| Citation: | LIU Meiru, TENG Guangrong, XIAO Xiao. Vibration measurement of turbine rotor blades of aero-engine based on blade tip-timing[J]. Journal of Aerospace Power, 2020, 35(9): 1954-1963. doi: 10.13224/j.cnki.jasp.2020.09.018
|
| [1] |
彭建,刘兵.压气机转子叶片动频动应力测试技术和应用研究［J］.燃气涡轮试验与研究,2003,16(1):10-13. PENG Jian,LIU Bing.Application research on vibration frequency and stress instrumentation of compressor rotor blades［J］.Gas Turbine Experiment and Research,2003,16(1):10-13.(in Chinese)
|
| [2] |
王奉明,朱俊强,徐纲.基于整机试车的涡轮叶片高低循环复合疲劳试验技术［J］.航空动力学报,2018,33(10):2343-2350. WANG Fengming,ZHU Junqiang,Xu Gang.Test method for the combined high and low cycle fatigues of turbine blade based on the whole engine operation［J］.Journal of Aerospace Power,2018 33(10):2343-2350.(in Chinese)
|
| [3] |
方志强.涡轮机叶片振动非接触检测原理及应用技术研究［D］.天津:天津大学,2007. FANG Zhiqiang.The research of non-contact measurement technique of rotating blade vibration［D］.Tianjin:Tianjin University,2007.(in Chinese)
|
| [4] |
STANDARD M.Engine structural integrity program (ENSIP) in MlL-STD-1783［R］.Washington DC:Department of U.S.Defense,2002.
|
| [5] |
JOUSSELIN O.Development of blade tiptiming techniques in turbo machinery［D］.Manchester,UK:the University of Manchester,2013.
|
| [6] |
ZIELINSKI M,ZILLER G.Noncontact crack detection on compressor rotor blades to prevent further damage after HCF-Failure［R］.Granada,Spain:The Symposium of Evaluation,Control and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land,Sea and Air Vehicles,2005.
|
| [7] |
钟志才,滕光蓉,陈香,等.风扇转子叶片的非接触振动测量［J］.燃气涡轮试验与研究,2011,24(4):44-47. ZHONG Zhicai,TENG Guangrong,CHEN Xiang,et al.Non-contact vibration measuring system used for fan rotor blades［J］.Gas Turbine Experiment and Research,2011,24(4):44-47.(in Chinese)
|
| [8] |
钟志才,范志强,李光辉,等.叶尖定时振动测量系统及其在某模拟试验件上的应用［J］.燃气涡轮试验与研究,2008,21(4):42-45. ZHONG Zhicai,FAN Zhiqiang,LI Guanghui,et al.Blade tip-timing vibration system and application to simulation rotary sample［J］.Gas Turbine Experiment and Research,2008,21(4):42-45.(in Chinese)
|
| [9] |
刘美茹,朱靖,滕光蓉,等.非接触振动测试系统在航空发动机转子叶片振动测试中的应用［J］.燃气涡轮试验与研究,2015,28(2):45-48. LIU Meiru,ZHU Jing,TENG Guangrong,et al.The application of non-contact vibration measurement system on the rotor blade vibration measurement of aero-engine［J］.Gas Turbine Experiment and Research,2015,28(2):45-48.(in Chinese)
|
| [10] |
刘美茹,朱靖,梁恩波,等.叶尖定时的航空发动机压气机叶片振动测量［J］.航空动力学报,2019,34(9):1895-1904. LIU Meiru,ZHU Jing,LIANG Enbo,et al.Vibration measurement on compressor rotor blades of aero-engine based on tip-timing［J］.Journal of Aerospace Power,2019,34(9):1895-1904.(in Chinese)
|
| [11] |
欧阳涛.基于叶尖定时的旋转叶片振动检测及参数辨识技术［D］.天津:天津大学,2011. OUYANG Tao.Rotating blade vibration detection and parameters identification technique using blade tip-timing［D］.Tianjin:Tianjin University,2011.(in Chinese)
|
| [12] |
张玉贵,.气轮机叶片振动的非接触式在线监测关键技术研究［D］.天津:天津大学,2008. ZHANG Yugui.Key technology research on non-contact online monitoring for fume turbine blade vibration［D］.Tianjin:Tianjin University,2008.(in Chinese)
|
| [13] |
冯军楠,段发阶,叶德超,等.一种耐高温光纤式叶尖定时传感器及验证装置［J］.纳米技术与精密工程,2016,14(3):167-172. FENG Junnan,DUAN Fajie,YE Dechao,et al.An optical fiber tip-timing sensor with high temperature resistant capacity and testing device［J］.Nanotechnology and Precision Engineering,2016,14(3):167-172.(in Chinese)
|
| [14] |
欧阳涛,郭文力,段发阶,等.基于叶尖定时的旋转叶片同步振动辨识新方法［J］.振动与冲击,2011,30(8):249-252,257. OUYANG Tao,GUO Wenli,DUAN Fajie,et al.New method for identifying rotating blades synchronous vibration based on tip-timing［J］.Journal of Vibration and Shock,2011,30(8):249-252,257.(in Chinese)
|
| [15] |
屈维,王维民,陈立芳.裂纹参数对汽轮机叶片振动特性影响研究［J］.北京化工大学学报(自然科学版),2016,43(1):78-85. QU Wei,WANG Weimin,CHEN Lifang.The influence of crack parameters on the vibration characteristics of steam turbine blades［J］.Journal of Beijing University of Chemical Technology (Natural Science),2016,43(1):78-85.(in Chinese)
|
| [16] |
王维民,任三群,陈立芳,等.涡轮机叶片同步振动参数辨识方法研究(建模仿真)［J］.振动与冲击,2017,36(17):120-126. WANG Weimin,REN Sanqun,CHEN Lifang,et al.Synchronous vibration parametric identification method for blades of a turbine［J］.Journal of Vibration and Shock,2017,36(17):120-126.(in Chinese)
|
| [17] |
王维民,任三群,陈立芳,等.涡轮机叶片同步振动参数辨识方法研究(实验研究)［J］.振动与冲击,2017,36(17):127-133. WANG Weimin,REN Sanqun,CHEN Lifang,et al.Tests for synchronous vibration parametric identification method of a turbine’s blades［J］.Journal of Vibration and Shock,2017,36(17):127-133.(in Chinese)
|
| [18] |
CHEN Z,YANG Y,XIE Y,et al.Non-contact crack detection of high-speed blades based on principal component analysis and Euclidian angles using optical-fiber sensors［J］.Sensors and Actuators:A Physical,2013,201(1):66-72.
|
| [19] |
RIGOSI G,BATTIATO G,BERRUTI T M.Synchronous vibration parameters identification by tip timing measurements［J］.Mechanics Research Communications,2017,79(1):7-14.
|
| [20] |
欧阳涛,段发阶,李孟麟,等.旋转叶片异步振动全相位FFT辨识方法［J］.振动工程学报,2011,24(3):268-273. OUYANG Tao,DUAN Fajie,LI Menglin,et al.A method for identifying rotating blade asynchronous vibration by all-phase FFT［J］.Journal of Vibration Engineering,2011,24(3):268-273.(in Chinese)
|
| [21] |
LIN J,HU Z,CHEN Z,et al.Sparse reconstruction of blade tip-timing signals for multi-mode blade vibration monitoring［J］.Mechanical Systems and Signal Processing,2016,81:250-258.
|
| [22] |
DIAMOND D H,HEYNS P S.A novel method for the design of proximity sensor configuration for rotor blade tip timing［J］.Journal of Vibration and Acoustics,2018,140(6):8061003.1-8061003.8.
|
| [23] |
胡伟,王德友,杜少辉,等.非接触式数字光纤叶片测振系统研究及应用［J］.航空发动机,2010,36(1):37-41. HU Wei,WANG Deyou,DU Shaohui,et al.Investigation and application of non-contact digital optical fiber rotor blade vibration measurement system［J］.Aeroengine,2010,36(1):37-41.(in Chinese)
|
| [24] |
敖春燕,乔百杰,刘美茹,等.基于非接触式测量的旋转叶片动应变重构方法［J］.航空动力学报,2020,35(3):569-580.
|
DownLoad: