| Citation: | Effect of temperature ratio on cooling characteristics of vane end-wall[J]. Journal of Aerospace Power, 2019, 34(6): 1344-1351. doi: 10.13224/j.cnki.jasp.2019.06.017
|
| [1] |
ZHANG Y,YUAN X,LIGRANI P.Film cooling effectiveness distribution on first-stage vane endwall with and without leading-edge fillets［J］.International Journal of Heat and Mass Transfer,2013,66:642-654.
|
| [2] |
张扬,齐士博,袁新.涡轮流场影响端壁气膜冷却的实验研究［J］.工程热物理学报,2011,32(6):941-944.ZHANG Yang,QI Shibo,YUAN Xin.Experimental investigation on the turbine blade platform film cooling effected by the flow field［J］.Journal of Engineering Thermophysics,2011,32(6):941-944.(in Chinese)
|
| [3] |
LI X Y,REN J,JIANG H D.Film cooling effectiveness distribution of cylindrical hole injections at different locations on a vane endwall［J］.International Journal of Heat and Mass Transfer,2015,90:1-14.
|
| [4] |
袁瑞明,浦健,王位,等.温比对第一级导叶端壁气膜冷却特性的影响［J］.航空动力学报,2018,33(8):1872-1879.YUAN Ruiming,PU Jian,WANG Wei,et al.Experimental investigation of temperature ratio effect on film cooling characteristics at a first-stage vane end-wall［J］.Journal of Aerospace Power,2018,33(8):1872-1879.(in Chinese)
|
| [5] |
PU J,WANG J H,MA S Y,et al.An experimental investigation of geometric effect of upstream converging slot-hole on end-wall film cooling and secondary vortex characteristics［J］.Experimental Thermal and Fluid Science,2015,69(6):58-72.
|
| [6] |
LIU C,ZHU H,BAI J,et al.Film cooling performance of converging slot-hole rows on a gas turbine blade［J］.International Journal of Heat and Mass Transfer,2010,53(23/24):5232-5241.
|
| [7] |
YAO Y,ZHANG J Z,WANG L P.Film cooling on a gas turbine blade suction side with converging slot-hole［J］.International Journal of Thermal Sciences,2013,65(3):267-279.
|
| [8] |
THRIFT A A,THOLE K A,HADA S.Effects of orientation and position of the combustor-turbine interface on the cooling of a vane endwall［J］.Journal of Turbomachinery,2012,134(6):291-301.
|
| [9] |
THOLE K A,KNOST D G.Heat transfer and film-cooling for the endwall of a first stage turbine vane［J］.International Journal of Heat and Mass Transfer,2005,48(25/26):5255-5269.
|
| [10] |
CHEN A F,SHIAU C C,HAN J C.Turbine blade platform film cooling with fan-shaped holes under simulated swirl purge flow and slashface leakage conditions［J］.Journal of Turbomachinery,2018,140(1):011006.1-011006.11.
|
| [11] |
KOHLI A,BOGARD D G.Effects of very high free-stream turbulence on the jet-mainstream interaction in a film cooling flow［J］.Journal of Turbomachinery,1998,120(4):785-790.
|
| [12] |
COLETTI F,ELKINS C J,EATON J K.An inclined jet in crossflow under the effect of streamwise pressure gradients［J］.Experiments in Fluids,2013,54(9):1589.1-1589.16.
|
| [13] |
BALDAUF S,SCHEURLEN M,SCHULZ A,et al.Correlation of film cooling effectiveness from thermographic measurements at engine like conditions［J］.Journal of Turbomachinery,2002,124(4):686-698.
|
| [14] |
PIETRZYK J R,BOGARD D G,CRAWFORD M E.Effects of density ratio on the hydrodynamics of film cooling［J］.Journal of Turbomachinery,1990,112(3):437-443.
|
| [15] |
SATTA F,TANDA G.Measurement of local heat transfer coefficient on the endwall of a turbine blade cascade by liquid crystal thermography［J］.Experimental Thermal and Fluid Science,2014,58(5):209-215.
|
| [16] |
张超,王湛,周嗣京,等.压力敏感涂料的标定及在气膜冷却效率测量中的应用［J］.航空动力学报,2011,26(12):2691-2697.ZHANG Chao,WANG Zhan,ZHOU Sijing,et al.Calibration of pressure sensitive paint and application to the measurement of film cooling effectiveness［J］.Journal of Aerospace Power,2011,26(12):2691-2697.(in Chinese)
|
| [17] |
WRIGHT L M,GAO Z H,YANG H T,et al.Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows［J］.Journal of Heat Transfer,2008,130(7):383-394.
|
| [18] |
KUNZE M,VOGELER K,CRAWFORD M,et al.Single and multiple row endwall film-cooling of a highly loaded first turbine vane with variation of loading［J］.Journal of Turbomachinery,2014,136(6):061012.1-061012.14.
|
| [19] |
BARIGOZZI G,FRANCHINI G,PERDICHIZZI A,et al.Film cooling of a contoured endwall nozzle vane through fan-shaped holes［J］.International Journal of Heat and Mass Transfer,2010,31(4):576-585.
|
| [20] |
STRAUB D L,SIDWELL T G,CASLETON K H,et al.High temperature film cooling test facility and preliminary test results［R］.ASME Paper GT2012-69767,2012.
|
| [21] |
MONTOMOLI F,MASSINI M,YANG H,et al.The benefit of high-conductivity materials in film cooled turbine nozzles［J］.International Journal of Heat and Fluid Flow,2012,34:107-116.
|
| [22] |
SU H,PU J,WANG J H,et al.An experimental investigation of cooling characteristics at a vane end-wall with a locally enhanced hole-layout［J］.Experimental Thermal and Fluid Science,2018,96(1):137-145.
|
| [23] |
CUNHA F J,DAHMER M T,CHYU M K.Analysis of airfoil trailing edge heat transfer and its significance in thermal-mechanical design and durability［J］.Journal of Turbomachinery,2006,128(4):738-746.
|
| [24] |
TASLIM M E,WADSWORTH C M.An experimental investigation of the rib surface-averaged heat transfer coefficient in a rib-roughened square passage［J］.Journal of Turbomachinery,1997,119(2):381-389.
|
DownLoad: