| Citation: | Stress rupture properties and fracture behavior of thin wall specimens of DD6 single crystal superalloy with ［001］ direction[J]. Journal of Aerospace Power, 2019, 34(3): 627-634. doi: 10.13224/j.cnki.jasp.2019.03.014
|
| [1] |
周杨,朱春雷.铸件薄壁尺寸效应的研究成果［J］.大型铸锻件,2011(3):44-47.ZHOU Yang,ZHU Chunlei.casting size effect research achievements［J］.Heavy Casting and Forging,2011,3:44-47.(in Chinese)
|
| [2] |
SEETHARAMAN V,CETEL A D.Thickness debit in creep properties of PWA 1484［R］.Pennsylvanis:the Minerals,Metals and Materials Society,2004.
|
| [3] |
DONER M,HECKLER J A.Identification of mechanisms responsible for degradation for degradation in thin-wall stress-rupture properties［R］.Pennsylvanis:the Minerals,Metals and Materials Society,1988.
|
| [4] |
刘维维,李影,刘世忠,等.［011］取向DD6单晶高温合金薄壁持久性能［J］.材料工程,2011(8):24-27.LIU Weiwei,LI Ying,LIU Shizhong,et al.Thin-wall stress rupture properties of single crystal superalloy DD6 with［011］ orientation［J］.Journal of Materials Engineering,2011(8):24-27.(in Chinese)
|
| [5] |
张强,黄朝晖,仝建民.一种定向凝固高温合金的薄壁效应研究［J］.特种铸造及有色金属,2005,25(5):260-261.ZHANG Qiang,HUANG Zhaohui,TONG Jianmin.Thin-wall effect of a directional solidification nickel-based superalloy［J］.Special Casting and Nonferrous Alloys,2005,25(5):260-261.(in Chinese)
|
| [6] |
余昌奎,于金江,仉凤江,等.DD499单晶合金持久性能薄壁效应［J］.铸造,2014,63(5):479-483.YU Changkui,YU Jinjiang,ZHANG Fengjiang,et al.Influence of thin wall on the stress rupture properties of DD499single crystal superalloy［J］.Founndry,2014,63(5):479-483.(in Chinese)
|
| [7] |
刘世忠,李嘉荣,李骋,等.第二代单晶高温合金DD6的薄壁持久性能［J］.钢铁研究学报,2003,15(7):276-278.LIU Shizhong,LI Jiarong,LI Cheng,et al.Stress-rupture property of thin-wall specimen for single crystal superalloy DD6［J］.Journal of Iron and Steel Research,2003,15(7):276-278.(in Chinese)
|
| [8] |
艾兴,高行山,温志勋,等.DD6镍基单晶合金气膜孔薄壁平板高温蠕变性能［J］.航空动力学报,2014,29(5):1197-1204.AI Xing,GAO Xingshan,WEN Zhixun,et al.Creep behavior of thin-wall plate with cooling holes of nickel-based single crystal superalloy DD6 under high temperature［J］.Journal of Aerospace Power,2014,29(5):1197-1204.(in Chinese)
|
| [9] |
刘丽荣,金涛,赵乃仁,等.一种Ni基单晶高温合金［001］方向的持久性能与断裂行为［J］.金属学报,2004,40(8):858-862.LIU Lirong,JIN Tao,ZHAO Nairen,et al.Stress rupture properties and fracture behavior of a Ni base single crystal superalloy along［001］ direction［J］.Acta Metallurgica Sinica,2004,40(8):858-862.(in Chinese)
|
| [10] |
ZHANG Bing,LU Xin,LIU Delin,et al.Influence of recrystallization on high-temperature stress rupture and fracture behavior of single crystal superalloy［J］.Materials Science and Engineering:A,2012,551:149-153.
|
| [11] |
水丽,金涛,胡壮麒.［011］取向镍基单晶合金蠕变特征［J］.金属学报,2009,45(11):1349-1355.SHUI Li,JIN Tao,HU Zhuangqi.Creep characteristics of a Ni base single crystal superalloy with［011］ orientation［J］.Acta Metallurgica Sinica,2009,45(11):1349-1355.(in Chinese)
|
| [12] |
于莉丽,田素贵,于慧臣,等.［110］取向DD3镍基单晶合金的组织结构及蠕变行为［J］.材料工程,2009(增刊2):40-51.YU Lili,TIAN Sugui,YU Huichen,et al.Microstructure and creep behavior of DD3 single crystal nickel-base superalloy with ［110］ orientation［J］.Journal of Materials Engineering,2009(Suppl.2):40-51.(in Chinese)
|
| [13] |
SUN Weikang,XU Yuanming,HU Chunyan,et al.Effect of film-hole configuration on creep rupture behavior of a second generation nickel-based single crystal superalloys［J］.Materials Characterization,2017,130:298-310.
|
| [14] |
邓瑛,孙瑞杰,谢建文,等.定向凝固涡轮叶片不同部位材料持久强度差异［J］.航空动力学报,2012,27(1):104-109.DENG Ying,SUN Ruijie,XIE Jianwen,et al.Creep property variation at different regions on a directionally solidified turbine blade［J］.Journal of Aerospace Power,2012,27(1):104-109.(in Chinese)
|
| [15] |
岳珠峰,吕震宙,杨治国,等.晶体取向的偏差和随机性对镍基单晶叶片强度与蠕变寿命的影响［J］.航空动力学报,2003,18(4):477-480.YUE Zhufeng,L Zhenzhou,YANG Zhiguo,et al.Influence of deviation and randomness of crystallographic orientations on the strength and life of nickel-base single crystal superalloy turbine blades［J］.Journal of Aerospace Power,2003,18(4):477-480.(in Chinese)
|
| [16] |
HU Yebing,ZHANG Li,CAO Tieshan,et al.The effect of thickness on the creep properties of a single-crystal nickelbased superalloy［J］.Materials Science and Engineering:A,2018,728:124-132.
|
| [17] |
HU Yebing,CHENG Congqian,ZHANG Li,et al.Microstructural evolution of oxidation film on a single crystal nickel-based superalloy at 980℃［J］.Oxidation of Metals,2018,89:303-317.
|
| [18] |
《航空发动机设计用材料数据手册》编委会.航空发动机设计用材料数据手册［M］.北京,航空工业出版社,2010.
|
DownLoad: