| Citation: | YAN Yangyang, ZHUANG Baoshun, GAO Peixin. Sealing characteristics of aviation pipeline fittings and influence of fluid temperature[J]. Journal of Aerospace Power, 2019, 34(11): 2414-2422. doi: 10.13224/j.cnki.jasp.2019.11.013 |
| [1] |
LU C,WANG S,WANG X.A multi-source information fusion fault diagnosis for aviation hydraulic pump based on the new evidence similarity distance[J].Aerospace Science and Technology,2017,71:392-401.
|
| [2] |
王振兴,邱明星,王建军.拉伸载荷下管路连接副的密封性分析[J].航空动力学报,2011,26(8):1866-1870.WANG Zhenxing,QIU Mingxing,WANG Jianjun.Sealing analysis of pipeline connection pairs under tensile load[J].Journal of Aerospace Power,2011,26(8):1866-1870.(in Chinese)
|
| [3] |
夏茂松.卡套接头及其应用[J].液压气动与密封,2000(2):46-47.XIA Maosong.Sleeve fittings and its application[J].Hydraulic Pneumatic and Sealing,2000(2):46-47.(in Chinese)
|
| [4] |
MIHSEIN M,SEYMOUR M D.Intermixing twin ferrule tube fittings-is it safe?[J].Journal of Engineering Design,1999,10(4):391-416.
|
| [5] |
颜斌,孙念友,刘安平.24°锥卡套接头的密封原理及防漏油分析[J].现代制造技术与装备,2015(4):64,79.YAN Bin,SUN Nianyou,LIU Anping.Sealing principle and oil leakage prevention analysis of 24 degree tapered sleeve fittings[J].Modern Manufacturing Technology and Equipment,2015(4):64,79.(in Chinese)
|
| [6] |
陈胜,章海.卡套式管接头SolidWorks Simulation分析[J].机械工程师,2012(6):99-101.CHEN Sheng,ZHANG Hai.SolidWorks Simulation analysis of cased pipe fittings[J].Mechanical Engineer,2012(6):99-101.(in Chinese)
|
| [7] |
WENK J F,STEPHENSL S,LATTIME S B,et al.A multi-scale finite element contact model using measured surface roughness for a radial lip seal[J].TribologyInternational,2016,97:288-301.
|
| [8] |
PREZ-RFLOS F,LARSSON R,ALMQVIST A.Modelling of leakage on metal-to-metal seals[J].Tribology International,2016,94:421-427.
|
| [9] |
JIA X,JUNG S,HAAS W,et al.Numerical simulation and experimental study of shaft pumping by plunge ground shafts with rotary lip seals[J].Tribology International,2012,48:155-161.
|
| [10] |
ZHANG F,LIU J,DING X,et al.An approach to calculate leak channels and leak rates between metallic seal surfaces[J].Journal of Tribology,2017,139(1):011708.1-011708.11.
|
| [11] |
THATTE A,SALANT R F.Effects of multi-scale viscoelasticity of polymers on high-pressure,high-frequency seal dynamics[J].Tribology International,2012,52:75-86.
|
| [12] |
ALLEC N,HASSAN Z,LI Shang,et al.ThermalScope:multi-scale thermal analysis for nanometer-scale integrated circuits[J].IEEE/ACM International Conference on Computer-aided Design,2008,28(6):603-610.
|
| [13] |
LAN T,YOGENDRA K J.A multigrid based multi-scale thermal analysis approach for combined mixed convection,conduction,and radiation due to discrete heating[J].Journal of Heat Transfer,2005,127(1):18-26.
|
| [14] |
LI Li,COCCIOLI R,NARY K,et al.Multi-scale thermal analysis of GaAs RF device[R].SanJose,CA,US:Semiconductor Thermal Measurement and Management IEEE Twenty First Annual IEEE Symposium,2005.
|
| [15] |
MIZUSHINA H,HIROKAWA M,KAMIYA J,et al.A simple multi-scale thermal analysis technique for printed wiring board models[J].Jiep Meeting,2008,22(1):83-85.
|
| [16] |
HUANG Y Q,LIU Z T,LU G D,et al.Multi-scale thermal analysis approach for the typical heat exchanger in automotive cooling systems[J].International Communications in Heat and Mass Transfer,2014,59:75-87.
|
| [17] |
LAN T,YOGENDRA K J.A multi-grid based multi-scale thermal analysis approach for combined mixed convection,conduction,and radiation due to discrete heating[J].Journal of Heat Transfe,2005,127(1):18-26.
|
| [18] |
LIU S G,MA Y H,ZHANG D Y,et al.Studies on dynamic characteristics of the joint in the aero-engine rotor system[J].Mechanical Systems and Signal Processing,2012,29:120-136.
|
| [19] |
郭辉,王平军.飞机液压系统温度控制[R].西安:中国航空学会控制与应用第十二届学术年会,2006.
|