| Citation: | Effect of cage slipping on fault characteristic frequencies of aeroengine main-shaft bearings[J]. Journal of Aerospace Power, 2019, 34(5): 1145-1152. doi: 10.13224/j.cnki.jasp.2019.05.021
|
| [1] |
TAUQIR A,SALAM I,HAQ A U,et al.Causes of fatigue failure in the main bearing of an aero-engine［J］.Engineering Failure Analysis,2000,7(2):127-144.
|
| [2] |
焦育洁,周志澜.航空发动机主轴轴承失效分析［J］.轴承,1998(6):6-11.JIAO Yujie,ZHOU Zhilan.Failure analysis on aero-engine spindle bearing［J］.Bearing,1998(6):6-11.(in Chinese)
|
| [3] |
陈光.航空发动机轴承的滑蹭损伤与防止措施［J］.燃气涡轮试验与研究,2004,17(3):58-62.CHEN Guang.Aero-engine bearing’s skidding damage and preventive measures［J］.Gas Turbine Experiment and Research,2004,17(3):58-62.(in Chinese)
|
| [4] |
崔立,王黎钦,郑德志,等.航空发动机高速滚子轴承动态特性分析［J］.航空学报,2008,29(2):492-498.CUI Li,WANG Liqin,ZHENG Dezhi,et al.Analysis on dynamic characteristics of aero-engine high-speed roller bearings［J］.Acta Aeronautica et Astronautica Sinica,2008,29(2):492-498.(in Chinese)
|
| [5] |
刘秀海.高速滚动轴承动力学分析模型与保持架动态性能研究［D］.辽宁 大连:大连理工大学,2011.LIU Xiuhai.Dynamies analysis model of high-speed rolling bearing and dynamic performance of cages［D］.Dalian Liaoning:Dalian University of Technology,2011.(in Chinese)
|
| [6] |
HARRIS T A.An analytical method to predict skidding in high speed roller bearings［J］.Tribology Transactions,1966,9(3):229-241.
|
| [7] |
TU W,SHAO Y.An analytical model to investigate skidding in rolling element bearings during acceleration［J］.Journal of Mechanical Science and Technology,2012,26(8):2451-2458.
|
| [8] |
NIU L,CAO H,HE Z,et al.An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations［J］.Tribology International,2016,103:12-24.
|
| [9] |
CAO H,NIU L,XI S,et al.Mechanical model development of rolling bearing-rotor systems:a review［J］.Mechanical Systems and Signal Processing,2018,102:37-58.
|
| [10] |
韩勤锴,李兴林,闫国斌,等.变载偏斜圆柱滚子轴承打滑动力学分析［J］.机械工程学报,2017,53(9):58-65.HAN Qinkai,LI Xinglin,YAN Guobin,et al.Dynamic skidding behavior of skew cylindrical roller bearings under time-variable loads［J］.Journal of Mechanical Engineering,2017,53(9):58-65.(in Chinese)
|
| [11] |
涂文兵.滚动轴承打滑动力学模型及振动噪声特征研究［D］.重庆:重庆大学,2012.TU Wenbing.Skidding dynamic model of rolling element bearing and features of vibration and noise［D］.Chongqing:Chongqing University,2012.(in Chinese)
|
| [12] |
丁洪福,景敏卿,王风涛,等.加速工况下高速圆柱滚子轴承打滑分析［J］.机械设计与制造,2016(2):64-67.DING Hongfu,JING Minqing,WANG Fengtao,et al.Skidding analysis of high speed cylindrical roller bearing considering acceleration of bearing［J］.Machinery Design and Manufacture,2016(2):64-67.(in Chinese)
|
| [13] |
金海善,朱爱斌,陈渭.利用改进牛顿-拉夫逊法的高速圆柱滚子轴承打滑分析［J］.西安交通大学学报,2015,49(1):133-138.JIN Haishan,ZHU Aibin,CHEN Wei.Skidding analysis of high-speed cylindrical roller bearings using improved Newton-Raphson method［J］.Journal of Xi’an Jiaotong University,2015,49(1):133-138.(in Chinese)
|
| [14] |
刘红彬,张帅,邢国玺,等.圆柱滚子轴承滚子打滑机理研究［J］.轴承,2014(3):1-6.LIU Hongbin,ZHANG Shuai,XIN Guoxi.Study on skidding mechanism for rollers of cylindrical roller bearings［J］.Bearing,2014(3):1-6.(in Chinese)
|
| [15] |
贾永川,邓四二.圆柱滚子轴承启动阶段滚动体打滑特性分析［J］.机械传动,2015,39(12):133-137.JIA Yongchuan,DENG Sier.Analysis of slippage characteristic of roller in cylindrical roller bearing during the start-up［J］.Journal of Mechanical Transmission,2015,39(12):133-137.(in Chinese)
|
| [16] |
崔立,王黎钦,郑德志,等.高速球轴承打滑的临界负荷研究［J］.航空动力学报,2007,22(11):1971-1976.CUI Li,WANG Liqin,ZHENG Dezhi,et al.Study on critical load of skidding in high speed ball bearing［J］.Journal of Aerospace Power,2007,22(11):1971-1976.(in Chinese)
|
| [17] |
邓四二,顾金芳,崔永存,等.高速圆柱滚子轴承保持架动力学特性分析［J］.航空动力学报,2014,29(1):207-215.DENG Sier,GU Jinfang,CUI Yongcun,et al.Analysis on dynamic characteristics of cage in high-speed cylindrical roller bearing［J］.Journal of Aerospace Power,2014,29(1):207-215.(in Chinese)
|
| [18] |
NIU L,CAO H,HE Z,et al.A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects［J］.Journal of Sound and Vibration,2015,357:207-232.
|
| [19] |
CAO H,NIU L,HE Z,et al.Dynamic modeling and vibration response simulation for high speed rolling ball bearings with localized surface defects in raceways［J］.Journal of Manufacturing Science and Engineering,2014,136(4):152-161.
|
| [20] |
牛蔺楷,曹宏瑞,何正嘉.滚动球轴承损伤故障动力学建模与仿真［J］.中国科技论文,2014,9(8):902-907.NIU Linkai,CAO Hongrui,HE Zhengjia.Dynamic modeling and simulation of rolling ball bearings with localized surface defects［J］.China Sciencepaper,2014,9(8):902-907.(in Chinese)
|
| [21] |
牛蔺楷,曹宏瑞,何正嘉.具有局部表面损伤的滚动球轴承动力学建模［J］.振动.测试与诊断,2014,34(2):356-360.NIU Linkai,CAO Hongrui,HE Zhengjia.Dynamic modeling on localized defect of rolling ball bearings［J］.Journal of Vibration,Measurement and Diagnosis,2014,34(2):356-360.(in Chinese)
|
| [22] |
牛蔺楷,曹宏瑞,何正嘉.考虑三维运动和相对滑动的滚动球轴承局部表面损伤动力学建模研究［J］.机械工程学报,2015,51(19):53-59.NIU Linkai,CAO Hongrui,HE Zhengjia.Dynamic modeling of rolling ball bearing with localized surface defects considering three dimensional motions and relative slippage［J］.Journal of Mechanical Engineering,2015,51(19):53-59.(in Chinese)
|
| [23] |
ANTONI J,RANDALL R B.A Stochastic model for simulation and diagnostics of rolling element bearings with localized faults［J］.Journal of Vibration and Acoustics,2003,125(3):282-289.
|
| [24] |
SAWALHI N,RANDALL R B.The combined gear bearing dynamic model and the simulation of localised bearing faults［J］.Mechanical Systems and Signal Processing,2008,22(8):1924-1951.
|
DownLoad: