Volume 33 Issue 12
Dec.  2018
Turn off MathJax
Article Contents
Research on quality achieving reliability of bearing based on fuzzy weight[J]. Journal of Aerospace Power, 2018, 33(12). doi: 10.13224/j.cnki.jasp.2018.12.023
Citation: Research on quality achieving reliability of bearing based on fuzzy weight[J]. Journal of Aerospace Power, 2018, 33(12). doi: 10.13224/j.cnki.jasp.2018.12.023

Research on quality achieving reliability of bearing based on fuzzy weight

doi: 10.13224/j.cnki.jasp.2018.12.023
  • Received Date: 2017-08-05
  • Publish Date: 2018-12-28
  • Based on the theory of fuzzy mathematics, the method to determine the weight of bearing quality influencing factors was put forward. The original model of quality achieving reliability was modified and the improved model of bearing quality achieving reliability was proposed. Then the true value and true value interval of bearing quality achieving reliability were further estimated based on the maximum entropy principle. Taking two kinds of tapered roller bearing, 30306 and 30204, as experimental objects, it was found that the deviation of the original reliability model calculation from the test results was 20%-35%, and the deviation of the improved reliability model calculation from the test results was 12%-14%, which was reduced by 8%-21%. It can be known that the improved reliability model is more accurate than the original reliability model.

     

  • loading
  • [1]
    金光.小子样条件下航天轴承性能可靠性建模与评估[J].国防科技大学学报,2010,32(1):133-137.JIN Guang.Performance reliability modeling and estimation for space bearing under small sample circumstance[J].Journal of National University of Defense Technology,2010,32(1):133-137.(in Chinese)
    [2]
    宋军强,汤丽丽,潘慕绚,等.航空发动机分布式控制拓扑结构优化方法[J].航空动力学报,2016,31(6):1435-1440.SONG Junqiang,TANG Lili,PAN Muxuan,et al.Aero-engine distributed control system topology optimization method[J].Journal of Aerospace Power,2016,31(6):1435-1440.(in Chinese)
    [3]
    由于,陆山.基于静强和寿命可靠性的双辐板涡轮盘/榫结构优化设计方法[J].航空动力学报,2017,32(6):1388-1393.YOU Yu,LU Shan.Optimization design method for twin-web turbine disk/tenon structure based on static strength and life reliability[J].Journal of Aerospace Power,2017,32(6):1388-1393.(in Chinese)
    [4]
    夏新涛,孟艳艳,邱明.用灰自助泊松方法预测滚动轴承振动性能可靠性的变异过程[J].机械工程学报,2015,51(9):97-103.XIA Xintao,MENG Yanyan,QIU Ming.Forecasting for variation process of reliability of rolling bearing vibration performance using grey bootstrap Poisson method[J].Journal of Mechanical Engineering,2015,51(9):97-103.(in Chinese)
    [5]
    史修江,王黎钦,古乐,等.基于拟动力学的航空发动机主轴球轴承热弹流润滑分析[J].航空动力学报,2016,31(1):233-240.SHI Xiujiang,WANG Liqin,GU Le,et al.Thermal elastohydrodynamic lubrication analysis of aero-engine mainshaft ball bearing based on quasi-dynamic[J].Journal of Aerospace Power,2016,31(1):233-240.(in Chinese)
    [6]
    GOULD B J,BURRIS D L.Effects of wind shear on wind turbine rotor loads and planetary bearing reliability[J].Wind Energy,2016,19(6):1011-1021.
    [7]
    DESNICA E,ASONJA A,MIKIC D,et al.Reliability model of bearing assembly on an agricultural cardan shaft[J].Journal of the Balkan Tribological Association,2015,21(1):38-48.
    [8]
    ASONJA A,DESNICA E.Reliability of agriculture universal joint shafts based on temperature measuring in universal joint bearing assemblies[J].Spanish Journal of Agricultural Research,2015,13(1):1-8.
    [9]
    MIKIC D,DESNICA E,ASONJA A,et al.Reliability analysis of ball bearing on the crankshaft of piston compressors[J].Journal of the Balkan Tribological Association,2016,22(4):5060-5070.
    [10]
    夏新涛,尚艳涛,金银平,等.基于多权重法的机械产品品质实现可靠性分析[J].中国机械工程,2013,24(22):3003-3009.XIA Xintao,SHANG Yantao,JIN Yinping,et al.Quality achieving reliability analysis of mechanical product based on multi-weighted method[J].China Mechanical Engineering,2013,24(22):3003-3009.(in Chinese)
    [11]
    尚艳涛.滚动轴承质量乏信息评估方法研究[D].河南 洛阳:河南科技大学,2014.SHANG Yantao.Study on assessment methods of rolling bearing quality based on poor information[D].Luoyang Henan:Henan University of Science and Technology,2014.(in Chinese)
    [12]
    李洪兴.因素空间理论与知识表示的数学框架(Ⅰ):因素空间的公理化定义与描述架[J].北京师范大学学报(自然科学版),1996,32(4):470-475.LI Hongxing.Factor Spaces and Mathematical Frame of knowledge representation(Ⅰ):axiomatic definition of factor spaces and description frames[J].Journal of Beijing Normal University (Natural Science),1996,32(4):470-475.(in Chinese)
    [13]
    董学军,黎明,陈英武.航天器发射组织可靠性模型[J].管理工程学报,2013,27(4):75-83.DONG Xuejun,LI Ming,CHEN Yingwu.An organizational reliability model of spacecraft launch[J].Journal of Industrial Engineering and Engineering Management,2013,27(4):75-83.(in Chinese)
    [14]
    DONG Xuejun,CHEN Yingwu,LI Ming,et al.A spacecraft launch organizational reliability model based on CSF[J].Quality & Reliability Engineering International,2013,29(7):1041-1054.
    [15]
    MORDESON J N,NAIR P S.Fuzzy mathematics[M].Berlin Heidelberg:Physica-Verlag,2001.
    [16]
    NOVAK V,PERFILIEVA I,BEHOUNEK L,et al.Formal methods for fuzzy mathematics,approximation and reasoning:Part Ⅰ[J].Fuzzy Sets and Systems,2008,159(14):1727-1728.
    [17]
    NOVAK V,PERFILIEVA I,BEHOUNEK L,et al.Formal methods for fuzzy mathematics,approximation and reasoning:Part Ⅱ[J].Fuzzy Sets and Systems,2009,160(8):1003-1004.
    [18]
    夏新涛.滚动轴承乏信息试验分析与评估[M].北京:科学出版社,2007.
    [19]
    夏新涛.乏信息可靠性分析[M].北京:科学出版社,2017.
    [20]
    夏新涛,常振,叶亮,等.卫星动量灵敏性变异分析[J].航空动力学报,2017,32(3):704-713.XIA Xintao,CHANG Zhen,YE Liang,et al.Variation analysis of sensitivity for satellite momentum wheel[J].Journal of Aerospace Power,2017,32(3):704-713.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (814) PDF downloads(442) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return