| Citation: | ptimization research of the exhaust height on aviation pistontwo-stroke gasoline engine[J]. Journal of Aerospace Power, 2019, 34(2): 442-450. doi: 10.13224/j.cnki.jasp.2019.02.020 |
| [1] |
廉筱纯,吴虎.航空发动机原理[M].西安:西北工业大学出版社,2005.
|
| [2] |
陈黎.军用无人机技术的发展现状及未来趋势[J].航空科学技术,2013,11(2):11-14.CHEN Li.Development and trend of military UAV technology[J].Aeronautical Science Fund,2013,11(2):11-14.(in Chinese)
|
| [3] |
王兴海,马震,郑勇.无人机用小型航空活塞发动机的发展[R].西安:2006中国无人机大会,2006:523-527.
|
| [4] |
来海菊.小型二冲程汽油机扫气过程的模拟与改进[D].江苏 镇江:江苏大学,2007.LAI Haiju.Simulation andimprovement of scavenging process of small two-stroke gasoline engine[D].Zhenjiang Jiangsu:Jiangsu University,2007.(in Chinese)
|
| [5] |
贾倩倩.小型航空二冲程直喷汽油活塞发动机燃油喷射及燃烧特性的研究[D].北京:北京交通大学,2014.JIA Qianqian.Study on thefule injection and combustion property of light-wight,two-stroke,GDI aeroengine[D].Beijing:Beijing Jiaotong University,2014.(in Chinese)
|
| [6] |
本森 R S,徐礼云.二冲程回流和横流扫气发动机换气过程的新型气体动力模型[J].国外舰船技术(内燃机类),1979,10(8):23-39.
|
| [7] |
丁秋明,苏小平,缪小冬,等.某二冲程汽油机气口关键参数的优化[J].中国农机化学报,2015,36(1):210-214.DING Qiuming,SU Xiaoping,MIAO Xiaodong,et al.Optimization of the key parameters of a two-stroke gasoline engine air intakes[J].Journal of Chinese Agricultural Mechanization,2015,36(1):210-214.(in Chinese)
|
| [8] |
李清砺,唐立春,李帅.排气和扫气相位对小型二冲程汽油机排放等性能的影响[J].内燃机与配件,2015,18(6):1-4.LI Qingli,TANG Lichun,LI Shuai.Effects of exhaust opening time and transfer opening time to small two-stroke gasoline engine emissions and other parameters[J].Internal Combustion Engine and Accessories,2015,18(6):1-4.(in Chinese)
|
| [9] |
杨立青,张兆亮,秦静.小型二冲程汽油机短路损失的数值可视化模拟[J].内燃机与配件,2016,10(10):8-13.YANG Liqing,ZHANG Zhaoliang,QIN Jing.Numericalvisualization of air short-circuiting in a small two-stroke SI engine[J].Internal Combustion Engine and Accessories,2016,10(10):8-13.(in Chinese)
|
| [10] |
陆军,沈辉,涂强,等.二冲程汽油机扫气过程的CFD数值模拟与试验研究[J].农业装备技术,2017,43(1):18-22.LU Jun,SHEN Hui,TU Qiang.CFD numerical simulation and experimental study on gas purge process of two-stroke gasoline enginep[J].Agricultural Equipment Technology,2017,43(1):18-22.(in Chinese)
|
| [11] |
陈欠根,张祥剑,潘钟键,等.二冲程柴油航空发动机混和扫气数值仿真[J].科技导报,2014,32(22):23-28.CHEN Qiangen,ZHANG Xiangjian,PAN ZHongjian.Numerical simulation of mixed scavenging methods for two-stroke diesel aero engines[J].Technology Review,2014,32(22):23-28.(in Chinese)
|
| [12] |
MUGELE M,TRIBULOWSKI J,PETERS H,et al.Numerical analysis of gas exchange and combustion process in a small two-stroke gasoline engine[J].Cardiology,2001,115(4):274-274.
|
| [13] |
曹源,金先龙,孟光.航空发动机系统级仿真研究的回顾与展望[J].航空动力学报,2004,19(4):562-571.CAO Yuan,JIN Xianlong,MENG Guang.Retrospect and prospect of aeroengine system level simulation research[J].Journal of Aerospace Power,2004,19(4):562-571.(in Chinese)
|
| [14] |
蔡晓林.FAI二冲程缸内直喷汽油机的研究[D].天津:天津大学,2005.CAI Xiaolin.Study on FAI injection two-stroke DISI engine[D].Tianjin:Tianjin University,2005.(in Chinese)
|
| [15] |
胡春明,郝蒙蒙.无人机活塞式发动机进排气系统优化[J].航空动力学报,2018,33(4):1009-1016.HU Chunming,HAO Mengmeng.Optimization of intake and exhaust systems for unmanned piston engines[J].Journal of Aerospace Power,2018,33(4):1009-1016.(in Chinese)
|
| [16] |
蔡娟.某小型航空煤油活塞发动机总体性能分析及优化[D].南京:南京航空航天大学,2015.CAI Juan.Analysis andoptimization on the overall performance of small aviation kerosene piston engine[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2015.(in Chinese)
|
| [17] |
蒋炎坤,钟毅芳,罗马吉,等.二冲程发动机扫排气道-缸内系统三维瞬态数值模拟研究[J].内燃机学报,2001,19(2):159-164.JIANG Yankun,ZHONG Yifang,LUO Maji,et al.Three-dimensional transient numerical simulation in the scavening syatem and the cylinder for two-stroke engine[J].Transactions of CSICE,2001,19(2):159-164.(in Chinese)
|
| [18] |
BLAIR G P,KENNY R G,SMYTH J G,et al.An experimental comparison of loop and cross scavenging of the two-stroke cycle engine[R].Washington:Slurry Transport Association,1986.
|
| [19] |
林海英,龙向阳.某型增压航空活塞发动机仿真研究[J].航空动力学报,2009,24(6):1332-1338.LIN Haiying,LONG Xiangyang.Simulation research on a type of turbocharged piston engine[J].Journal of Aerospace Power,2009,24(6):1332-1338.(in Chinese)
|
| [20] |
朱成,杨海青,汪明生.基于CFD分析的二冲程发动机直喷燃烧室方案设[J].航空动力学报,2013,28(12):2737-2745.ZHU Cheng,YANG Haiqing,WANG Mingsheng.Design of combustion chamber program of two-stroke ditrect injection spark ignition engine based on the CFD[J].Journal of Aerospace Power,2013,28(12):2737-2745.(in Chinese)
|
| [21] |
CUNNINGHAM G,KEE R J,BOYALL J.CFD prediction of crankcase flow regimes in a crankcase scavenged two-stroke engine[R].Boston:International Congress and Exposition,1997.
|
| [22] |
陈林林,魏民祥,杨海青.航空二冲程汽油发动机均值模型的试验与仿真[J].航空动力学报,2008,23(12):2249-2255.CHEN Linlin,WEI Minxiang,YANG Haiqing.Experment and simulation of the mean value model on two-stroke gasonline aero-engine[J].Journal of Aerospace Power,2008,23(12):2249-2255.(in Chinese)
|
| [23] |
杜涛.CFD模拟分析在二冲程汽油机性能改进中的应用探讨[J].内燃机与动力装置,2010(3):30-32,36.DU Tao.CFD simulation analysis on two-stroke gasoline engine improvement[J].Internal Combustion Engine and Powerplant,2010(3):30-32,36.(in Chinese)
|
| [24] |
王广基,郭晨海,姜树李,等.二冲程汽油机扫气过程的CFD模拟计算与试验[J].小型内燃机与车辆技术,2008,37(2):29-32.WANG Guangji,GUO Chenhai,JIANG Shuli,et al.Simulation by CFD and experimentation for a loop-scavenged two-stroke engine[J].Small Nternal Combustion Engine and Motorcycle,2008,37(2):29-32.(in Chinese)
|