| Citation: | Numerical modelling of elastic ring squeeze film damper based on thick plate and force coefficient identification[J]. Journal of Aerospace Power, 2019, 34(3): 635-642. doi: 10.13224/j.cnki.jasp.2019.03.015 |
| [1] |
COOPER S.Preliminary investigation of oil films for the control of vibration[J].Lubrication and Wear Convention,1963,28:305-315.
|
| [2] |
ZHAO J Y,HAHN E J.Subharmonic,quasi-periodic and chaotic motions of a rigid rotor supported by an eccentric squeeze film damper[J].Journal of Mechanical Engineering Science,1993,207(6):383-392.
|
| [3] |
GJIKA K,GROVES C,ANDRS L S,et al.Nonlinear dynamic behavior of turbocharger rotor-bearing systems with hydrodynamic oil film and squeeze film damper in series:prediction and experiment[J].Journal of Computational & Nonlinear Dynamics,2010,5(4):2040-2049.
|
| [4] |
江龙平,徐可君,唐有才,等.几种新型航空用挤压油膜阻尼器[J].航空科学技术,2000(6):32-33.JIANG Longping,XU Kejun,TANG Youchai,et al.Several new squeeze film daper used in aeroengine[J].Acronantical Science and Techology,2000(6):32-33.(in Chinese)
|
| [5] |
马艳红,王虹,洪杰.带金属橡胶油膜环的自适应挤压油膜阻尼器非协调响应研究[J].航空动力学报,2009,24(2):390-395.MA Yanhong,WANG Hong,HONG Jie.Investigation of non-synchronous responce of adaptive squeeze film damper with metal rubber oil film[J].Journal of Aerospace Power,2009,24(2):390-395.(in Chinese)
|
| [6] |
ZEIDAN F Y,ANDRES L S,VANCE J M,et al.Design and application of squeeze film dampers in rotating machinery[C]∥Proceedings of the Twenty-fifth Turbomachinery Symposium.Texas,USA:Texas A&M University Turbomachinery Laboratories,1996:169-188.
|
| [7] |
周明,李其汉,晏砺堂.弹性环式挤压油膜阻尼器减振机理研究(1):弹性环式挤压油膜阻尼器减振机理模型[J].燃气涡轮试验与研究,1998,11(4):19-23.
|
| [8] |
周明,李其汉,晏砺堂.弹性环式挤压油膜阻尼器减振机理研究(2):弹性环式挤压油膜阻尼器油膜力特性的求解[J].燃气涡轮试验与研究,1999,12(1):30-33.
|
| [9] |
曹磊,高德平,江和甫.弹性环式挤压油膜阻尼器设计因素研究[J].燃气涡轮试验与研究,2006,14(4):30-34.CAO Lei,GAO Deping,JIANG Hefu.Investigation on design factor of elastic ring squeeze film damper[J].Gas Turbine Experiment and Research,2006,14(4):30-34.(in Chinese)
|
| [10] |
周明,李其汉,晏砺堂.弹性环式挤压油膜阻尼器实验研究与应用[J].航空动力学报,1998,13(4):59-63.ZHOU Ming,LI Qihan,YAN Litang.Experimental investigation and application of an elastic ring squeeze film damper[J].Journal of Aerospace Power,1998,13(4):59-63.(in Chinese)
|
| [11] |
XU Y,CHEN X,ZOU J,et al.Influence of orifice distribution on the characteristics of elastic ring-squeeze film dampers for flywheel energy-storage system[J].IEEE Transactions on Plasma Science,2013,41(5):1272-1279.
|
| [12] |
ZHANG W,DING Q.Elastic ring deformation and pedestal contact status analysis of elastic ring squeeze film damper[J].Journal of Sound and Vibration,2015,346(1):314-327.
|
| [13] |
REISSNER E.The effect of transverse shear deformation on the bending of elastic plates[J].Journal of Applied Mechanics.1945,12(3):69-77.
|
| [14] |
MINDLIN R D.Influence of rotary inertia and shear on flexural motions of isotropic,elastic plates[J].Journal of Applied Mechanics,1951,18(1):31-38.
|
| [15] |
PETYT M.Introduction to finite element vibration analysis[M].Cambridge:Cambridge University Press,2010:209-215.
|
| [16] |
GREENWOOD J A,WILLIAMSON J P.Contact of nominally flat surfaces[J].Proceedings of the Royal Society A,1966,295(1442):300-319.
|
| [17] |
POPOV V L.Contact mechanics and friction[M].Berlin:Springer,2010.
|