| Citation: | Experiment on sealing characteristics of bolted flanged connections for aero-engines[J]. Journal of Aerospace Power, 2018, 33(10): 2315-2323. doi: 10.13224/j.cnki.jasp.2018.10.002
|
| [1] |
高杰,郑群,李义进.动叶顶部蜂窝面迷宫密封对涡轮级气动性能的影响［J］.航空动力学报,2012,27(1):160-168.GAO Jie,ZHENG Qun,LI Yijin.Effect of labyrinth-honeycomb seal of shrouded rotor blades on the aerodynamic performance of the turbine stage［J］.Journal of Aerospace Power,2012,27(1):160-168.(in Chinese)
|
| [2] |
苏华,陈国定.指尖密封的温度场及热结构耦合分析［J］.航空动力学报,2009,24(1):196-203.SU Hua,CHEN Guoding.Analysis of temperature field and coupled thermal and structure for finger seal［J］.Journal of Aerospace Power,2009,24(1):196-203.(in Chinese)
|
| [3] |
李理科,王之栎,宋飞,等.刷式密封温度场数值研究［J］.航空动力学报,2010,25(5):1018-1024.LI Like,WANG Zhili,SONG Fei,et al.Numerical investigation of temperature field in brush seals［J］.Journal of Aerospace Power,2010,25(5):1018-1024.(in Chinese)
|
| [4] |
闫玉涛,李雪娟,胡广阳,等.石墨密封材料高温摩擦磨损行为及预测［J］.航空动力学报,2014,29(2):314-320.YAN Yutao,LI Xuejuan,HU Guangyang,et al.Friction/ wear behaviors and predication of graphite seal materials under high temperature［J］.Journal of Aerospace Power,2014,29(2):314-320.(in Chinese)
|
| [5] |
胡广阳.航空发动机密封技术研究［J］.航空发动机,2012,38(3):1-4.HU Guangyang.Applicationresearch of seal technologies for aeroengine［J］.Aeroengine,2012,38(3):1-4.(in Chinese)
|
| [6] |
陈光.航空发动机结构设计分析［M］.北京:北京航空航天大学出版社,2006.
|
| [7] |
赵廷渝.航空燃气涡轮动力装置［M］.成都:西南交通大学出版社,2004.
|
| [8] |
《航空发动机设计手册》总编委会.航空发动机设计手册：第17册 载荷及机匣承力件强度分析［M］.北京:航空工业出版社,2001.
|
| [9] |
BIBEL G D,EZELL R M.An improved flange bolt-up procedure using experimentally determined elastic interaction coefficients［J］.Journal of Pressure Vessel Technology,1992,114(4):439-443.
|
| [10] |
NASSAR S A,ALKELANI A A.Clamp load loss due to elastic interaction and gasket creep relaxation in bolted joints［J］.Journal of Pressure Vessel Technology,2006,128(3):394-401.
|
| [11] |
ALKELANI A A,NASSAR S A,HOUSARI B A.Formulation of elastic interaction between bolts during the tightening of flat-face gasketed joints［J］.Journal of Mechanical Design,2009,131(2):519-528.
|
| [12] |
TAKAKI T,FUKUOKA T.Effective bolting up procedure using finite element analysis and elastic interaction coefficient method［R］.New York:American Society of Mechanical Engineers,2004.
|
| [13] |
American Society Mechcenical Engineers.Guidelines for pressure boundary bolted flange joint assembly:ASME PCC-1—2000［S］.New York:American Society Mechcenical Engineers,2000.
|
| [14] |
American Society Mechcenical Engineers.Guidelines for pressure boundary bolted flange joint assembly:ASME PCC-1—2010［S］.New York:American Society Mechcenical Engineers,2010.
|
| [15] |
Japanese Industrial Standards Committee.Bolt tightening procedure for pressure boundary flanged joint assembly：JIS B 2251—2008［S］.Tokyo:Japanese Industrial Standards Committee,2008.
|
| [16] |
TSUJI H,TERUI Y.Application of bolted flange joint assembly guidelines HPIS Z103 TR to EPTFE sheet gasket［R］.New York:ASME-PVP,2008.
|
| [17] |
喻健良,闫兴清,刘明,等.顺次及交叉加载方案下螺栓弹性交互作用规律［J］.压力容器,2011,28(10):1-8.YU Jianliang,YAN Xingqing,LIU Ming,et al.Elastic interaction rules between bolts during cross and sequential bolt-up process［J］.Pressure Vessel Technology,2011,28(10):1-8.(in Chinese)
|
| [18] |
KIRKEMO F.Design of compact flange joints［R］.Vancover,Britlsh Colombla,Canada:ASME-PVP,2002.
|
| [19] |
王凤超.浅析密封与螺栓紧固顺序和紧固扭矩的关系［J］.石油化工设备技术,2014,35(3):50-52.WANG Fengchao.Brief analysis on the relationship among sealing,bolt tightening sequence and tightening torque［J］.Petro-Chemical Equipment Technology,2014,35(3):50-52.(in Chinese)
|
| [20] |
蔡仁良,蔡暖姝,尤子涵,等.螺栓法兰接头安全密封技术(一):安装螺栓载荷［J］.化工设备与管道,2012,49(3):12-17.CAI Renliang,CAI Nuanshu,YOU Zihan,et al.Safe sealing technology for bolted flange connection(1)：assembly bolt load［J］.Process Equipment and Piping,2012,49(3):12-17.(in Chinese)
|
| [21] |
郭大伟,王妍妍.无垫片焊接密封法兰唇焊结构的泄漏原因及改进［J］.化工装备技术,2013,6(3):62-64.GUO Dawei,WANG Yanyan.Leakage cause and improvement of welding outside-edge of seal flange welded without gasket［J］.Chemical Equipment Technology,2013,6(3):62-64.(in Chinese)
|
| [22] |
周坤,刘美红.法兰螺栓连接中螺栓预紧力的计算和控制方法分析［J］.新技术新工艺,2010(8):26-28.ZHOU Kun,LIU Meihong.Analysis of calculation and control methods of the bolt preload in the flange bolts connection［J］.New Technology and New Process,2010(8):26-28.(in Chinese)
|
| [23] |
倪永良,崔琴.无垫片焊唇密封法兰螺栓载荷的分析与计算［J］.压力容器,2014,31(9):41-46.NI Yongliang,CUI Qin.Analysis and calculation of no gasket welding lip seal flange bolt load［J］.Pressure Vessel Technology,2014,31(9):41-46.(in Chinese)
|
| [24] |
顾伯勤,朱洪生.螺栓法兰连接的紧密性分析［J］.石油化工设备,1988,17(1):16-20.
|
| [25] |
蔡仁良.流体密封技术:原理与工程应用［M］.北京:化学工业出版社,2013.
|
DownLoad: