| Citation: | GAO Limin, WANG Haoha, ZHAO Lei. Effect of unilateral blade tip fillet structure on blade tip clearance flow of compressor cascade[J]. Journal of Aerospace Power, 2020, 35(9): 1927-1935. doi: 10.13224/j.cnki.jasp.2020.09.015
|
| [1] |
陈懋章,刘宝杰.风扇/压气机气动设计技术发展趋势:用于大型客机的大涵道比涡扇发动机［J］.航空动力学报,2008,23(6):961-975. CHEN Maozhang,LIU Baojie.Fan/compressor aero design trend and challenge on the development of high bypass ratio turbofan［J］.Journal of Aerospace Power,2008,23(6):961-975.(in Chinese)
|
| [2] |
WISLER D C.Loss reduction in axial-flow compressors through low-speed model testing［J］.Journal of Engineering for Gas Turbines and Power,1985,107(2):354-363.
|
| [3] |
SUDER K L.Blockage development in a transonic,axial compressor rotor［J］.Journal of Turbomachinery,1998,120(3):465-476.
|
| [4] |
WILLIAMS R,DAVID G S,HE Li,et al.Experiments and computations on large tip clearance effects in a linear cascade［J］.Journal of Turbomachinery,2010,132(2):021018.1-021018.10.
|
| [5] |
GOURDAIN N,FRANCIS L.Unsteady simulation of an axial compressor stage with casing and blade passive treatments［J］.Journal of Turbomachinery,2009,131(2):021013.1-021013.12.
|
| [6] |
WANG Z,JIA X,CAI R.Influence of blade tip clearance shapes on aerodynamic performance of an axial flow compressor stator［J］.Journal of Power and Energy,2002,216(5):395-401.
|
| [7] |
ZHONG Jingjun,HAN Shaobing,LU Huawei,et al.Effect of tip geometry and tip clearance on aerodynamic performance of a linear compressor cascade［J］.Chinese Journal of Aeronautics,2013,26(3):583-593.
|
| [8] |
MA Hongwei,LI Baihe.Effects of axial non-uniform tip clearances on aerodynamic performance of a transonic axial compressor［J］.Journal of Thermal Science,2008,17(4):331-336.
|
| [9] |
MA Hongwei,ZHANG Jinghui,ZHANG Jun.Experimental study of effects of one kind of tangentially non-uniform tip clearance on the flow field at an exit of a compressor cascade passage［J］.Journal of Thermal Science,2010,19(1):7-13.
|
| [10] |
高丽敏,刘思余,李永增,等.扩压叶栅叶顶间隙流动结构研究［J］.工程热物理学报,2020,41(2):329-334. GAO Limin,LIU Siyu,LI Yongzeng,et al.Investigation of the structure of cascade tip clearance flow field［J］.Journal of Engineering Thermophysics,2020,41(2):329-334.(in Chinese)
|
| [11] |
KANG S,HIRSCH C.Experimental study on the three-dimensional flow within a compressor cascade with tip clearance:Part I velocity and pressure fields［R］.ASME Paper 92-GT-215,1992.
|
| [12] |
KANG S,HIRSCH C.Experimental study on the three-dimensional flow within a compressor cascade with tip clearance:Part Ⅱ the tip leakage vortex［R］.ASME Paper 92-GT-432,1992.
|
| [13] |
RAINS D A.Tip clearance flows in axial flow compressors and pumps［D］.Pasadena,US:California Institute of Technology,1954.
|
| [14] |
MOORE J,TILTON J S.Tip leakage flow in a linear turbine cascade［J］.Journal of Turbomachinery,1988,110(1):18-26.
|
| [15] |
李萍.叶片加工误差及数据传递对压气机气动性能的影响［D］.西安:西北工业大学,2015. LI Ping.Effect of blade machining error and data transfer on compressor aerodynamic performance［D］.Xi’an:Northwestern Polytechnical University,2015.(in Chinese)
|
| [16] |
高丽敏,蔡宇桐,徐浩亮,等.压气机叶片加工误差影响不确定分析［J］.航空动力学报,2017,32(9):2253-2259. GAO Limin,CAI Yutong,XU Haoliang,et al.Uncertainty quantification of airfoil considering manufacturing error［J］.Journal of Aerospace Power,2017,32(9):2253-2259.(in Chinese)
|
| [17] |
HUNT J C R.Eddies stream,and convergence zones in turbulent flows［R］.Center for Turbulence Research N89-24555,1988.
|
| [18] |
XIAO X,MCCARTER A A,LAKSHMINARAYANA B,et al.Tip clearance effects in a turbine rotor:Part Ⅰ pressure field and loss［J］.Journal of Turbomachinery,2001,123(2):296-304.
|
| [19] |
XIAO X,MCCARTER A A,LAKSHMINARAYANA B,et al.Tip clearance effects in a turbine rotor:Part Ⅱ velocity field and flow physics［J］.Journal of Turbomachinery,2001,123(2):305-313.
|
DownLoad: