| Citation: | LONG Yongsheng, ZHU Xinxin, YUAN Jie. Comparative analysis on methods for contact testing total enthalpy of high temperature and high speed flow[J]. Journal of Aerospace Power, 2020, 35(10): 2028-2035. doi: 10.13224/j.cnki.jasp.2020.10.002
|
| [1] |
PARK C,RAICHE G A,DRIVER D M.Comparison of enthalpy determination methods for arc-jet facility［J］.Journal of Thermophysics and Heat Transfer,2015,20(4):672-679.
|
| [2] |
MAKOTO M,KIMYA K,GEORG H.Enthalpy measurement in inductively heated plasma generator flow by laser absorption spectroscopy［J］.AIAA Journal,2005,43(9):2060-2064.
|
| [3] |
MAKOTO M,KIMYA K,YOSHIHIRO A.Enthalpy measurement of inductively heated airflow［J］.Journal of Spacecraft and Rockets,2008,45(1):155-157.
|
| [4] |
MICHAEL W,CIDAMBI S,RICHARD C.Non-equilibrium analysis of emission spectroscopy data taken in the freestream of the NASA IHF arc jet facility［R］.AIAA 2015-2963,2015.
|
| [5] |
DONALDSON J,COULTER S.A review of free-stream flow fluctuation and steady-state flow quality measurement in the AEDC/VKF supersonic tunnel A and hypersonic tunnel B［R］.AIAA-95-6137,1995.
|
| [6] |
PIN O,BADIE J M,OLALDE G.Temperature diagnostics in the hypersonic flow regime:an application to develop a stagnation temperature probe［R］.AIAA-95-6114,1995.
|
| [7] |
PIN O,BADIE J M,OLALDE G.Development of a stagnation temperature for air-hydrogen supersonic combustion flows［J］.High Temperatures-High Pressures,2013,27/28(4):429-434.
|
| [8] |
GAUS R,BAR K.Investigations concerning temperature measurement and calibration purpose up to 2000°C［R］ AIAA-93-5136,2013.
|
| [9] |
FAY J A,RIDDELL F R.Theory of stagnation point heat transfer in dissociated air［J］.Journal of the Aeronautical Sciences,1958,25(2):73-85.
|
| [10] |
CONLEY H L.Enthalpy measurement in the rent facility using the AEDC transient enthalpy probe［R］.Houston:Air Force Flight Dynamics Laboratory,1974.
|
| [11] |
戚隆溪,王柏懿.高温气流总焓的测量及微型瞬时探针的研制［J］.流动力学实验与测量,1997,11(1):70-76.QI Longxi,WANG Boyi.Measurement methods and miniature probe for total enthalpy of high-temperature gas streams［J］.Experiments and Measurements in Fluid Mechanics,1997,11(1):70-76.(in Chinese)
|
| [12] |
STEFANOS F,THOMAS S,MONIKA A K.Measurement of specific enthalpy in plasma wind tunnels using a mass injection probe［R］.AIAA 97-2496,1997.
|
| [13] |
STEFAN L,ANDREAS S,STEFANOS F.Local mass-specific enthalpy measurements with a new massinjection probe［J］.Journal of Thermophysics and Heat Transfer,2016,30(2):301-307.
|
| [14] |
RAHMANE M,GERVAIS S,BOULOS M I.Analysis of the enthalpy probe technique for thermal plasma diagnostics［J］.Review of Scientific Instruments,1995,66(6):3424-3431.
|
| [15] |
赵太泽,王飞,郭少峰,等.快速焓探针［J］.物理学报,2007,56(10):5952-5957.
ZHAO Taize,WANG Fei,GUO Shaofeng.Rapid enthalpy probe［J］.Journal of Physics,2007,56(10):5952-5957.(in Chinese) |
| [16] |
FENG Xiaozhen.Enthalpy probe technique for thermal plasma diagnostics［J］.Plasma Science and Technology,2003,5(4):1909-1914.
|
| [17] |
GREY J,JACOBS P F,SHERMAN M P.Calorimetric probe for the measurement of extremely high temperatures［J］.Review of Entific Instruments,1962,33(7):738-741.
|
| [18] |
SWANK W D,FINCKE J R,HAGGARD D C.Modular enthalpy probe and gas analyzer for thermal plasma measurements［J］.Review of Entific Instruments,1993,64(1):56-62.
|
| [19] |
DESIGNATION E.Standard test method for calculation of stagnation enthalpy from heat transfer theory and experimental measurements of stagnation-point heat transfer and pressure［R］.Philadelphia:American Society for Testing and Materials,2005.
|
| [20] |
CARNAHAN K R,HARTMAN G J,NEUNER G J.Development of TPS flight test and operational instrumentation［R］.NASA-CR-147845,1975.
|
| [21] |
SCHULTZ D L,JONES T V.Heat-transfer measurements in short-duration hypersonic facilities［R］.Advisory Group for Aeronau-tical Research and Development,AGARD-AG-165,1973.
|
| [22] |
American Society of Testing Materials.Standard test method for measuring extreme heat-transfer rates from high-energy environments using a transient,null-point calorimeter［R］.Philadelphia:American Society for Testing and Materials,1996.
|
| [23] |
American Society of Testing Materials.Standard test method form measuring heat-transfer rate using a thermal capacitance (slug) calorimeter［R］.American Society for Testing and Materials,ASTM-E457-08,2008.
|
| [24] |
MARK S D.The design and use of calorimeters for characterization of high enthalpy flows in arc-heated test facilities［R］.AIAA 2002-5236,2002.
|
| [25] |
朱新新,杨庆涛,王辉,等.塞块式量热计隔热结构的改进与试验分析［J］.实验流体力学,2018,32(6):36-42.
ZHU Xinxin,YANG Qingtao,WANG Hui,et al.Improvement of heat insulation structure in the slag calorimeter and test analysis［J］.Journal of Experiments in Fluid Mechanics,2018,32(6):36-42.(in Chinese) |
| [26] |
朱新新,王辉,杨庆涛,等.弧光灯热流标定系统的光学设计［J］.光学学报,2016(11):234-240.
ZHU Xinxin,WANG Hui,YANG Qingtao,et al.Optical design of arc lamp heat flux calibration system［J］.Acta Optica Sinica,2016(11):234-240.(in Chinese) |
DownLoad: