Volume 35 Issue 10
Oct.  2020
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aerospace Power  > 2020  >  35(10): 2223-2234
WANG Kai, LEI Fanpei, YANG Anlong. Prediction model of leakage rate of liquid sheet in pintle injector[J]. Journal of Aerospace Power, 2020, 35(10): 2223-2234. doi: 10.13224/j.cnki.jasp.2020.10.023
Citation: WANG Kai, LEI Fanpei, YANG Anlong. Prediction model of leakage rate of liquid sheet in pintle injector[J]. Journal of Aerospace Power, 2020, 35(10): 2223-2234. doi: 10.13224/j.cnki.jasp.2020.10.023
shu

Prediction model of leakage rate of liquid sheet in pintle injector

doi: 10.13224/j.cnki.jasp.2020.10.023
  • 1.

    Key Laboratory for Liquid Rocket Engine Technology,Xi’an Aerospace Propulsion Institute,China Aerospace Science and Technology Corporation,Xi’an 710100,China

  • 2.

    China State Shipbuilding Corporation Limited,Beijing 100044,China

  • Received Date: 2020-03-29
  • Publish Date: 2020-10-28
    Abstract
  • In order to predict accurately the leakage rate of liquid sheet in pintle injector,the relative deformation models of a liquid sheet and a liquid jet were established,based on the analysis of a spray field structure of a pintle injector element,and by combining with three methods of theoretical derivation,numerical simulation and experimental research. Taking the deformation of liquid sheet and liquid jet into consideration,the models of actual blocking rate and actual leakage rate were established for the first time by introducing coefficient of interaction to characterize the interaction between multi-injector units. Through multi-parameter verification of the numerical simulation and experimental data,the results showed that the predicted values of theoretical model were consistent with the numerical simulation and experimental data. Under the interaction of liquid sheet and liquid jet,the main causes of the deformation of liquid sheet and liquid jet were respectively a flow of liquid sheet around liquid jet and a transverse broadening of the root section caused by an asynchronous movement of the position of the front and rear edges at the root of liquid jet. Besides,the larger effective momentum ratio meant the greater relative deformation of liquid sheet and the smaller relative deformation of liquid jet. For the geometry structure with a certain blocking rate,the results showed that the leakage rate increased with the increase of the effective momentum ratio,and the increasing trend was fast first and then slow. The actual leakage rate was less than the geometric leakage rate,because the actual blocking rate was larger than the geometric blocking rate due to the deformation of liquid sheet and liquid jet. In addition,it was found that the leakage rate was only related to the dimensionless parameters characterizing the flow field structure (effective momentum ratio) and the geometry structure (ratio of sheet thickness to jet diameter and blocking rate),independent of the absolute value of injection velocity. The constant coefficients in the model were given for the engineering design prediction,providing an important guiding significance for considering the thermal protection of pintle tip in the early stage of design.

     

    • FullText(HTML)
  • loading
    • References(24)
  • [1]
    LEE S,KIM D,KOO J,et al.Spray characteristics of a pintle injector based on annular orifice area［J］.Acta Astronautica,2020,167:201-211.
    [2]
    ELVERUM G W,Jr,STAUDHAMMER P,et al.The descent engine for the lunar module［R］.Washington D C:the 3rd Propulsion Joint Specialist Conference,1967.
    [3]
    GILROY R,SACKHEIM R.The lunar module descent engine a historical summary［R］.AIAA 89-2385,1989.
    [4]
    袁宇.猎鹰火箭发动机设计特点［J］.太空探索,2017(7):19-20. YUAN Yu.Design features of falcon rocket engine［J］.Space Exploration,2017(7):19-20.(in Chinese)
    [5]
    张雪松.猎鹰火箭的基础:不断升级的梅林发动机［J］.卫星与网络,2017(6):40-41. ZHANG Xuesong.Foundation of falcon rocket:upgrading Merlin engine［J］.Satellite and Network,2017(6):40-41.(in Chinese)
    [6]
    安鹏,姚世强,王京丽,等.针栓式喷注器的特点及设计方法［J］.导弹与航天运载技术,2016(3):50-54. AN Peng,YAO Shiqiang,WANG Jingli,et al.Characteristics and design of pintle injector［J］.Missiles and Space Vehicles,2016(3):50-54.(in Chinese)
    [7]
    HEISTER S D.Pintle injectors,handbook of atomization and sprays:theory and applications［M］.New York:Springer,2011:647-655.
    [8]
    BOETTCHER P A,DAMAZO J S,SHEPHERD J E,et al.Visualization of transverse annular jets［R］.Minneapolis,Minnesota,USA:the 62nd Annual Meeting of the American Physical Society (APS) Division of Fluid Dynamic,2009.
    [9]
    刘昌波.针栓式喷注器雾化特性的多尺度仿真研究［D］.西安:西安航天动力研究所,2014. LIU Changbo.Multiscale simulations of primary atomization for the pintle injector［D］.Xi’an:Xi’an Aerospace Propulsion Institute,2014.(in Chinese)
    [10]
    王凯,雷凡培,杨岸龙,等.针栓式喷注单元膜束撞击雾化混合过程数值模拟［J］.航空学报,2020,41(9):123802.1-123802.15. WANG Kai,LEI Fanpei,YANG Anlong,et al.Numerical simulation on spray and mixing process of impingement between sheet and jet in pintle injector element［J］.Acta Aeronautica et Astronautica Sinica,2020,41(9):123802.1-123802.15.(in Chinese)
    [11]
    NINISH S,VAIDYANATHAN A,NANDAKUMAR K.Spray characteristics of liquid-liquid pintle injector［J］.Experimental Thermal and Fluid Science,2018,97:324-340.
    [12]
    成鹏.变推力火箭发动机喷雾燃烧动态过程研究［D］.长沙:国防科技大学,2018. CHENG Peng.The dynamics of spray combustion in variable thrust rocket engines［D］.Changsha:National University of Defense Technology,2018.(in Chinese)
    [13]
    李进贤,岳春国,侯晓,等.针栓式变推力火箭发动机内流场数值仿真研究［J］.计算机仿真,2009,26(8):49-52,88. LI Jinxian,YUE Chunguo,HOU Xiao,et al.Numerical simulation of inner flow field of a pintle injector variable thrust rocket engine［J］.Computer Simulation,2009,26(8):49-52,88.(in Chinese)
    [14]
    张连博,毛晓芳,汪凤山,等.针栓喷注式MMH/NTO推力室燃烧及传热数值仿真［J］.推进技术,2015,36(10):1487-1494. ZHANG Lianbo,MAO Xiaofang,WANG Fengshan,et al.Numerical simulation of pintle thruster combustion and heat transfer for MMH/NTO hypergolic bipropellant［J］.Journal of Propulsion Technology,2015,36(10):1487-1494.(in Chinese)
    [15]
    FANG X X,SHEN C B.Study on atomization and combustion characteristics of LOX/methane pintle injectors［J］.Acta Astronautica,2017,136:369-379.
    [16]
    KIM H,KANG H,KWON S.Liquid sheet-sheet impinging structure for pintle injector with nontoxic hypergolic bipropellant［J］.Journal of Propulsion and Power,2019,36(4):1-6.
    [17]
    SAKAKIV K,KAKUDO H,NAKAYA S,et al.Combustion characteristics of ethanol/liquid-oxygen rocket-engine combustor with planar pintle injector［J］.Journal of Propulsion and Power,2017,33(2):514-521.
    [18]
    VASQUES B,HAIDN O.Effect of pintle injector element geometry on combustion in a liquid oxygen/liquid methane rocket engine［R］.Gothenburg,Sweden:the 7th European Conference for Aeronautics and Aerospace Sciences (Eucass),2017.
    [19]
    MUELLER T.Pintle injector tip with active cooling:US 7503511B2［P］.2009-03-17.
    [20]
    WOO S S.Pintle-swirl hybrid injection device:US 10018361B2［P］.2018-07-10.
    [21]
    刘昌波,周立新,雷凡培.雾化过程的数值模拟研究综述［J］.火箭推进,2014,40(1):10-17. LIU Changbo,ZHOU Lixin,LEI Fanpei.Overview on numerical simulations of primary atomization［J］.Journal of Rocket Propulsion,2014,40(1):10-17.(in Chinese)
    [22]
    王凯,杨国华,李鹏飞,等.离心式喷嘴内部流动过程数值仿真分析［J］.火箭推进,2016,42(4):14-20. WANG Kai,YANG Guohua,LI Pengfei,et al.Numerical simulation of internal flow process in pressure swirl injector［J］.Journal of Rocket Propulsion,2016,42(4):14-20.(in Chinese)
    [23]
    王凯,雷凡培,李鹏飞,等.壁面边界对撞击合成动量角的影响研究［J］.推进技术,2019,40(10):2288-2295. WANG Kai,LEI Fanpei,LI Pengfei,et al.Effects of wall boundary on the resultant momentum angle of impinging jets［J］.Journal of Propulsion Technology,2019,40(10):2288-2295.(in Chinese)
    [24]
    王凯,雷凡培,张波涛,等.针栓式喷注器单元雾化角模型分析研究［J］.航空学报,2020,41(10):123622.1-123622.15.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF(4239.0KB)
    XML

    Article Metrics

    Article views (350) PDF downloads(276) Cited by()
    Proportional views
    Related

    Copyright © 《Journal of Aerospace Power》 All Rights Reserved.

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return