Volume 34 Issue 6
Jun.  2019
Turn off MathJax
Article Contents
Stiffness characteristics of flange joint with a snap and its influence on structure vibration[J]. Journal of Aerospace Power, 2019, 34(6): 1201-1208. doi: 10.13224/j.cnki.jasp.2019.06.003
Citation: Stiffness characteristics of flange joint with a snap and its influence on structure vibration[J]. Journal of Aerospace Power, 2019, 34(6): 1201-1208. doi: 10.13224/j.cnki.jasp.2019.06.003

Stiffness characteristics of flange joint with a snap and its influence on structure vibration

doi: 10.13224/j.cnki.jasp.2019.06.003
  • Received Date: 2018-11-21
  • Publish Date: 2019-06-28
  • The stiffness characteristics of flange joint with a snap were studied by numerical simulation. The hysteresis characteristic of the flange joint with a snap was analyzed using ANSYS. Based on the analysis of the deformation and sliding of the snap contact surface, a Jenkins friction element was used in parallel with a spring element to simulate a section of the flange joint, and the simplified model of the bending stiffness of the whole flange structure was established according to different states of each section during the bending deformation of the flange. The simplified model can be utilized to simulate the stiffness characteristics of the flange joint with a snap accurately. The rotor model was built based on the stiffness simplified model and beam element, and the influence of the flange joint with a snap on the steady-state response of the rotor was analyzed. The results show that the hysteresis characteristic of the flange joint with a snap can affect the peak frequency and reduce the response peak significantly with the increase of snap interference, producing a good vibration suppression effect.

     

  • loading
  • [1]
    姚星宇,王建军.航空发动机螺栓连接载荷与结构参数对连接刚度影响规律[J].推进技术,2017,38(2):424-433.YAO Xingyu,WANG Jianjun.Effects of load and structure parameters of aeroengine bolted joints on joint stiffness[J].Journal of Propulsion Technology,2017,38(2):424-433.(in Chinese)
    [2]
    姚星宇,王建军.航空发动机螺栓连接薄层单元建模方法[J].北京航空航天大学学报,2015,41(12):2269-2279.YAO Xingyu,WANG Jianjun.Modeling method of bolted joints of aero-engine based on thinlayer element[J].Journal of Beijing University of Aeronautics and Astronautics,2015,41(12):2269-2279.(in Chinese)
    [3]
    LIU Shuguo,MA Yanhong,ZHANG Dayi,et al.Studies on dynamic characteristics of the joint in the aeroengine rotor system[J].Mechanical Systems and Signal Processing,2012,29:120-136.
    [4]
    SCHWINGSHACKL C W,DI MAIO D,SEVER I,et al.Modeling and validation of the nonlinear dynamic behavior of bolted flange joints[J].Journal of Engineering for Gas Turbines and Power,2013,135(12):122504.1-122504.8.
    [5]
    QIN Z,HAN Q,CHU F.Bolt loosening at rotating joint interface and its influence on rotor dynamics[J].Engineering Failure Analysis,2016,59(1):456-466.
    [6]
    艾延廷,翟学,王志,等.法向接触刚度对装配体振动模态影响的研究[J].振动与冲击,2012,31(6):171-174.AI Yanting,ZHAI Xue,WANG Zhi,et al.Investigation on the influences of the normal contact stiffness to assembly’s vibration modes[J].Journal of Vibration and Shock,2012,31(6):171-174.(in Chinese)
    [7]
    YAO X,WANG J,ZHAI X.Research and application of improved thin layer element method of aeroengine bolted joints[J].Journal of Aerospace Engineering,2016,231(5):823-839.
    [8]
    LUAN Y,GUAN Z,CHENG G,et al.A simplified nonlinear dynamic model for the analysis of pipe sructures with bolted flange joints[J].Journal of Sound and Vibration,2012,331(2):325-344.
    [9]
    WANG C,ZHANG D,ZHU X,et al.Study on the stiffness loss and the dynamic influence on rotor systm of the bolted flange joint[C]∥ASME Turbo Expo 2014:Turbine Technical Conference and Exposition.Dusseldorf,Germany:ASME,2014:16-20.
    [10]
    GAUL L,LENZ J.Nonlinear dynamics of structures assembled by bolted joints[J].Acta Mechanica,1997,125(1/2/3/4):169-181.
    [11]
    QIN Z,YAN S,CHU F.Dynamic characteristics of launch vehicle and spacecraft connected by clamp band[J].Journal of Sound and Vibration,2011,330(10):2161-2173.
    [12]
    BOGRAD S,REUSS P A,SCHMIDT A,et al.Modeling the dynamics of mechanical joints[J].Mechanical Systems and Signal Processing,2011,25(8):2801-2826.
    [13]
    OLDFIELD M,OUYANG H,MOTTERSHEAD J.Simplified models of bolted joints under harmonic loading[J].Computers and Structures,2005,84(1/2):25-33.
    [14]
    OUYANG H,OLDFIELD M,MOTTERSHEAD J.Experimental and theoretical studies of a bolted joint excited by a torsional dynamic load[J].International Journal of Mechanical Sciences,2006,48(12):1447-1455.
    [15]
    HUANG F H,ZHANG D C,WANG H,et al.Mechanism and calculation theory of prying force for flexible flange connection[J].Journal of Constructional Steel Research,2017,132:97-107.
    [16]
    VAN-LONG H,JEAN-PIERRE J,JEAN-FRANOIS D.Behaviour of bolted flange joints in tubular structures under monotonic,repeated and fatigue loadings:Ⅰ experimental tests[J].Journal of Constructional Steel Research,2013,85:1-11.
    [17]
    LIU Y,WANG J,CHEN L.Dynamic characteristics of the flange joint with a snap in aeroengine[J].The International Journal of Acoustics and Vibration,2018,23(2):168-174.
    [18]
    李琳,刘久周,李超.干摩擦阻尼器对宽频多阶次激励减振效果分析[J].航空动力学报,2016,31(9):2171-2180.LI Lin,LIU Jiuzhou,LI Chao.Analysis on damping effect of dry friction damper under wideband multiharmonic excitation[J].Journal of Aerospace Power,2016,31(9):2171-2180.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (1702) PDF downloads(1579) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return