| Citation: | GAO Xiang, LI Mi, WANG Dingqi. Numerical study on the influence of aero-engine intake and exhaust system on aerodynamic characteristics of aircraft[J]. Journal of Aerospace Power, 2020, 35(5): 1000-1008. doi: 10.13224/j.cnki.jasp.2020.05.012 |
| [1] |
MICHAEL E B,WILLIAM H B.Accounting of aerodynamic forces on airframe/propulsion systems[R].AGARD-CP-150,1974.
|
| [2] |
ABERNETHY R B,ADAMS R J.In-flight thrust determination[R].SAE AIR 1703,1985.
|
| [3] |
PATERSON J H,MACWILKINSON D G,BLACKERBY W T.A survey of drag prediction techniques applicable to subsonic and transonic aircraft design[R].AGARD-CP-124,1973.
|
| [4] |
MACWILKINSON D G,BLACKERBY W T,PATERSON J H.Correlation of full-scale drag predictions with flight measurements on the C-141A aircraft:phase 2 wind tunnel test,analysis,and prediction techniques[R].NASA CR-2333,1974.
|
| [5] |
RICHEY G K.Wind tunnel/flight test correlation on the B-1 nacelle afterbody/nozzle[R].AIAA 76-673,1976.
|
| [6] |
SCHOELEN F J.B-1 inlet and nozzle flight performance determination program[R].AIAA 81-1852,1981.
|
| [7] |
BOPPE C W.Elements of computational engine-airframe integration[R].AIAA 84-0117,1984.
|
| [8] |
WILLHITE P G,JASPER D W,ROMER W W.A critical evaluation of CFD predictions of full aircraft drag increments[R].AIAA 95-2289,1995.
|
| [9] |
HIROSE N,ASAI K,IKAWA K.3-D Euler flow analysis of fanjet engine and turbine powered simulator with experimental comparison in transonic speed[R].AIAA 89-1835,1989.
|
| [10] |
DEESE J E,AGARWAL R K.Calculation of axisymmetric inlet flowfield using the Euler equations[R].AIAA 83-1853,1983.
|
| [11] |
谭兆光,陈迎春,李杰.机体/动力装置一体化分析中的动力影响效应数值模拟[J].航空动力学报,2009,24(8):1766-1772. TAN Zhaoguang,CHEN Yingchun,LI Jie.Numerical simulation method for the powered effects in airframe/propulsion integration analysis[J].Journal of Aerospace Power,2009,24(8):1766-1772.(in Chinese)
|
| [12] |
党亚斌,刘凯礼,谭兆光,等.民用飞机尾吊发动机安装效应对推力影响研究[J].推进技术,2018,39(8):1712-1719. DANG Yabin,LIU Kaili,TAN Zhaoguang,et al.Numerical study of engine installed effect on a tail-mounted civil aircraft thrust characteristic[J].Journal of Propulsion Technology,2018,39(8):1712-1719.(in Chinese)
|
| [13] |
谭伟伟,颜洪,郝海兵.一种新的涡扇发动机动力特性计算模型[J].航空计算技术,2016,46(6):60-63. TAN Weiwei,YAN Hong,HAO Haibing.A new simulation model of turbofan engine with power[J].Aeronautical Computation Technique,2016,46(6):60-63.(in Chinese)
|
| [14] |
谭伟伟.混合网格Navier-Stokes方程并行计算软件开发与应用研究[D].西安:西安航空计算技术研究所,2011. TAN Weiwei.Development and application of hybrid grid based parallel Navier-Stokes solver[D].Xi’an:Aeronautics Computing Techniques Research Institute,2011.(in Chinese)
|
| [15] |
谭伟伟,颜洪,聂智军,等.大型客机涡扇发动机动力特性模拟[J].航空学报,2019,40(1):522428.1-522428.12. TAN Weiwei,YAN Hong,NIE Zhijun,et al.Propulsion performance simulation of turbofan engine for large civil aircraft[J].Acta Aeronautica et Astronautica Sinica,2019,40(1):522428.1-522428.12.(in Chinese)
|
| [16] |
张美红,王志栋.CFD技术在带动力飞机气动设计中的应用[J].民用飞机设计与研究,2004(4):52-55. ZHANG Meihong,WANG Zhidong.The application of CFD in powered aircraft aerodynamic design[J].Civil Aircraft Design and Research,2004(4):52-55.(in Chinese)
|
| [17] |
李周复.风洞试验手册[M].北京:航空工业出版社,2015.
|
| [18] |
高翔,李密,李秋锋.翼吊短舱形式运输机进气道阻力特性分析方法研究[J].推进技术,2019,40(1):61-68.
|