| Citation: | TANG Xinzi, WANG Zhe, WANG Xiaoyu. Aerodynamic robustness of centrifugal compressor impeller under multi-source uncertainty coupling[J]. Journal of Aerospace Power, 2020, 35(1): 196-204. doi: 10.13224/j.cnki.jasp.2020.01.023
|
| [1] |
PAEPE W D,COPPITTERS D,ABRAHAM S.Robust operational optimization of a typical micro gas turbine［J］.Energy Procedia,2019,158:5795-5803.
|
| [2] |
PANIZZA A,RUBINO D T,TAPINASSI L.Efficient uncertainty quantification of centrifugal compressor performance using polynomial chaos［R］.ASME Paper GT2014-25081,2014.
|
| [3] |
WU T,CAO Y,YANG J.Analysis of the influence of blade’s machining error on aerodynamic performance of impeller based on NUMECA［J］.Procedia CIRP,2015,27:155-162.
|
| [4] |
JAVED A,PECNIK R,BUIJTENEN J P V.Optimization of a centrifugal compressor impeller for robustness to manufacturing uncertainties［J］.Journal of Engineering for Gas Turbines and Power,2016,138(11):1-11.
|
| [5] |
JU Y,ZHANG C.Robust design optimization method for centrifugal impellers under surface roughness uncertainties due to blade fouling［J］.Chinese Journal of Mechanical Engineering,2016,29(2):301-314.
|
| [6] |
MEHRABI-KANDSAR S,MIRZAZADEH A,GHOLAMI-QADIKOLAEI A.The quality function deployment method under uncertain environment using evidential reasoning:a case study of compressor manufacturing ［J］.International Journal of System Assurance Engineering and Management,2017,8(2):1-18.
|
| [7] |
SUN Zhenzhong,ZOU Wangzhi,ZHENG Xinqian.Instability detection of centrifugal compressors by means of acoustic measurements［J］.Aerospace Science and Technology,2018,82-83:628-635.
|
| [8] |
GOPINATHRAO N,BAGSHAW D,MABILAT C.Non-deterministic CFD simulation of a transonic compressor rotor［C］∥American Society of Mechanical Engineers Turbo Expo:Power for Land,Sea,and Air,Volume 6:Structures and Dynamics.Orlando,US:ASME,2009,1125-1134.
|
| [9] |
SESHADRI P,PARKS G,JARRETT J.Towards robust design of axial compressors with uncertainty quantification［R］.AIAA 2013-1815,2013.
|
| [10] |
唐新姿,王喆,肖鹏,等.气动边界不确定条件下离心压气机叶轮优化设计［J］.机械科学与技术,2019,38(6):970-976. TANG Xinzi,WANG Zhe,XIAO Peng,et al.Optimal design of centrifugal compressor impeller under uncertain aerodynamic boundary［J］.Machanical Science and Technology for Aerospace Engineering,2019,38(6):970-976.(in Chinese)
|
| [11] |
高丽敏,蔡宇桐,徐浩亮,等.压气机叶片加工误差影响不确定分析［J］.航空动力学报,2017,32(9):2253-2259. GAO Limin,CAI Yutong,XU Haoliang,et al.Uncertainty analysis of machining error influence of compressor blade［J］.Journal of Aerospace Power,2017,32(9):2253-2259.(in Chinese)
|
| [12] |
傅珏,蒋伟,柳一鸣,等.叶顶间隙几何不确定性对离心叶轮气动性能的影响［J］.西安交通大学学报,2018,52(11):51-57. FU Jue,JIANG Wei,LIU Yiming,et al.Influence of tip clearance geometrical uncertainties on the aerodynamic performance of centrifugal impeller［J］.Journal of Xi’an Jiaotong University,2018,52(11):51-57.(in Chinese)
|
| [13] |
HATHAWAY M D,CHRISS R M,STRAZISAR A J,et al.Laser anemometer measurements of the three-dimensional rotor flow field in the NASA low-speed centrifugal compressor ［R］.Washington DC:NASA,1995.
|
| [14] |
KRAIN H,HOFFMANN W.Verification of an impeller design by laser measurements and 3D-viscous flow calculations［R］.New York:American Society of Mechanical Engineers,1989.
|
| [15] |
苗森春,杨军虎,王晓晖,等.基于神经网络-遗传算法的液力透平叶片型线优化［J］.航空动力学报,2015,30(8):1918-1925. MIAO Senchun,YANG Junhu,WANG Xiaohui,et al.Blade pattern optimization of the hydraulic turbine based on neural network and genetic algorithm［J］.Journal of Aerospace Power,2015,30(8):1918-1925.(in Chinese)
|
| [16] |
LEE H,LEE D J,KWON H.Development of an optimized trend kriging model using regression analysis and selection process for optimal subset of basic functions［J］.Aerospace Science and Technology,2018,77:273-285.
|
| [17] |
韩忠华.Kriging模型及代理优化算法研究进展［J］.航空学报,2016,37(11):3197-3225. HAN Zhonghua.Research progress of Kriging model and agent optimization algorithm［J］.Acta Aeronautica et Astronautica Sinica,2016,37(11):3197-3225.(in Chinese)
|
| [18] |
罗明,左志涛,李弘扬,等.基于BP人工神经网络的离心压气机叶轮多目标优化设计方法［J］.航空动力学报,2016,31(10):2424-2431. LUO Ming,ZUO Zhitao,LI Hongyang,et al.Multi-objective optimization design of centrifugal compressor impeller based on BP artificial neural network［J］.Journal of Aerospace Power,2016,31(10):2424-2431.(in Chinese)
|
DownLoad: