| Citation: | CHEN Yong, FENG Zhanrong, SHENG Wei. Research on tooth surface design and undercutting of non-orthogonal arc tooth face-gears[J]. Journal of Aerospace Power, 2020, 35(5): 1081-1088. doi: 10.13224/j.cnki.jasp.2020.05.019
|
| [1] |
LITVIN F L,FUENTES A.Gear geometry and applied theory［M］.New York:Cambrige University Press,2004.
|
| [2] |
LITVIN F L,ZHANG Y,WANG J C.Design and geometry of face-gear drives［J］.Journal of Mechanical Desig,1992,114(4):642-647.
|
| [3] |
李政民卿,朱如鹏.正交面齿轮齿廓的几何设计和根切研究［J］.华南理工大学学报(自然科学版),2008(2):78-82. LI Zhengminqing,ZHU Rupeng.Investigatio into geometrical design of tooth profile and undercut for orthogonal face-gear［J］.Journal of South China University of Technology (Natural Science Edition),2008(2):78-82.(in Chinese)
|
| [4] |
朱如鹏,潘升材,高德平.正交面齿轮传动中齿宽设计的研究［J］.机械科学与技术,1999,18(4):54-55,57. ZHU Rupeng,PAN Shengcai,GAO Deping.Study of the design of tooth width of rigaht shaft-angle face-gear drive［J］.Mechanical Science and Technology for Aerospace Engineering,1999,18(4):54-55,57.(in Chinese)
|
| [5] |
王延忠,熊巍,张俐,等.面齿轮齿面方程及其轮齿接触分析［J］.机床与液压,2007,35(12):7-9,47. WANG Yanzhong,XIONG Wei,ZHANG Li,et al.Tooth surface equations and tooth contact analysis of face gear［J］.Machine Tool and Hydraulics,2007,35(12):7-9,47.(in Chinese)
|
| [6] |
彭先龙,郭卫.面齿轮制造技术综述及未来发展趋势［J］.制造技术与机床,2017(9):36-42. PENG Xianlong,GUO Wei.Research review and development trend of face gear manufacturing［J］.Manufacturing Technology and Machine Tool,2017(9):36-42.(in Chinese)
|
| [7] |
王延忠,唐文.基于球形滚刀的面齿轮滚齿加工方法［J］.北京航空航天大学学报,2017,43(3):441-448. WANG Yanzhong,TANG Wen.Hobbing method of face-gear based on spherical hob［J］.Journal of Beijing University of Aeronautics and Astronautics,2017,43(3):441-448.(in Chinese)
|
| [8] |
彭先龙,韩飞燕,乔心州,等.斜齿面齿轮传动齿面主动修形与边缘接触分析［EB/OL］.［2020-05-18］.http:∥kns.cnki.net/kcms/detail/11.5946.tp.20190531.0935.002.html.
|
| [9] |
沈云波,方宗德,赵宁.斜齿面齿轮齿宽的设计［J］.航空动力学报,2008,23(4):754-758. SHEN Yunbo,FANG Zongde,ZHAO Ning.The design of tooth face width of the face-gear drives with helical pinion［J］.Journal of Aerospace Power,2008,23(4):754-748.(in Chinese)
|
| [10] |
崔艳梅,方宗德,王丽萍.弧线齿面齿轮的根切与变尖研究［J］.机械强度,2014,36(4):572-577. CUI Yanmei,FANG Zongde,WANG Liping.Research on tooth face-gear with undercutting and pointing［J］.Journal of Mechanical Strength,2014,36(4):572-577.(in Chinese)
|
| [11] |
崔艳梅,方宗德,王星.考虑安装误差的弧线齿面齿轮承载接触分析［J］.机械传动,2015,39(8):115-118. CUI Yanmei,FANG Zongde,WANG Xing.Load tooth contact analysis for arc tooth face-gear considering assembly misalignment［J］.Journal of Mechanical Transmission,2015,39(8):115-118.(in Chinese)
|
| [12] |
CUI Yanmei,FANG Zongde,SU Jinzhan.Precise modeling of arc tooth face-gear with transition curve［J］.Chinese Journal of Aeronautics,2013,26(5):1346-1351.
|
| [13] |
李清,徐伟俊,张猛.飞刀法加工蜗杆面齿轮的理论研究与实践［J］.中国机械工程,2019,30(23):2835-2843. LI Qing,XU Weijun,ZHANG Meng.Theoretical research and practice of machining worm face-gears by flying cutter method［J］.China Mechanical Engineering,2019,30(23):2835-2843.(in Chinese)
|
| [14] |
盛伟,王利霞.弧线齿面齿轮齿面几何设计及径向齿宽特性［J］.航空动力学报,2019,34(4):796-803. SHENG Wei,WANG Lixia.Geometrical design of tooth surface and characteristics of radial tooth width for face-gear with arc tooth［J］.Journal of Aerospace Power,2019,34(4):796-803.(in Chinese)
|
| [15] |
张昆仑.非对称弧线圆柱齿轮设计与啮合特性研究［D］.西安:长安大学,2017. ZHANG Kunlun.Study on the design and meshing characteristics of the asymmetric curvilinear cylindrical gears［D］.Xi’an:Chang’an University,2017.(in Chinese)
|
| [16] |
苏进展,方宗德.弧线齿圆柱齿轮四阶传动误差设计与分析［J］.机械传动,2014,38(9):11-14,19. SU Jinzhan,FANG Zongde.Design and analysis of fourth order transmission error ofcirculararc curvilinear of cylindrical gear［J］.Journal of Mechanical Transmission,2014,38(9):11-14,19.(in Chinese)
|
| [17] |
常青林,侯力,孙志军.弧齿圆柱齿轮两种加工方法工艺分析［J］.机械传动,2014,38(6):96-100.
|
DownLoad: