/j.cnki.jasp.2018.05.010
|
| [1] |
PINEL S I,SIGNER H R,ZARETSKY E V.Comparison between oil-mist and oil-jet lubrication of high-speed,small-bore,angular-contact ball bearings［J］.Tribology Transactions,2001,44(3):327-338.
|
| [2] |
GLAHN A,WITTING S,Two-phase air/oil flow in aero-engine bearing chambers:assessment of an analytical prediction method for the internal wall heat transfer［J］.Internal Journal of Rotating Machinery,1999,5(3):155-165.
|
| [3] |
GLAHN A,WITTING S.Two-phase air/oil flow in aero-engine bearing chambers:characterization of oil film flows［J］.Journal of Engineering for Gas and Turbines Power,1996,118(7):578-583.
|
| [4] |
OH I S,KIM D,HONG S W,et al.Three dimensional air flow patterns within a rotating ball bearing［J］.Advanced Science Letters,2013,19(8):2180-2183.
|
| [5] |
COE H H,ZARETSKY E V.Predicted and experimental performance of jet-lubricated 120-millimeter-bore ball bearings operating to 2.5 million DN ［R］.NASA TP-1196,1978.
|
| [6] |
HADDEN G B,KLECKNER R J,RAGEN M A,et a1.Steady state and transient thermal analysis of a shaft bearing system including ball,cylindrical,and tapered roller bearings ［R］.NASA CR-165365,1981.
|
| [7] |
WU C H,KUNG Y T.A parametric study on oil/air lubrication of a high-speed spindle［J］.Precision Engineering,2005,29(2):162-167.
|
| [8] |
吴昊天,陈国定.航空发动机轴承腔润滑的气液两相均匀流研究［J］.摩擦学学报,2007,27(1):78-82.WU Haotian,CHEN Guoding.Homogeneous flow of two phase gas/liquid flow in aero-engine bearing chamber［J］.Tribology,2007,27(1):78-82.(in Chinese)
|
| [9] |
吴昊天,陈国定.轴承腔油气两相泡状流动的数值研究［J］.机械工程学报,2008,44(9):70-75.WU Haotian,CHEN Guoding.Numerical research on two-phase gas/oil bubble flow in bearing chamber［J］.Chinese Journal of Mechanical Engineering,2008,44(9):70-75.(in Chinese)
|
| [10] |
CHEN B,CHEN G D,SUN H C,et al.Effect of oil droplet deformation on its deposited characteristics in an aero-engine bearing chamber［J］.Journal of Aerospace Engineering,2014,228(2):206-219.
|
| [11] |
HU J B,WU W,WU M X,et al.Numerical investigation of the air-oil two-phase flow inside an oil-jet lubricated ball bearing［J］.International Journal of Heat & Mass Transfer,2014,68:85-93.
|
| [12] |
GORSE P,DULLENKOPF K,BAUER H J,et al.An experimental study on droplet generation in bearing chambers caused by roller bearings［R］.ASME Paper GT2008-51281,2008.
|
| [13] |
孙恒超,陈国定,陈薄.航空发动机涡轮前支承轴承腔油气两相物理场分析［J］.西北工业大学学报,2013,31(1):72-76.SUN Hengchao,CHEN Guoding,CHEN Bo.Physical fields of oil/air two-phase in aeroengine bearing chamber in front of turbine［J］.Journal of Northwestern Polytechnical University,2013,31(1):72-76.(in Chinese)
|
| [14] |
车得福,李会雄.多相流及其应用［M］.西安:西安交通大学出版社,2007.
|
| [15] |
YIN Z,GUO Y L,SUNDEN B,et al.Numerical simulation of laminar film condensation in a horizontal minitube with and without non-condensable gas by the VOF method［J］.Numerical Heat Transfer,Part A:Applications,2015,68(9):958-977.
|
| [16] |
王福军.计算流体力学分析［M］.北京:清华大学出版社,2004.
|
| [17] |
BATCHELOR G K.An introduction to fluid dynamics［M］.Cambridge,UK:Cambridge University Press,2000.
|
| [18] |
刘红彬,张磊,史永生,等.高速滚动轴承环间气流特性数值模拟［J］.机械设计,2016,33(6):61-66.LIU Hongbin,ZHANG Lei,SHI Yongsheng,et al.Numerical simulation of airflow characteristics between rings of the high-speed rolling bearing［J］.Journal of Machine Design of China,2016,33(6):61-66.(in Chinese)
|
| [19] |
HARRIS T A,KOTZALAS M N.Rolling bearing analysis［M］.5th ed.Boca Raton,FL,USA:CRC Press,2006.
|
DownLoad: