| Citation: | Influence of group-hole nozzles on spray and combustion of an opposed piston opposed cylinder diesel engine[J]. Journal of Aerospace Power, 2019, 34(1): 18-26. doi: 10.13224/j.cnki.jasp.2019.01.003
|
| [1] |
FRANKE M,HUANG H,LIU J P,et al.Opposed piston opposed cylinder (OPOCTM) 450 hp engine:performance development by CAE simulations and testing［R］.SAE Technical Paper 2006-01-0277,2006.
|
| [2] |
KALKSTEIN J,RVER W,CAMPBELL B,et al.Opposed piston opposed cylinder (OPOCTM) 5/10kW heavy fuel engine for UAVs and APUs［R］.SAE Technical Paper 2006-01-0278,2006.
|
| [3] |
HOFBAUER P.Opposed piston opposed cylinder (OPOC) engine for military ground vehicles［R］.SAE Technical Paper 2005-12-1548,2005.
|
| [4] |
FLINT M,PIRAULT J P.Opposed piston engines:evolution,use,and future［M］.Detroit,US:SAE,2009:456-458.
|
| [5] |
谢钊毅.对置活塞二冲程柴油机喷雾过程的试验研究与数值模拟［D］.北京:北京理工大学,2016.XIE Zhaoyi.Experimental study and numerical simulation of the spray process in an opposed-piston two-stroke diesel engine［D］.Beijing:Beijing Institute of Technology,2016.(in Chinese)
|
| [6] |
强永平,李耀宗,白洪林,等.组合喷射对双对置二冲程发动机燃烧过程影响的计算研究［J］.车用发动机,2014(5):46-53.QIANG Yongping,LI Yaozong,BAI Honglin,et al.Influence of combined injection on OPOC two-stroke engine combustion［J］.Vehicle Engine,2014(5):46-53.(in Chinese)
|
| [7] |
杨峰.双对置柴油机侧向组合喷雾-燃烧过程的数值模拟研究［D］.长沙:湖南大学,2016.YANG Feng.Numerical simulation on lateral combined spray and combustion of dual opposed diesel engine［D］.Changsha:Hunan University,2016.(in Chinese)
|
| [8] |
刘军萍.高功率密度OPOC柴油机喷雾燃烧过程与喷油策略研究［D］.太原:中北大学,2013.LIU Junping.Research on spray-combustion process and injection methods of high power density diesel engine［D］.Taiyuan:North University of China,2013.(in Chinese)
|
| [9] |
BERGSTRAND P,FRSTH M,DENBRATT I.The influence of orifice diameter on flame lift-off length［R］.Zaragoza,Spain：ILSS-Europe Annual Conference,2002.
|
| [10] |
NISHIDA K,ZHANG W,MANABE T.Effects of micro-hole and ultra-high injection pressure on mixture properties of DI diesel spray［R］.SAE Technical Paper 2007-01-1890,2007.
|
| [11] |
张扬,谢侃,岳明辉,等.流体喉部横流喷嘴的雾化特性［J］.航空动力学报,2017,32(5):1074-1081.ZHANG Yang,XIE Kan,YUE Minghui,et al.Atomization characteristics of cross-flow injector in the fluidic nozzle throat［J］.Journal of Aerospace Power,2017,32(5):1074-1081.(in Chinese)
|
| [12] |
ZHANG Y,NISHIDA K,NOMURA S,et al.Spray characteristics of a group-hole nozzle for direct-injection diesel engines［J］.Atomization and Sprays,2006,16(1):35-50.
|
| [13] |
KIM S,NAMBA M,SHIMO D,et al.Numerical analysis of the mechanism in diesel mixture formation and emission reduction by group hole nozzle［C］∥The 20th Internal Combustion Engine Symposium.Tokyo:The Japan Society of Mechanical Engineers,2009:1-3.
|
| [14] |
PARK S,REITZ R D,KIM J.Combustion and emission characteristics of converging group-hole nozzle under lean engine operating conditions［J］.Fuel,2011,90(11):3259-3267.
|
| [15] |
KIM J,PARK S W,ANDRIE M,et al.Experimental investigation of intake condition and group-hole nozzle effects on fuel economy and combustion noise for stoichiometric diesel combustion in an HSDI diesel engine［J］.SAE International Journal of Engines,2009,2(1):1054-1067.
|
| [16] |
齐文亮,明平剑,张文平,等.不同液滴破碎模型的验证及柴油机在燃气混合过程中的应用［J］.航空动力学报,2018,33(9):2093-2100.QING Wenliang,MING Pingjian,ZHANG Wenping,et al.Evaluation of different breakup models and application to the mixture preparation process for diesel［J］.Journal of Aerospace Power,2018,33(9):2093-2100.(in Chinese)
|
| [17] |
JIAN G,MATSUMOTO Y,NISHIDA K.Effects of group-hole nozzle specifications on fuel atomization and evaporation of direct injection diesel sprays［R］.SAE Technical Paper 2007-01-1889,2007.
|
| [18] |
MOON S,MATSUMOTO Y,NISHIDA K,et al.Improving diesel mixture preparation by optimization of orifice arrangements in a group-hole nozzle［J］.International Journal of Engine Research,2010,11(2):109-126.
|
DownLoad: