Volume 35 Issue 9
Sep.  2020
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2020  >  35(9): 1812-1821
GAO Zhao, LIU Yuying, GU Pengcheng. Model of spatial SMD distribution of spray at the near-field of swirl cup[J]. Journal of Aerospace Power, 2020, 35(9): 1812-1821. doi: 10.13224/j.cnki.jasp.2020.09.003
Citation: GAO Zhao, LIU Yuying, GU Pengcheng. Model of spatial SMD distribution of spray at the near-field of swirl cup[J]. Journal of Aerospace Power, 2020, 35(9): 1812-1821. doi: 10.13224/j.cnki.jasp.2020.09.003
shu

Model of spatial SMD distribution of spray at the near-field of swirl cup

doi: 10.13224/j.cnki.jasp.2020.09.003

  • School of Energy and Power Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China

  • Received Date: 2020-02-09
  • Publish Date: 2020-09-28
    Abstract
  • A semi-empirical model of spatial SMD distribution at the near-field of swirl cup was proposed based on the physical process of swirl cup atomization and the characteristics of spatial Sauter mean diameter (SMD) distribution. The swirl cup spray at the near-field was divided into central zone and border zone, the hybrid atomization model of pressure swirl with primary air blast atomizer was used for the central zone, and the prefilming airblast atomization model of Ventruri tube was used for the border zone spray. The SMD and SMD spatial distributions of the spray were combined with Gaussian distribution simultaneously. According to the difference of air pressure drop, two types of semi-empirical models: pressure swirl atomization dominated model and airblast atomization dominated model, were validated respectively. Furthermore, the influences of liquid pressure and air pressure drop on the spatial SMD distribution were predicted and analyzed. Pediction results show that: the SMD decrease with the increase of liquid pressure or air pressure drop.

     

    • FullText(HTML)
  • loading
    • References(28)
  • [1]
    LEFEBVRE A H.Gas turbine combustion［M］.Boca Raton，US：CRC Press,1998.
    [2]
    金如山.航空燃气轮机燃烧室［M］.北京:宇航出版社,1988.
    [3]
    甘晓华.航空燃气轮机燃油喷嘴技术［M］.北京:国防工业出版社,2006.
    [4]
    LIU C,LIU F,YANG J,et al.Investigations of the effects of spray characteristics on the flame pattern and combustion stability of a swirl-cup combustor［J］.Fuel Guildford,2015,139:529-536.
    [5]
    JENG S M,FLOHRE N M,MONGIA H.Swirl cup modeling-atomization［R］.AIAA-2004-137,2004.
    [6]
    FLOHRE N.Experimental of spray atomization properties of an aircraft engine swirl cup［D］.Cincinnati,US:University of Cincinnati,2003.
    [7]
    JENG S M,FLOHRE N,MONGIA H.Air temperature effects on non-reacting spray characteristics issued from a counter-rotating swirler［R］.AIAA-2005-355,2005.
    [8]
    JENG S M,FLOHRE N,MONGIA H.Fluid property effects on non-reacting spray characteristics issued from a counter-rotating swirler［R］.AIAA-2005-356,2005.
    [9]
    GIRIDHARAN M,MONGIA H,JENG S M.Swirl cup modeling:Part Ⅷ spray combustion in cfm-56 single-cup flame tube［R］.AIAA-2003-319,2003.
    [10]
    SHANMUGADAS K P,CHAKRAVARTHY S R,CHIRANTHAN R N,et al.Characterization of wall filming and atomization inside a gas-turbine swirl injector［J］.Experiments in Fluids,2018,59(10):1-26.
    [11]
    WANG H Y,MCDONELL V G,SAMUELSEN S.Influence of hardware design on the flow field structures and the patterns of droplet dispersion:Part Ⅰ mean quantities［J］.Journal of Engineering for Gas Turbines and Power,1995,117(2):282-289.
    [12]
    黄勇,郭志辉.某燃烧室头部旋流油雾场特性的实验研究［C］∥中国航空学会第五届动力年会论文集.北京:中国航空学会动力专业分会,2003:103-110.
    [13]
    郭新华,林宇震,张驰,等.离心式同向双旋流器空气雾化喷嘴雾化特性研究［J］.航空动力学报,2009,24(10):2249-2254.
    GUO Xinhua,LIN Yuzheng,ZHANG Chi,et al.Experimental investigation on atomization characteristic of an air blast atomizer with centrifugal nozzle and co-dual-swirl cup［J］.Journal of Aerospace Powe,2009,24(10):2249-2254.(in Chinese)
    [14]
    HAN Y M,SEOL W S,LEE D S,et al.Effects of fuel nozzle displacement on pre-filming airblast atomization［J］.Journal of Engineering for Gas Turbines and Power,2001,123(1):33-40.
    [15]
    WANG H,MCDONELL V,SAMUELSEN G.The influence of spray angle on the continuous-and discrete-phase flowfield downstream of an engine combustor swirl cup［R］.AIAA-92-3231,1992.
    [16]
    ATESHKADI A,MCDONELL V,SAMUELSEN G.Effect of mixer geometry on fuel spray distribution,emissions and stability［R］.AIAA-98-0247,1998.
    [17]
    WANG X,LIN Y,HU H,et al.Effect of swirl cup’s venturi shape on spray structure and ignition process［R］.ASME Paper 2014-GT-25216,2014.
    [18]
    CHIN J S,RIZK N K,RAZDAN M K.Effect of inner and outer airflow characteristics on high liquid pressure prefilming airblast atomization［J］.Journal of Propulsion and Power,2000,16(2):297-301.
    [19]
    RIZKALLA A A,LEFEBVRE A H.The influence of air and liquid properties on airblast atomization［J］.Journal of Fluids Engineering,1975,97(3):316-320.
    [20]
    EL-SHANAWANY M S,LEFEBVRE A H.Airblast atomization:effect of linear scale on mean drop size［J］.Journal of Energy,1980,4(4):184-189.
    [21]
    LEFEBVRE A H.Twin-fluid atomization:factors influencing mean drop size［J］.Atomization and Sprays,1992,2(2):101-119.
    [22]
    KULKARNI A P,DESHMUKH D.Spatial drop-sizing in airblast atomization-an experimental study［J］.Atomization and Sprays,2017,27(11):949-961.
    [23]
    LEFEBVRE A H.Energy considerations in twin-fluid atomization［R］.ASME Paper 90-GT-003,1997.
    [24]
    BATARSEH F Z M.Spray generated by an airblast atomizer:atomization,propagation and aerodynamic instability［D］.Darmstadt,Germany:Technische Universitt Darmstadt,2009.
    [25]
    BARARSEH F Z,ROISMAN I V,TROPEA C.Characterization of a spray generated by an airblast atomizer with prefilmer［J］.Atomization and Sprays,2010,20(10):887-903.
    [26]
    HOLZ S,CHAUSSONNET G,GEPPERTH S,et al.Comparison of the primary atomization model PAMELA with drop size distributions of an industrial prefilming airblast nozzle［R］.Brighton,UK:International Conference for Liquid Atomization and Spray Systems (ILASS),2016.
    [27]
    HAN Y M,YOON M S,SEOL W S,et al.An experimental study on modeling of fuel atomization for simulating the idle regime of a gas turbine combustor by atmospheric testing［R］.ASME Paper 97-GT-152,1997.
    [28]
    RIZK N,MONGIA H.Performance of hybrid airblast atomizers under low power conditions［R］.AIAA-92-0463,1992.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(2576.0KB)
    XML

    Article Metrics

    Article views (383) PDF downloads(434) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return