| Citation: | ZHANG Busheng, ZHU Jizhi, SHI Jian. Test of vibration fatigue for the TiAl alloy aeroengine blade at high temperature and high cycle[J]. Journal of Aerospace Power, 2020, 35(6): 1169-1175. doi: 10.13224/j.cnki.jasp.2020.06.006
|
| [1] |
宋兆泓.航空发动机典型故障分析［M］.北京:北京航空航天大学出版社,1993.
|
| [2] |
李静,孙强,李春旺,等.某型航空发动机压气机叶片振动疲劳寿命研究［J］.应用力学学报,2011,28(2):189-193,217. LI Jing,SU Qiang,LI Chunwang,et al.Study on the vibration fatigue life for aero-engine compressor blade［J］.Chinese Journal of Applied Mechanics,2011,28(2):189-193,217.(in Chinese)
|
| [3] |
李全通,通旭东,高星伟,等.基于试片超高周疲劳试验的叶片高周疲劳寿命估算方法［J］.航空动力学报,2014,29(10):2471-2475. LI Quantong,TONG Xudong,GAO Xingwei,et al.Estimation method of blade high cycle fatigue life based on ultra-high cycle fatigue test of specimen［J］.Journal of Aerospcace Power,2014,29(10):2471-2475.(in Chinese)
|
| [4] |
何胜帅,陈立伟,强笑辉,等.航空发动机叶片高应力振动疲劳试验技术研究［J］.装备环境工程,2013,10(4):41-46. HE Shengshuai,CHEN Liwei,QIANG Xiaohui,et al.High stress vibration fatigue test technology of aeroengine blade［J］.Equipment Environmental Engineering,2013,10(4):41-46.(in Chinese)
|
| [5] |
杨强,邵闯,方可强.航空发动机复合材料叶片振动疲劳特性研究［J］.实验力学,2014,29(3):361-367. YANG Qiang,SHAO Chuang,FANG Keqiang.Vibration fatigue characteristic study of aeroengine composite blade［J］.Journal of Experimental Mechanics,2014,29(3):361-367.(in Chinese)
|
| [6] |
唐铃,尚柏林,高星伟,等.某型发动机风扇叶片振动应力监控方法［J］.噪声与振动控制,2016,36(4):206-209,216. TANG Ling,SHANG Bolin,GAO Xingwei,et al.Method for vibration stress monitoring of engine fan blades［J］.Noise and Vibration Control,2016,36(4):206-209,216.(in Chinese)
|
| [7] |
胡安辉,马康民.某型航空发动机压气机四级转子叶片振动特性分析［J］.失效分析与预防,2006(4):10-12. HU Anhui,MA Kangmin.Investigation on vibration characteristics of 4th compressor blades in aero-engine［J］.Failure Analysis and Prevention,2006(4):10-12.(in Chinese)
|
| [8] |
李锋,何宇廷,李鸿鹏,等.某型航空发动机压气机四级转子叶片失效分析［J］.材料工程,2006(增刊1):382-384. LI Feng,HE Yuting,LI Hongpeng.Failure analysis for compressor blade of the fourth stage in an aero-engine［J］.Journal of Materials Engineering,2006(Suppl.1):382-384.(in Chinese)
|
| [9] |
李晓莹.传感器与测试技术［M］.北京:高等教育出版社,2004.
|
| [10] |
张忠平,孙强,李春旺,等.航空发动机压气机叶片振动疲劳寿命与af值的关系［J］.应用力学学报,2006,23(3):459-461,514. ZHANG Zhongpin,SUN Qiang,LI Chunwang,et al.The relationship between aeroengine compressor blade fatigue life and af value［J］.Chinese Journal of Applied Mechanics,2006,23(3):459-461,514.(in Chinese)
|
| [11] |
焦胜博,程礼,陈煊,等.Ti-6Al-4V钛合金振动弯曲超高周疲劳及寿命预测模型研究［J］.实验力学,2016,31(6):730-740. JIAO Shengbo,CHENG Li,CHEN Xuan,et al.On the very high cycle fatigue and life prediction model of Ti-6Al-4V titanium alloy subjected to vibration bending［J］.Journal of Experimental Mechanics,2016,31(6):730-740.(in Chinese)
|
| [12] |
尹福炎.高温/低温电阻应变片及其应用［M］.北京:国防工业出版社,2014.
|
| [13] |
许正功,陈宗帖,黄龙发.表面形变强化技术的研究现状［J］.装备制造技术,2007(4):69-71,75. XU Zhenggong,CHEN Zongtie,HUANG Longfa.Research on the outline of strengthening technology of surface deformation［J］.Equipment Manufacture Technology,2007(4):69-71,75.(in Chinese)
|
| [14] |
刘阳春.方兴未艾的喷丸强化处理新技术［J］.世界产品与技术,1997(2):10-11. LIU Chunyang.The new technology of shot penning［J］.The World Production and Technology,1997(2):10-11.(in Chinese)
|
| [15] |
中华人民共和国航空工业部.发动机叶片及材料振动疲劳试验方法:HB 5277-1984［S］.北京:国防科学技术工业委员会,1986:288-296.
|
| [16] |
高雄兵,何凌川,于进学,等.一种降低叶片高周疲劳实验件频率的配重块连接结构:CN103728111A［P］.2014-04-16.
|
| [17] |
姚春斌,李杰,朱正邦.一种发动机叶片高应力振动疲劳实验技术研究:CN206177542U［P］.2017-05-17.
|
| [18] |
姚春斌,李杰,张部声.放大夹具在整体叶轮叶片振动疲劳实验中的应用［J］.环境技术,2018,36(3):11-16. YAO Chunbin,LI Jie,ZHANG Busheng.Application of magnified fixture in vibration fatigue test of integral impeller blade［J］.Environmental Testing,2018,36(3):11-16.(in Chinese)
|
DownLoad: