| Citation: | Failure mechanism of TiN/Ti strength and tough coating under high-speed sand-dust erosion[J]. Journal of Aerospace Power, 2019, 34(9): 1866-1872. doi: 10.13224/j.cnki.jasp.2019.09.002
|
| [1] |
何光宇,李应红,柴艳,等.航空发动机压气机叶片砂尘冲蚀防护涂层关键问题综述［J］.航空学报,2015,36(6):1733-1743.HE Guangyu,LI Yinghong,CHAI Yan,et al.Review of key issues on coating against sand erosion of aero-engine compressor blade［J］.Acta Aeronautica et Astronautica Sinica,2015,36(6):1733-1743.(in Chinese)
|
| [2] |
CATER T J.Common failures in gas turbine blades［J］.Engineering Failure Analysis,2005,12(2):237-247.
|
| [3] |
YANG Q,ZHAO L R,CAI F,et al.Wear,erosion and corrosion resistance of CrTiAlN coating deposited by magnetron sputtering［J］.Surface and Coatings Technology,2008,202(16):3886-3892.
|
| [4] |
PEPI M,SQUILLACIOTI R,PFLEDDERER L,et al.Solid particle erosion testing of helicopter rotor blade materials［J］.Journal of Failure Analysis and Prevention,2012,12(1):96-108.
|
| [5] |
BOUSSER E,MARTINU L,KLEMBERG J E,et al.Solid particle erosion mechanisms of protective coatings for aerospace applications［J］.Surface and Coatings Technology,2014,257:165-181.
|
| [6] |
BOUSSER E,MARTINU L,KLEMBERG-SAPIEHA J E.In situ real-time solid particle erosion testing methodology for hard protective coatings［J］.Surface and Coatings Technology,2013,237:313-319.
|
| [7] |
LATHABAI S,OTTMLLER M,FERNANDEZ I.Solid particle erosion behaviour of thermal sprayed ceramic,metallic and polymer coatings［J］.Wear,1998,221(2):93-108.
|
| [8] |
KRELLA A K.Cavitation erosion resistance of Ti/TiN multilayer coatings［J］.Surface and Coatings Technology,2013,228:115-123.
|
| [9] |
SHIMIZU K,NOGUCHI T,SEITON H,et al．FEM analysis of the dependency on impact angle during erosive Wear［J］.Wear,1999,233/234/235:157-159.
|
| [10] |
WENSINK H,ELWENSPOEK M C.A closer look at the ductile-brittle transition in solid particle erosion［J］.Wear,2002,253(9/10):1035-1043.
|
| [11] |
徐伟胜,何光宇,蔡振兵,等.硬质颗粒重复冲击TiN/Ti涂层损伤分析［J］.中国表面工程,2017,30(5):28-35.XU Weisheng,HE Guangyu,CAI Zhenbing,et al.Damage analysis of TiN/Ti coatings under cycling impact with hard particles［J］.China Surface Engineering,2017,30(5):28-35.(in Chinese)
|
| [12] |
BORAWSKI B,SINGH J,TODD J A,et al.Multi-layer coating design architecture for optimum particulate erosion resistance［J］.Wear,2011,271(11/12):2782-2792.
|
| [13] |
BORAWSKI B,TODD J A,SINGH J,et al.The influence of ductile interlayer material on the particle erosion resistance of multilayered TiN based coatings［J］.Wear,2011,271(11/12):2890-2898.
|
| [14] |
REEDY M W,EDEN T J,POTTER J K,et al.Erosion performance and characterization of nanolayer (Ti,Cr)N hard coatings for gas turbine engine compressor blade applications［J］.Surface and Coatings Technology,2011,206(2/3):464-472.
|
| [15] |
YANG Q,SEO D Y,ZHAO L R,et al.Erosion resistance performance of magnetron sputtering deposited TiAlN coatings［J］.Surface and Coatings Technology,2004,188/189:168-173.
|
| [16] |
SONG Shenglin,ZHOU Kesong,DAI Mingjiang,et al.Structural,mechanical,and sand erosion properties of TiN/Zr/ZrN multilayer coatings［J］.Vacuum,2015,122:179-186.
|
| [17] |
曹鑫,王冠,何卫锋,等.TC4钛合金与多层TiN/Ti涂层的砂尘冲蚀损伤试验［J］.航空动力学报,2016,31(9):2218-2225.CAO Xin,WANG Guan,HE Weifeng,et al.Sand erosion damage test on TC4 titanium alloy and TiN/Ti multilayer coating［J］.Journal of Aerospace Power,2016,31(9):2218-2225.(in Chinese)
|
| [18] |
FEUERSTEIN A,KLEYMAN A.Ti-N multilayer systems for compressor airfoil sand erosion protection［J］.Surface and Coatings Technology,2009,204(6/7):1092-1096.
|
| [19] |
吴小梅,李伟光,陆峰.固体颗粒冲蚀对钛合金ZrN涂层抗冲蚀性能的影响［J］.航空材料学报,2006,26(6):26-29.WU Xiaomei,LI Weiguang,LU Feng.Effect of solid particle erosion on erosion resistance of ZrN coating on titanium alloy［J］.Journal of Aeronautical Materials,2006,26(6):26-29.(in Chinese)
|
DownLoad: