Volume 34 Issue 11
Nov.  2019
Turn off MathJax
Article Contents
LI Renfeng, CHEN Shuai, HU Xiaolei. Influence of throat diameter ratio of two-stage nozzle on gas-steam ejection parameters[J]. Journal of Aerospace Power, 2019, 34(11): 2458-2465. doi: 10.13224/j.cnki.jasp.2019.11.018
Citation: LI Renfeng, CHEN Shuai, HU Xiaolei. Influence of throat diameter ratio of two-stage nozzle on gas-steam ejection parameters[J]. Journal of Aerospace Power, 2019, 34(11): 2458-2465. doi: 10.13224/j.cnki.jasp.2019.11.018

Influence of throat diameter ratio of two-stage nozzle on gas-steam ejection parameters

doi: 10.13224/j.cnki.jasp.2019.11.018
  • Received Date: 2019-05-13
  • Publish Date: 2019-11-28
  • The multi-phase flow models coupling with projectile motion and vaporization were established respectively under different conditions of throat diameter ratio. What’s more, the influence of throat diameter ratio on gas-steam ejection flow field, ejection device load and interior ballistics was studied. Results showed that increasing or decreasing the throat diameter ratio within a certain range led to the deterioration of ejection device flow field and launch stability. When the throat diameter ratio increased too large, the spray pressure difference meeting the working conditions could not be established. When the throat diameter ratio was too small, the shock wave upward movement eventually led to abnormity of the gas generator. When the throat diameter ratio was 1.46, the pressure difference of tail cover was the smallest and the launch stability was the best. The maximum temperature of launch tube was controlled within the design value of 800K, and the interior ballistic parameters could satisfy the design requirements.

     

  • loading
  • [1]
    HILLEBRECHT H A.Submarine missile eject system:US4643072[P].1987-02-17.
    [2]
    赵险峰,王俊杰.潜地弹道导弹发射系统内弹道学[M].哈尔滨:哈尔滨工程大学出版社,2000.
    [3]
    李咸海,王俊杰.潜地导弹发射动力系统[M].哈尔滨:哈尔滨工程大学出版社,1999.
    [4]
    EDQUIST C T.Prediction of the launch pulse for gas generator launched missiles[R].AIAA 88-3290,1988.
    [5]
    袁曾凤.火箭导弹弹射内弹道学[M].北京:北京工业学院出版社,1987.
    [6]
    袁曾凤.弹射内弹道中的相似方法研究[J].兵工学报,1987,8(1):8-18.YUAN Zengfeng.Research on similarity method in ejection interior ballistics[J].Acta Armamentarii,1987,8(1):8-18.(in Chinese)
    [7]
    张仁军,鲍福廷.两种不同注水方式的燃气蒸汽式发射系统内弹道性能比较[J].固体火箭技术,2005,28(1):5-9.ZHANG Renjun,BAO Futing.Comparison of internal ballistic properties between gas and steam launching systems in two different modes of water injection[J].Journal of Solid Rocket Technology,2005,28(1):5-9.(in Chinese)
    [8]
    肖虎斌.潜射导弹燃气蒸汽发射装置的内弹道建模[J].舰船科学技术,2010,32(2):35-38.XIAO Hubin.Interior ballistics modeling of submarine based missile launching unit[J].Ship Science and Technology,2010,32(2):35-38.(in Chinese)
    [9]
    赵世平,鲍福廷.燃气-蒸汽式发射系统内弹道若干问题研究[J].固体火箭技术,2003,26(3):7-10.ZHAO Shiping,BAO Futing.Analysis of several coefficients of interior ballistic evaluation for gas and steam launching system[J].Journal of Solid Rocket Technology,2003,26(3):7-10.(in Chinese)
    [10]
    芮守祯,邢玉明,梁材.准一维超音速气液两相流数值模拟[J].热能动力工程,2011,26(4):393-396,489.RUI Shouzhen,XING Yuming,LIANG Cai.Numerical simulation of a quasi-one-dimensional supersonic gas-liquid two-phase flow[J].Journal of Engineering for Thermal Energy and Power,2011,26(4):393-396,489.(in Chinese)
    [11]
    白俊华,胡罄博.进气角度和初始粒径对发射筒内流动特性的影响[J].固体火箭技术,2013,36(2):165-169.BAI Junhua,HU Qingbo.Impact of injection angle and initial particles diameter on interior flow characteristic of silo[J].Journal of Solid Rocket Technology,2013,36(2):165-169.(in Chinese)
    [12]
    刘伯伟,姜毅.汽化效应对燃气蒸汽式弹射气液两相流场的影响[J].固体火箭技术,2014,37(2):156-160.LIU Bowei,JIANG Yi.Influence of vaporization effect on gas-liquid two-phase flow field of ejection in combustion gas and vapor mode[J].Journal of Solid Rocket Technology,2014,37(2):156-160.(in Chinese)
    [13]
    胡晓磊,乐贵高,马大为,等.水下燃气-蒸汽弹射气-液两相流场数值研究[J].航空动力学报,2015,30(1):164-172.HU Xiaolei,LE Guigao,MA Dawei,et al.Numerical study of gas-steam ejection gas-liquid two-phase flow field under water[J].Journal of Aerospace Power,2015,30(1):164-172.(in Chinese)
    [14]
    胡晓磊,孙船斌,李仁凤,等.喷水孔数量对燃气-蒸汽弹射内弹道的影响[J].弹道学报,2018,30(2):37-41,46.HU Xiaolei,SUN Chuanbin,LI Renfeng,et al.Effect of water-spout number on gas-steam ejection interior-ballistics[J].Journal of Ballistics,2018,30(2):37-41,46.(in Chinese)
    [15]
    李仁凤,乐贵高,马大为,等.进气角与注水规律对燃气-蒸汽弹射影响研究[J].航空动力学报,2017,32(4):961-969.LI Renfeng,LE Guigao,MA Dawei,et al.Influence of inlet angle and injection water law on gas-steam ejection[J].Journal of Aerospace Power,2017,32(4):961-969.(in Chinese)
    [16]
    李仁凤,乐贵高,马大为,等.结构参数对燃气-蒸汽弹射载荷和弹道影响[J].上海交通大学学报,2016,50(11):1789-1794.LI Renfeng,LE Guigao,MA Dawei,et al.Effect of structural parameters on gas-steam ejection power system[J].Journal of Shanghai Jiao Tong University,2016,50(11):1789-1794.(in Chinese)
    [17]
    ARIAFAR K,BUTTSWORTH D,SHARIFI N,et al.Ejector primary nozzle steam condensation:Area ratio effects and mixing layer development[J].Applied Thermal Engineering,2014,71(1):519-527.
    [18]
    UTOMO T,JIN Zhenhua,RAHMAN M,et al.Investigation on hydrodynamics and mass transfer characteristics of a gas-liquid ejector using three-dimensional CFD modeling[J].Journal of Mechanical Science and Technology,2008,22(9):1821-1829.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (771) PDF downloads(359) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return