| Citation: | SU Zhishan, LI Huacong. Algorithm of “turning square into circle” for valve hole[J]. Journal of Aerospace Power, 2020, 35(10): 2235-2240. doi: 10.13224/j.cnki.jasp.2020.10.024
|
| [1] |
吴天翼,樊丁,杨帆,等.某型航空发动机FADEC系统设计与仿真［J］.科学技术与工程,2012,12(1):106-111. WU Tianyi,FAN Ding,YANG Fan,et al.Design and simulation of FADEC systemof one certain type aeroengine［J］.Science Technology and Engineering,2012,12(1):106-111.(in Chinese)
|
| [2] |
CALABRESE M A,SKARBEK L F,SHAH P H,et al.Using a digital fuel control system and digital engine controller for US Navy LM2500 engines［R］.ASME Paper GT2002-30272,2002.
|
| [3] |
王彬,赵皓岑,叶志锋.加力燃油计量装置的AMESim仿真研究［J］.航空发动机,2014,40(5):62-66. WANG Bin,ZHAO Haocen,YE Zhifeng.AMESim simulation of afterburning metering unit for fuel system［J］.Aeroengine,2014,40(5):62-66.(in Chinese)
|
| [4] |
薛梅新,吴迪,朴英.加力燃油泵压出室非设计工况内流特征数值模拟［J］.航空动力学报,2012,27(2):419-424. XUE Meixin,WU Di,PIAO Ying.Numerical simulation of flow characteristics in afterburning chamber of afterburner fuel pump under non design conditions［J］.Journal of Aerospace Power,2012,27(2):419-424.(in Chinese)
|
| [5] |
刘培培,马静,彭凯,等.基于AMESim的涡桨发动机燃油计量装置仿真［J］.机械制造,2011,49(8):19-21. LIU Peipei,MA Jing,PENG Kai,et al.Simulation of fuel metering device in turboprop engine based on AMESim［J］.Mechanical Manufacture,2011,49(8):19-21.(in Chinese)
|
| [6] |
徐敏,王曦,曾德堂,等.现代航空发动机液压机械控制器仿真研究［J］.航空动力学报,2009,24(12):2808-2813. XU Min,WANG Xi,ZENG Detang,et al.Simulation on hydromechanical controller of modern aeroengine［J］.Journal of Aerospace Power,2009,24(12):2808-2813.(in Chinese)
|
| [7] |
李阔,郭迎清.AMESim仿真技术在航空动力控制系统中的应用［J］.计算机仿真,2009,26(1):107-110. LI Kuo,GUO Yingqing.Application of AMESim in aeropower plant system［J］.Computer Simulation,2009,26(1):107-110.(in Chinese)
|
| [8] |
张恕森,王曦.燃油计量型孔几何正反设计方法研究［J］.航空发动机,2018,44(3):55-59. ZHANG Shusen,WANG Xi.Forward and reverse design method of fuel metering valve geometrical profile［J］.Aeroengine,2018,44(3):55-59.(in Chinese)
|
| [9] |
曾德堂,赵威力,王曦.回油型面结构对计量装置特性影响研究［J］.航空发动机,2012,38(1):41-42. ZENG Detang,ZHAO Weili,WANG Xi.Effects of fuel returned shape on metering devices characteristics［J］.Aeroengine,2012,38(1):41-42.(in Chinese)
|
| [10] |
曾德堂,王曦,覃道亮.燃油计量装置回油型面特性分析［J］.航空发动机,2010,36(6):22-25. ZENG Detang,WANG Xi,QIN Daoliang.Fuel scavenger contour performance analysis of fuel metering devices［J］.Aeroengine,2010,36(6):22-25.(in Chinese)
|
| [11] |
吴琪华,贺惠珠,张加桢.航空发动机调节［M］.北京:国防工业出版社,1986:39-40.
|
| [12] |
代志峰,杨晓冬.基于旋转电极的方孔电火花加工新方法［J］.电加工与模具,2017(4):52-55. DAI Zhifeng,YANG Xiaodong.A new EDM method for square hole with rotating electrode［J］.Electromachining and Mould,2017(4):52-55.(in Chinese)
|
| [13] |
傅宇蕾,朱颖谋,赵万生,等.微细电火花加工电极磨损几何形状研究及仿真［J］.电加工与模具,2016(1):6-9. FU Yulei,ZHU Yingmou,ZHAO Wansheng,et al.Geometry simulation and study on electrode tool wear in micro EDM［J］.Electromachining and Mould,2016(1):6-9.(in Chinese)
|
| [14] |
熊毅,邓晓.电火花成型电极磨损规律与电极修整技术的研究与应用［J］.现代制造工程,2016(10):94-98. XIONG Yi,DENG Xiao.Research and application of EDM electrode loss rules and electrode finishing technology［J］.Modern Manufacturing Engineering,2016(10):94-98.(in Chinese)
|
| [15] |
李德彦.电火花加工机床的操作安全技术［J］.安全,2011,32(6):40-41. LI Deyan.Operation safety technology of EDM machine tools［J］.Safety,2011,32(6):40-41.(in Chinese)
|
| [16] |
刘永红,李小朋,杜建华,等.电火花加工脉冲电源电磁兼容技术研究［J］.电加工与模具,2006(2):5-7. LIU Yonghong,LI Xiaopeng,DU Jianhua,et al.Study on the EMC technology of EDM pulse generator［J］.Electromachining and Mould,2006(2):5-7.(in Chinese)
|
| [17] |
狄士春,王弢,于滨,等.电火花加工脉冲电源研究现状与发展趋势［J］.航空精密制造技术,2002,38(4):15-18. DI Shichun,WANG Tao,YU Bin,et al.Research status and development trend of EDM pulse generator［J］.Aviation Precision Manufacturing Technology,2002,38(4):15-18.(in Chinese)
|
| [18] |
吴琪华,贺惠珠,张加桢.航空发动机调节［M］.北京:国防工业出版社,1986:267-269.
|
DownLoad: