| Citation: | Influence of bearing arrangement on vibration characteristics of rotor shaft system[J]. Journal of Aerospace Power, 2019, 34(6): 1209-1216. doi: 10.13224/j.cnki.jasp.2019.06.004
|
| [1] |
EL-BADAWY,AYMAN A.Behavioral investigation of an onlinear nonideal vibrating system［J］.Journal of Vibration and Control,2007,13(2):203-217.
|
| [2] |
肖林京,吕楠,丁鸿昌,等.磁悬浮高速电动机转子-轴承系统耦合振动特性研究［J］.轴承,2016(7):1-4.XIAO Linjing,L Nan,DING Hongchang,et al.Study on coupling vibration characteristics of rotor-bearing system of maglev high speed motor［J］.Bearing,2016(7):1-4.(in Chinese)
|
| [3] |
苏朝君,李梓,徐逸然.某型工作船轴系振动特性及响应分析［J］.船海工程,2016,45(4):137-140.SU Zhaojun,LI Zi,XU Yiran.Vibration characteristics and response analysis of shaft system of a certain type of working ship［J］.Marine Engineering,2016,45(4):137-140.(in Chinese)
|
| [4] |
张晓东.艉轴承等效支点位置对轴系回旋振动的影响［J］.船海工程,2012,41(6):46-49.ZHANG Xiaodong.Effect of equivalent pivot position of stern bearing on axial cyclotron vibration［J］.Marine Engineering,2012,41(6):46-49.(in Chinese)
|
| [5] |
马骏,戴俊,孙炳南,等.轴承支撑特性及其对轴系动特性的影响［J］.噪声与振动控制,2011,31(5):22-26.MA Jun,DAI Jun,SUN Bingnan,et al.Bearing support characteristics and its effect on axial dynamic characteristics［J］.Noise and Vibration Control,2011,31(5):22-26.(in Chinese)
|
| [6] |
王滨.轴承刚度对船舶轴系振动特性的影响研究［J］.齐齐哈尔大学学报(自然科学版),2009,25(6):55-60.WANG Bin.Study on the effect of bearing stiffness on the vibration characteristics of ship axle system［J］.Journal of Qiqihar University (Natural Science Edition),2009,25 (6):55-60.(in Chinese)
|
| [7] |
徐军伟,李文斌.基于ANSYS的电主轴转子-轴承系统动静态性能分析［J］.机械设计与制造,2015(9):9-11,17.XU Junwei,LI Wenbin.Dynamic and static performance analysis of rotor-bearing system of electric spindle based on ANSYS［J］.Mechanical Design and Manufacturing,2015 (9):9-11,17.(in Chinese)
|
| [8] |
KUMAR C,SARANGI S.Dynamic response of an unbalanced rigid rotor bearing system with a nonlinear hydrodynamic force［J］.Journal of Computational and Nonlinear Dynamics,2018,13(9):090909.1-090909.6.
|
| [9] |
VAN T N,DAN M X.Analysis behavior of a rig shafting vibration set changes bearing parameters［J］.Applied Mechanics and Materials,2013,437:98-101.
|
| [10] |
LUO Jianbin,LIU Zhanhui,SHI Yang,et al.The research on supporting stiffness of LP rotor of ultra-supercritical turbine［C］∥Proceedings of Electrical and Control Engineering (ICECE).Yichang,Hubei:IEEE,2011:16-18.
|
| [11] |
ZAPOMEL J,FERFECKI P.A computational investigation on the reducing lateral vibration of rotors with rolling-element bearings passing through critical speeds by means of tuning the stiffness of the system supports［J］.Mechanism and Machine Theory,2011,46(5):707-724.
|
| [12] |
NAGAYA K,TAKEDA S,TSUKUI Y,et al.Active control method for passing through critical speeds of rotating shafts by changing stiffness of the supports with use of memory metals［J］.Journal of Sound and Vibration,1987,113(2):307-315.
|
| [13] |
HAN Dongjiang,HAO Long,YANG Jinfu.Dynamic characteristics of air cycle machine rotor system［J］.Shock and Vibration,2018,2018:1257274.1-1257274.16.
|
| [14] |
JAUHARI K.Vibration reduction of spindle-bearing system by design optimization［J］.WSEAS Transactions on Applied and Theoretical Mechanics,2018,13:85-91.
|
| [15] |
YANG B S,CHOI S P,KIM Y C.Vibration reduction optimum design of a steam-turbine rotor-bearing system using a hybrid genetic algorithm［J］.Structural and Multidisciplinary Optimization,2005,30(1):43-53.
|
| [16] |
BHAT R B,RAO J S,SANKAR T S.Optimum journal bearing parameters for minimum rotor unbalance response in synchronous whirl［J］.Journal of Mechanical Design,1982,104(2):339-344.
|
| [17] |
YUCEL E,SARUHAN H.Design optimization of rotor-bearing system considering critical speed using Taguchi method［J］.Journal of Process Mechanical Engineering,2017,231(2):138-146.
|
| [18] |
顾家柳,丁奎元,刘启洲,等.转子动力学［M］.北京:国防工业出版社,1985.
|
DownLoad: