Volume 33 Issue 5
May  2018
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2018  >  33(5): 1270-1280
Material defects data model of probabilistic risk assessment on life limited part[J]. Journal of Aerospace Power, 2018, 33(5): 1270-1280. doi: 10.13224/j.cnki.jasp.2018.05.030
Citation: Material defects data model of probabilistic risk assessment on life limited part[J]. Journal of Aerospace Power, 2018, 33(5): 1270-1280. doi: 10.13224/j.cnki.jasp.2018.05.030
shu

Material defects data model of probabilistic risk assessment on life limited part

doi: 10.13224/j.cnki.jasp.2018.05.030
  • Received Date: 2016-11-15
  • Publish Date: 2018-05-28
    Abstract
  • In order to meet the airworthiness requirements, a method for obtaining material defect (hard α inclusions) distribution data of typical titanium alloy was explored. According to the theoretical model of titanium alloy disk manufacturing process, the defect distribution baseline was acquired, using the detected defect distribution and the probability of detection(POD) of nondestructive test in the manufacturing process. The programs of POD test and microsection test, which meet the airworthiness requirements, were proposed. The key test technologies were determined to obtain POD curve and detected defects data, including specimen specifications, nitrogen mass fraction and distribution of hard alpha inclusions, ultrasonic test standard, steps of microsection, etc. Then, the exceedance curve of defect distribution was acquired by the use of theoretical deduction and logarithm linear fitting. The characteristics of material defects and airworthiness requirment were determines, then a method of obtaining POD curve and defect distribution curve was put forword.The method provides inputs for probabilistic risk assessment on aero-engine disk, supporting the airworthiness forensics of aero-engine disk.

     

    • FullText(HTML)
  • loading
    • References(28)
  • [1]
    SHAH A R,SHIAO M C,NAGPAL V K,Probabilistic evaluation of uncertainties and risk on aerospace components［R］.NASA TM105603,1992.
    [2]
    LEVERANT G R,LITTLEFIELD D L,MCCLUNG R C,et al.Probabilistic approach to aircraft turbine rotor material design［R］.ASME Paper 97-GT-22,1997.
    [3]
    ENRIGHT M P,MCCLUNG R C,HUYSE L.A probabilistic framework for risk prediction of gas turbine engine components with inherent or induced material anomalies ［R］.ASME Paper GT2005-68982,2005.
    [4]
    Federal Aviation Administration.Damage tolerance of hole features in high-energy turbine engine rotors:Advisory Circular 33.70-2［S］.Washington DC:Federal Aviation Administration,2009:4-6.
    [5]
    Federal Aviation Administration.Guidance material for aircraft engine life-limited parts requirements:Advisory Circular 33.70-1［S］.Washington DC:Federal Aviation Administration,2009:12-16.
    [6]
    丁水汀,张弓,蔚夺魁.航空发动机适航概率风险评估方法研究综述［J］,航空动力学报,2011,26(7)：1442-1451.DING Shuiting,ZHANG Gong,YU Duokui.Review of probabilistic risk assessment on aero-engine airworthiness ［J］.Journal of Aerospace Power,2011,26(7):1442-1451.(in Chinese)
    [7]
    LEVERANT G R,LITTLEFIELD D L,MCCLUNG R C,et al.Probabilistic approach to aircraft turbine rotor material design［R］.ASME Paper 97-GT-22,1997.
    [8]
    MILLWATER H R,ENRIGHT M P,FITCH S H K.A convergent probabilistic technique for risk assessment of gas turbine disks subject to metallurgical defects［R］.AIAA-2002-1382,2002.
    [9]
    ENRIGHT M P,HUYSE L.Methodology for probabilistic life prediction of multiple anomaly materials［J］.AIAA Journal,2006,44(4):787-793.
    [10]
    KAPPAS J.Review of risk and reliability methods for aircraft gas turbine engines［R］.Melbourne,Australia:DSTO Aeronautical and Maritime Research Laboratory,DSTO-TR-1306,2002.
    [11]
    COLE G K.Practical issues relating to statistical failure analysis of aero gas turbines［J］.Journal of Aerospace Engineering,1998,212(3):167-176.
    [12]
    MILLWATER H R,WU J,ENRIGHT M P.A probabilistically based damage tolerance analysis computer program for hard alpha defects in titanium rotors［R］.ASME Paper 2000-GT-0421,2000.
    [13]
    HUYSE L,ENRIGHT M P.Efficient statistical analysis of failure risk in engine rotor disks using importance sampling techniques［R］.AIAA-2003-1838,2003.
    [14]
    HUYSE L,ENRIGHT M P.Efficient conditional failure analysis application to an aircraft engine component［J］.Structure and Infrastructure Engineering,2006,2(3/4):221-230.
    [15]
    CLARK K R,DILLARD A B,HENDRIX B C,et al.The role of melt related defects in fatigue failures of Ti-6Al-4V［C］∥Proceedings of Titanium’92 Science and Technology Conference.Washington DC:The Minerals,Metals and Materials Society,1993:2867-2874.
    [16]
    蔡建明,马济民,郝孟.钛合金中的硬α夹杂及其等离子冷床炉熔炼控制技术［J］.失效分析与预防,2007,2(2):51-57.CAI Jianming,MA Jimin,HAO Meng.Titanium alloy hard alpha inclusions and plasma of cooling bed furnace smelting control technology［J］.Failure Analysis and Prevention,2007,2(2):51-57.(in Chinese)
    [17]
    MITCHELL A.The electron beam melting and refining of titanium alloys［J］.Materials Science and Engineering,1999,263(2):217-223.
    [18]
    AIAA.The development of anomaly distributions for aircraft engine titanium disk alloys［R］.AIAA 97-1068,1997.
    [19]
    冯振宇,李振兴.基于可靠性的裂纹检出概率曲线测定方法［J］.无损检测,2010,32(4):249-259.FENG Zhenyu,LI Zhenxing.Method of the crack detection probability curve based on the reliability［J］.Nondestructive testing,2010,32(4):249-259.(in Chinese)
    [20]
    SONG X,SARKAR P,VERONESI W.Virtual inspection:optimum sample size for POD experiment［J］.Quality Engineering,2002,14(4):623-644.
    [21]
    HELLER R A,STEVENS G H.Bayesian estimation of crack initiation time from service date ［J］.Journal of Aircraft,1978,15(11):794-798.
    [22]
    SAFIZADEH M S,FORSYTH D S,FAHR A.The effect of flaw size distribution on the estimation of POD ［J］.Insight,2004,46(6):355-359.
    [23]
    中国航空科学技术研究院.飞机结构可靠性分析和设计指南［M］.西安:西北工业大学出版社,1995.
    [24]
    沈海军,王宁,张戈.钛及钛合金中硬α夹杂及其去除方法［J］.上海金属,2010,32(2):38-39.SHEN Haijun,WANG Ning,ZHANG Ge.Titanium and titanium alloy hard alpha inclusions and their removal methods［J］.Shanghai Metal,2010,32(2):38-39.(in Chinese)
    [25]
    Federal Aviation Administration.Turbine rotor material design［R］.Washington DC:Federal Aviation Administration,DOT/FAA/AR-00/64,2000.
    [26]
    Federal Aviation Administration.Turbine rotor material design：PhaseⅡ［R］.Washington DC:Federal Aviation Administration,DOT/FAA/AR-07/13,2008.
    [27]
    林富甲,黄玉珊.裂纹检测概率曲线的统计测定［J］.航空学报,1982,3(4):21-27.LIN Fujia,HUANG Yushan.The statistical determination of the crack detection probability curve ［J］.Acta Aeronautica et Astronautica Sinica,1982,3(4):21-27.(in Chinese)
    [28]
    Federal Aviation Administration.Manufacturing process of premium quality titanium alloy rotating engine components:Advisory Circular 33.15-1［S］.Washington DC:Federal Aviation Administration,1998:1-2.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(1196.0KB)
    XML

    Article Metrics

    Article views (1156) PDF downloads(592) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return