Volume 35 Issue 4
Apr.  2020
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2020  >  35(4): 693-703
YAO Chunyi, ZHU Huiren, LI Xinlei. Effect of showerhead injection of leading edge on cooling characteristics for turbine vane pressure side[J]. Journal of Aerospace Power, 2020, 35(4): 693-703. doi: 10.13224/j.cnki.jasp.2020.04.003
Citation: YAO Chunyi, ZHU Huiren, LI Xinlei. Effect of showerhead injection of leading edge on cooling characteristics for turbine vane pressure side[J]. Journal of Aerospace Power, 2020, 35(4): 693-703. doi: 10.13224/j.cnki.jasp.2020.04.003
shu

Effect of showerhead injection of leading edge on cooling characteristics for turbine vane pressure side

doi: 10.13224/j.cnki.jasp.2020.04.003
  • 1.

    School of Power and Energy,Northwestern Polytechnical University,Xi'an 710129,China

  • 2.

    Shaanxi Key Laboratory of Thermal Sciences in Aero-engine System,Northwestern Polytechnical University,Xi'an 710129,China

  • Received Date: 2019-10-11
  • Publish Date: 2020-04-28
    Abstract
  • In order to evaluate the effect of showerhead injection of leading edge on the cooling characteristics of turbine vane pressure side with multirow film holes,an experiment was carried out in a high subsonic wind tunnel to obtain the film cooling effectiveness and heat transfer coefficient on the vane surface with/without showerhead injection of leading edge. The inlet Reynolds number of the cascade (based on the true chord length of the vane) varied from 2.0×105 to 4.0×105,the exit isentropic Mach number was 0.95. Six rows of cylinder holes were arranged on the leading edge and the range of mass flow ratio was 2.46%-4.57%,the pressure side was assigned with 6 rows of cylinder holes and the mass flow ratio varied from 2.00% to 3.71%. The experimental results showed that without showerhead injection of leading edge,the film cooling effectiveness on the front half of the pressure side was less affected by mass flow ratio,however,that on the rear half increased with the increase of mass flow ratio. The showerhead injection of leading edge raised the film cooling effectiveness of pressure side with multi-row holes by 20%~70%,and made the distribution of film cooling effectiveness more uniform along the flow direction. No matter whether the showerhead injection of leading edge existed,the heat transfer coefficient ratio on the pressure side increased with the mass flow ratio increasing. Viewed from streamwise, the showerhead injection of leading edge increased the heat transfer coefficient ratio in the region of leading and trailing edges on the pressure side,however,exerted a little effect in the middle region of pressure side.

     

    • FullText(HTML)
  • loading
    • References(25)
  • [1]
    HAN J C,DUTTA S,EKKAD S.Gas turbine heat transfer and cooling technology［M］.New York:Chemical Rubber Company Press,2012.
    [2]
    NASIR S,BOLCHOZ T,NG W F,et al.Showerhead film cooling performance of a turbine vane at high freestream turbulence in a transonic cascade［J］.Journal of Turbomachinery,2012,134(5):051021.1-051021.11.
    [3]
    GAO Z,HAN J C.Influence of film-hole shape and angle on showerhead film cooling using PSP technique［J］.Journal of Heat Transfer,2009,131(6):061701.1-061701.11.
    [4]
    NEWMAN A,XUE S,NG W,et al.Performance of a showerhead and shaped hole film cooled vane at high freestream turbulence and transonic conditions［R］.ASME Paper GT-2011-45142,2011.
    [5]
    ZHANG L,MOON H K.Turbine blade film cooling study:the effects of film hole location on the pressure side［R］.ASME Paper GT2007-27546,2007.
    [6]
    FU Z Y,ZHU H R,LIU C L,et al.An experimental investigation of full-coverage film cooling effectiveness and heat transfer coefficient of a turbine guide vane in a linear transonic cascade［R］.ASME Paper GT2016-56839,2016.
    [7]
    POLANKA M D,ETHRIDGE M I,CUTBIRTH J M,et al.Effects of showerhead injection on film cooling effectiveness for a downstream row of holes［R］.ASME Paper 2000-GT-240,2000.
    [8]
    SELLERS J P.Gaseous film cooling with multiple injection stations［J］.AIAA Journal,1963,1(9):2154-2156.
    [9]
    CUTBIRTH J M,BOGARD D G.Evaluation of pressure side film cooling with flow and thermal field measurements:Part Ⅰ showerhead effects［J］.Journal of Turbomachinery,2002,124(4):670-677.
    [10]
    CUTBIRTH J M,BOGARD D G.Evaluation of pressure side film cooling with flow and thermal field measurements:Part Ⅱ turbulence effects［J］.Journal of turbomachinery,2002,124(4):678-685.
    [11]
    SCHNEIDER M,PARNEIX S,VON WOLFERSDORF J.Effect of showerhead injection on superposition of multi-row pressure side film cooling with fan shaped holes［R］.ASME Paper GT2003-38693,2003.
    [12]
    GAO Z,NARZARY D,MHETRAS S,et al.Full-coverage film cooling for a turbine blade with axial-shaped holes［J］.Journal of Thermophysics and Heat Transfer,2008,22(1):50-61.
    [13]
    刘聪,朱惠人,付仲议,等.涡轮导叶吸力面簸箕型孔气膜冷却特性实验研究［J］.推进技术,2016,37(6):1142-1150. LIU Cong,ZHU Huiren,FU Zhongyi,et al.Experimental study of film cooling characteristics for dust-pan shaped holes on suction side in turbine guide vane［J］.Journal of Propulsion Technology,2016,37(6):1142-1150.(in Chinese)
    [14]
    ELNADY T,HASSAN I,KADEM L,et al.Experimental investigation of double rows film cooling on vane pressure side［R］.International Mechanical Engineering Congress and Exposition,IMECE2012-85875,2012.
    [15]
    朱惠人,成文娟,李红才.短周期风洞叶栅瞬态换热实验数据处理［J］.航空动力学报,2011,26(6):1301-1309. ZHU Huiren,CHENG Wenjuan,LI Hongcai.Data processing of blades transient heat transfer experiment in short duration wind tunnel［J］.Journal of Aerospace Power,2011,26(6):1301-1309.(in Chinese)
    [16]
    赵丹,刘存良,朱惠人,等.涡轮叶片前缘对冲孔排气膜冷却特性的数值研究［J］.航空动力学报,2017,32(11):2609-2618. ZHAO Dan,LIU Cunliang,ZHU Huiren,et al.Numerical studies on film cooling performance of turbine vane leading edge with counter-inclined structure［J］.Journal of Aerospace Power,2017,32(11):2609-2618.(in Chinese)
    [17]
    李红才,朱惠人,任战鹏,等.短周期跨声速风洞叶栅换热实验验证［J］.西安交通大学学报,2013,47(9):49-54. LI Hongcai,ZHU Huiren,REN Zhanpeng,et al.Cascade heat transfer experiment validation in short duration transonic wind tunnel［J］.Journal of Xian Jiaotong University,2013,47(9):49-54.(in Chinese)
    [18]
    NASIR S,CARULLO J S,NG W F,et al.Effects of large scale high freestream turbulence and exit reynolds number on turbine vane heat transfer in a transonic cascade［J］.Journal of Turbomachinery,2009,131(2):021021.1-021021.11.
    [19]
    MOFFAT R J.Describing the uncertainties in experimental results［J］.Experimental Thermal and Fluid Science,1988,1(1):3-17.
    [20]
    DYSON T E,MCCLINTIC J W,BOGARD D G,et al.Adiabatic and overall effectiveness for a fully cooled turbine vane［R］.ASME Paper GT2013-94928,2013.
    [21]
    ZHAO L,WANG T.An investigation of treating adiabatic wall temperature as the driving temperature in film cooling studies［J］.Journal of Turbomachinery,2012,134(6).061032.1-061032.9.
    [22]
    DEESJ E,BOGARD D G,LEDEZMA G A,et al.Overall and adiabatic effectiveness values on a scaled up,simulated gas turbine vane:Part Ⅰ experimental measurements［R］.ASME Paper GT2011-46612,2011.
    [23]
    SEN B,SCHMIDT D L,BOGARD D G.Film cooling with compound angle holes:heat transfer［J］.Journal of Turbomachinery,1996,118(4):800-806.
    [24]
    CHAVEZ K,SLAVENS T N,BOGARD D.Experimentally measured effects of incidence angle on the adiabatic and overall effectiveness of a fully cooled turbine airfoil with shaped showerhead holes［J］.Journal of Turbomachinery,2017,139(9):091007.1-091007.10.
    [25]
    CHAVEZ K,SLAVENS T N,BOGARD D.Effects of internal and film cooling on the overall effectiveness of a fully cooled turbine airfoil with shaped holes［R］.ASME Paper GT2016-57992,2016.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(3437.0KB)
    XML

    Article Metrics

    Article views (791) PDF downloads(782) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return