Volume 34 Issue 1
Jan.  2019
Turn off MathJax
Article Contents
Experiment on spray characteristics of air-assisted injection under flash boiling conditions[J]. Journal of Aerospace Power, 2019, 34(1): 63-72. doi: 10.13224/j.cnki.jasp.2019.01.008
Citation: Experiment on spray characteristics of air-assisted injection under flash boiling conditions[J]. Journal of Aerospace Power, 2019, 34(1): 63-72. doi: 10.13224/j.cnki.jasp.2019.01.008

Experiment on spray characteristics of air-assisted injection under flash boiling conditions

doi: 10.13224/j.cnki.jasp.2019.01.008
  • Received Date: 2018-03-14
  • Publish Date: 2019-01-28
  • The effects of ambient pressure and fuel temperature on spray characteristics of air-assisted injection system were investigated by using high-speed photography and phase Doppler particle analyzer (PDPA) in a constant volume chamber. The ambient pressure ranged from 0.01MPa to 0.1MPa, and the fuel temperature ranged from 25℃ to 100℃ during the experiment. The experimental results showed that spray condition transferred from the non-flash boiling to flash boiling gradually with the decrease of the ambient pressure that induced the intensified bubble bursting at the nozzle exit. When the ambient pressure was less than 0.02MPa, the spray was in flash boiling condition, bringing about the increase of the droplet velocity, the decrease of the droplet diameter and the spray expansion in the near field. Meanwhile, the rising fuel temperature led to the decrease of the fuel surface tension, which can accelerate the break of the droplet. As the fuel temperature reached 100℃, when the spray was in flash boiling condition, the spray expansion occurred in the far field.

     

  • loading
  • [1]
    魏民祥,刘锐,杨海青,等.二冲程点燃式直喷重油发动机小负荷试验[J].航空动力学报,2017,32(12):2919-2926.WEI Minxiang,LIU Rui,YANG Haiqing,et al.Partical load tests on a two-stroke spark ignition direct injection heavy fuel engine[J].Journal of Aerospace Power,2017,32(12):2919-2926.(in Chinese)
    [2]
    NAJJAR Y S H.Comparison of performance of a Greener direct-injection stratified-charge (DISC) engine with a spark-ignition engine using a simplified model[J].Energy,2011,36(7):4136-4143.
    [3]
    李雁飞,郭恒杰,王建昕,等.高背压下GDI油束喷雾特性的试验[J].内燃机学报,2016,34(4):326-333.LI Yanfei,GUO Hengjie,WANG Jianxin,et al.Experiment on spray characteristics of GDI jet under elevated ambient pressure[J].Transactions of CSICE,2016,34(4):326-333.(in Chinese)
    [4]
    李明,徐斌,许敏,等.外开环直喷喷油器在不同燃油过热度下的喷雾特性研究[J].内燃机工程,2014,35(5):88-94.LI Ming,XU Bin,XU Min,et al.Spray characteristics of outward-opening nozzle for DISI engine in different fuel superheat degree conditions[J].Chinese Internal Combustion Engine Engineering,2014,35(5):88-94.(in Chinese)
    [5]
    SURESHKUMAR J,ELAYARAJA R,MALLIKARJUNA J M,et al.Transient spray characteristics of air assisted fuel injection[R].SAE Paper 2015-01-0920,2015.
    [6]
    BORETTI A A,JIN S H,ZAKIS G,et al.Experimental and numerical study of an air assisted fuel injector for a D.I.S.I.engine[R].SAE Paper 2007-01-1415,2007.
    [7]
    白洪林,胡春明,李志军,等.空气喷射量对空气辅助喷射喷雾特性的影响[J].天津大学学报(自然科学与工程技术版),2016,49(2):206-212.BAI Honglin,HU Chunming,LI Zhijun,et al.Effect of air injection quantity on spray characteristics of an air-assisted direct injector[J].Journal of Tianjin University (Science and Technology),2016,49(2):206-212.(in Chinese)
    [8]
    LI Y,ZHAO H,BROUZOS N,et al.Effect of injection timing on mixture and CAI combustion in a GDI engine with an air-assisted injector[R].SAE Technical Paper 2006-01-0206,2006.
    [9]
    王永伟,魏民祥,杨海青,等.空气辅助缸内直喷发动机正时控制策略[J].航空动力学报,2014,29(12):2942-2947.WANG Yongwei,WEI Minxiang,YANG Haiqing,et al.Timing control strategies of air-assisted direct injection engine[J].Journal of Aerospace Power,2014,29(12):2942-2947.(in Chinese)
    [10]
    LI Y,GUO H,MA X,et al.Morphology analysis on multi-jet flash-boiling sprays under wide ambient pressures[J].Fuel,2018,211:38-47.
    [11]
    KAWANO D,GOTO Y,ODAKA M,et al.Modeling atomization and vaporization processes of flash-boiling spray[R].SAE Paper 2004-01-0534,2004.
    [12]
    ZENG W,XU M,ZHANG G,et al.Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels[J].Fuel,2012,95:287-297.
    [13]
    SHER E,BAR-KOHANY T,RASHKOVAN A.Flash-boiling atomization[J].Progress in Energy and Combustion Science,2008,34(4):417-439.
    [14]
    ZENG W,XU M,ZHANG M,et al.Macroscopic characteristics for direct-injection multi-hole sprays using dimensionless analysis[J].Experimental Thermal and Fluid Science,2012,40(7):81-92.
    [15]
    XU M,ZHANG Y,ZENG W,et al.Flash boiling:easy and better way to generate ideal sprays than the high injection pressure[J].SAE International Journal of Fuels and Lubricants,2013,6(1):137-148.
    [16]
    SENDA J,WADA Y,KAWANO D,et al.Improvement of combustion and emissions in diesel engines by means of enhanced mixture formation based on flash boiling of mixed fuel[J].International Journal of Engine Research,2008,9(1):15-27.
    [17]
    张铭,许敏.直喷喷雾-环境气体两相流场的实验研究[J].工程热物理学报,2015,36(1):205-209.ZHANG Ming,XU Min.Experimental study on GDI fuel spray-ambient gas two-phase flow[J].Journal of Engineering Thermophysics,2015,36(1):205-209.(in Chinese)
    [18]
    ZHANG G,XU M,ZHANG Y,et al.Macroscopic characterization of flash-boiling multihole sprays using planar laser-induced exciplex fluorescence:Part Ⅱ cross-sectional spray structure[J].Atomization and Sprays,2012,22(10):861-878.
    [19]
    SCHMITZ I,IPP W,LEIPERTZ A.Flash boiling effects on the development of gasoline direct-injection engine sprays[R].SAE Paper 2002-01-2661,2002.
    [20]
    LI Y,GUO H,FEI S,et al.An exploration on collapse mechanism of multi-jet flash-boiling sprays[J].Applied Thermal Engineering,2018,134:20-28.
    [21]
    ZHANG M,XU M,HUNG D L S.Simultaneous two-phase flow measurement of spray mixing process by means of high-speed two-color PIV[J].Measurement Science and Technology,2014,25(9):095204.1-095204.9.
    [22]
    佘金平,张煜盛,张辉亚,等.燃油温度对喷雾特性的影响研究[J].内燃机工程,2011,32(5):37-43.SHE Jinping,ZHANG Yusheng,ZHANG Huiya,et al.Effects of fuel temperature on spray characteristics[J].Chinese Internal Combustion Engine Engineering,2011,32(5):37-43.(in Chinese)
    [23]
    MOJTABI M,WIGLEY G,HELIE J.The effect of flash boiling on the atomization performance of gasoline direct injection multistream injectors[J].Atomization and Sprays,2014,24(6):467-493.
    [24]
    AORI G,HUNG D L S,ZHANG M,et al.Effect of nozzle configuration on macroscopic spray characteristics of multi-hole fuel injectors under superheated conditions[J].Atomization and Sprays,2016,26(5):439-462.
    [25]
    GUO H,DING H,LI Y,et al.Comparison of spray collapses at elevated ambient pressure and flash boiling conditions using multi-hole gasoline direct injector[J].Fuel,2017,199:125-134.
    [26]
    HUANG Y,HUANG S,HUANG R,et al.Spray and evaporation characteristics of ethanol and gasoline direct injection in non-evaporating,transition and flash-boiling conditions[J].Energy Conversion and Management,2016,108:68-77.
    [27]
    宋志平,王天友,杨晟华,等.汽油直喷闪急沸腾喷雾特性的试验[J].内燃机学报,2013,31(5):420-424.SONG Zhiping,WANG Tianyou,YANG Shenghua,et al.Experiment of flash boiling spray characteristics based on GDI multi-hole injector[J].Transactions of CSICE,2013,31(5):420-424.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1112) PDF downloads(844) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return