| Citation: | Numerical analysis of effect of gas-solid coupled design on oblique impeller performances[J]. Journal of Aerospace Power, 2018, 33(9): 2170-2177. doi: 10.13224/j.cnki.jasp.2018.09.014
|
| [1] |
MUSGRAVE D S,PLEHN N J.Mixed-flow compressor stage design and test results with a pressure ratio of 3:1［J］.Journal of Turbomachinery,1987,109(4):513-519.
|
| [2] |
ELMENDORF W,KURZ H,GALLUS H E.Design and experimental investigation of a mixed-flow supersonic compressor stage［R］.ASME Paper 95-GT-0379,1995.
|
| [3] |
高星,刘宝杰.高比转速斜流叶轮流场分析［J］.航空动力学报,2008,23(5):889-894.GAO Xing,LIU Baojie.Analysis of flow in a high specific speed mixed flow compressor［J］.Journal of Aerospace Power,2008,23(5):889-894.(in Chinese)
|
| [4] |
任众,刘振侠,黄健.斜流压气机扩压器设计和流场的数值模拟研究［J］.航空计算技术,2011,41(4):35-44.REN Zhong,LIU Zhenxia,HUANG Jian.Design and numerical investigation of mixed-flow compressor diffuser［J］.Aeronautical Computing Technique,2011,41(4):35-44.(in Chinese)
|
| [5] |
张大义,洪杰,马艳红.高结构效率的斜流压气机结构设计［J］.航空动力学报,2013,28(4):866-871.ZHANG Dayi,HONG Jie,MA Yanhong.Novel structural design of mixed-flow compressor with high structural efficiency［J］.Journal of Aerospace Power,2013,28(4):866-871.(in Chinese)
|
| [6] |
EISENLOHR G,BENFER F E.Aerodynamic design and investigation of a mixed flow compressor［R］.Advisory Group for Aerospace Research and Development,AGARD-CP468,1993.
|
| [7] |
MONIG R,ELMENDOR F W.Design and rotor performance of a 5:1 mixed-flow supersonic compressor［J］.Journal of Turbomachinery,1993,155(3):565-572.
|
| [8] |
陶胜,周正贵,严欣.三维环境下离心-斜流压气机二维叶型优化设计［J］.航空动力学报,2014,29(12):2965-2972.TAO Sheng,ZHOU Zhengxin,YAN Xin.Optimization design of centrifugal/oblique flow compressor two dimensional blade profiles in three dimensional environment［J］.Journal of Aerospace Power,2014,29(12):2965-2972.(in Chinese)
|
| [9] |
张小伟,王延荣,张潇.涡轮机械叶片的流固耦合数值计算方法［J］.航空动力学报,2009,24(7):1622-1626.ZHANG Xiaowei,WANG Yanrong,ZHANG Xiao.Numerical method for fluid-structure interaction in turbomachinery bladings［J］.Journal of Aerospace Power,2009,24(7):1622-1626.(in Chinese)
|
| [10] |
王征,吴虎,史亚锋.基于CFD_CSD技术的压气机叶片流固耦合及颤振分析［J］.航空动力学报,2011,26(5):1077-1084.WANG Zheng,WU Hu,SHI Yafeng.Fluid-structure interaction and flutter analysis ofcompressor blade based on CFD_CSD［J］.Journal of Aerospace Power,2011,26(5):1077-1084.(in Chinese)
|
| [11] |
HAMID H,LAN W,Micheal C.Effect of blade deformation on the performance of a high flow coefficiency mixed flow impeller［J］.Journal of Turbomachinery,2013,137(12):1005-1009.
|
| [12] |
WIESNER F J.A review of slip factors for centrifugal impellers［J］.Journal of Engineering for Power,1967,89(4):558-572.
|
| [13] |
TTEODOR W,BACKSTROM V.A Unified correlation for slip factor in centrifugal impellers［J］.Journal of Turbomachinery,2005,128(1):1-10.
|
| [14] |
PAUER R,MULLER N.Impeller design for radial and mixed-flow compressors［R］.ASME Paper IMECE2004-61926,2004.
|
| [15] |
QIU Xuwen,MALLIKARACHCHI C,ANDERSON M.A new slip factor model for axial and radial impellers［R］.ASME Paper GT2007-27064,2007.
|
| [16] |
袁春.斜流叶轮的气动设计和叶片造型［D］.西安:西北工业大学,2002.YUAN Chun.Aerodynamics design of diagonal impeller and the blades design［D］.Xian:Northwestern Polytechnical University,2002.(in Chinese)
|
| [17] |
王琦,单鹏.径流及斜流压气机任意曲面叶型长短叶片的造型设计方法［J］.航空动力学报,2006,21(4):747-753.WANG Qi,SHAN Peng.Design of radial flow and mixed flow compressor rotor splitter-blades［J］.Journal of Aerospace Power,2006,21(4):747-753.(in Chinese)
|
| [18] |
冀国锋,桂幸民.轴流/离心压气机叶片通用任意中弧造型设计方法［J］.航空动力学报,2009,24(1):150-156.JI Guofeng,GUI Xingmin.A blading design method for axial/centrifugal compressor air foils using arbitrary camber lines［J］.Journal of Aerospace Power,2009,24(1):150-156.(in Chinese)
|
| [19] |
樊小莉,刘云飞,郭然.轴流压气机转子叶片的流固耦合分析［J］.工程热物理学报,2012,33(2):218-221.FAN Xiaoli,LIU Yunfei,GUO Ran.The research and application on coupled fluid-structure simulation of compressor rotor［J］.Journal of Engineering Thermophysics,2012,33(2):218-221.(in Chinese)
|
DownLoad: