| Citation: | MA Jianci, ZHOU Ling, JI Lucheng. Control of blade end slot on shock wave/boundary layer interaction of transonic cascade corner[J]. Journal of Aerospace Power, 2021, 36(7): 1377-1387. doi: 10.13224/j.cnki.jasp.20200428
|
| [1] |
HAH C,LOELLBACH J.Development of hub corner stall and its influence on the performance of axial compressor blade rows[J].Journal of Turbomachinery,1999,121(1):67-77.
|
| [2] |
FRIEDRICHS J,BAUMGARTEN S,KOSYNA G,et al.Effect of stator design on stator boundary layer flow in a highly loaded single-stage axial-flow low-speed compressor[R].ASME Paper 2000-GT-0616,2000.
|
| [3] |
GBADEBO S A,CUMPSTY N A,HYNES T P.Three-dimensional separations in axial compressors[J].Journal of Turbomachinery,2005,127(2):457-469.
|
| [4] |
WEBER A,SCHREIBER H A,FUCHS R,et al.3-D transonic flow in a compressor cascade with shock-induced corner stall[J].Journal of Turbomachinery,2002,124(3):358-366.
|
| [5] |
CULLEY D E,BRIGHT M M,PRAHST P S,et al.Active flow separation control of a stator vane using surface injection in a multistage compressor experiment[J].Journal of Turbomachinery,2004,126(1):24-34.
|
| [6] |
GBADEBO S A,CUMPSTY N A,HYNES T P.Control of three-dimensional separations in axial compressors by tailored boundary layer suction[J].Journal of Turbomachinery,2008,130(1):125-128.
|
| [7] |
LI Y H,WU Y,ZHOU M,et al.Control of the corner separation in a compressor cascade by steady and unsteady plasma aerodynamic actuation[J].Experiments in Fluids,2010,48(6):1015-1023.
|
| [8] |
DE GIORGI M G,DE LUCA C G,FICARELLA A,et al.Comparison between synthetic jets and continuous jets for active flow control:application on a NACA 0015 and a compressor stator cascade[J].Aerospace Science and Technology,2015,43:256-280.
|
| [9] |
MARCEL,STAATS,WOLFGANG,et al.Active control of the corner separation on a highly loaded compressor cascade with periodic nonsteady boundary conditions by means of fluidic actuators[J].Journal of Turbomachinery,2016,138(3):339-364.
|
| [10] |
HERGT A,MEYER R,ENGEL K.Experimental investigation of flow control in compressor cascades[R].ASME Paper GT2006-90415,2006.
|
| [11] |
HERGT A,MEYER R,MULLER M W,et al.Loss reduction in compressor cascades by means of passive flow control[R].ASME Paper GT2008-50357,2008.
|
| [12] |
HERGT A,MEYER R,ENGEL K.Effects of vortex generator application on the performance of a compressor cascade[J].Journal of Turbomachinery,2013,135(2):021026.1-021026.10.
|
| [13] |
LI J B,JI L C.Efficient design method for applying vortex generators in turbomachinery[J].Journal of Turbomachinery,2019,141(8):081005.1-081005.12.
|
| [14] |
李嘉宾,季路成,伊卫林.叶片通道内涡流发生器变工况适应性[J].航空动力学报,2019,34(3):728-736. LI Jiabin,JI Lucheng,YI Weilin.Load aptabillity of vortex generators in blad passage[J].Journal of Aerospace Power,2019,34(3):728-736.(in Chinese)
|
| [15] |
HOEGER M,CARDAMONE P,FOTTNER L.Influence of endwall contouring on the transonic flow in a compressor blade[R].ASME Paper GT2002-30642,2002.
|
| [16] |
DORFNER C,NICKE E,VOSS C.Axis-asymmetric profiled endwall design by using multiobjective optimisation linked with 3d rans-flow-simulations[R].ASME Paper GT2007-27268,2007.
|
| [17] |
VARPE M,PRADEEP A.Benefits of nonaxisymmetric endwall contouring in a compressor cascade with a tip clearance[J].Journal of Fluids Engineering,2015,137(5):051101.1-051101.15.
|
| [18] |
HOUGHTON T,DAY I.Enhancing the stability of subsonic compressors using casing grooves[R].ASME Paper GT2009-59210,2009.
|
| [19] |
JI L C,SHAO W W,YI W L,et al.A model for describing the influences of SUC-EW dihedral angle on corner separation[R].ASME Paper GT2007-27618,2007.
|
| [20] |
JI L C,TIAN Y,LI W L,et al.Numerical studies on improving performance of rotor-67 by blended blade and endwall technique[R].ASME Paper GT2012-68538,2012.
|
| [21] |
ZHONG J,HAN J A,LIU Y,et al.Numerical simulation of endwall fence on the secondary flow in compressor cascade[R].ASME Paper GT2008-50888,2008.
|
| [22] |
WENNERSTROM A J.Highly loaded axial flow compressors:history and current developments[J].Journal of Turbomachinery,1990,112(4):567-578.
|
| [23] |
张相毅,周敏,王如根,等.叶片压力面到吸力面射流对其气动特性的影响[J].空气动力学学报,2006,24(2):152-156. ZHANG Xiangyi,ZHOU Min,WANG Rugen,et al.Research on the effect of jet flow from pressure surface to suction surface on performance of blade[J].Acta Aerodynamica Sinica,2006,24(2):152-156.(in Chinese)
|
| [24] |
周敏,王如根,曹朝辉,等.开槽位置和槽道结构对叶栅性能的影响[J].空气动力学学报,2008,26(3):400-404. ZHOU Min,WANG Rugen,CAO Zhaohui,et al.Effect of slot position and slot structure on performance of cascade[J].Acta Aerodynamica Sinica,2008,26(3):400-404.(in Chinese)
|
| [25] |
RAMZI M,BOIS G,ABDERRAHMANE G.Numerical study of passive control with slotted blading in highly loaded compressor cascade at low mach number[J].International Journal of Fluid Machinery and Systems,2011,4(1):97-103.
|
| [26] |
RAMZI M,ABDERRAHMANE G.Passive control via slotted blading in a compressor cascade at stall condition[J].Journal of Applied Fluid Mechanics,2013,6(4):571-580.
|
| [27] |
穆小强,陆利蓬.叶根开槽叶栅对角区分离的控制[J].燃气涡轮试验与研究,2007,20(3):28-33. MU Xiaoqiang,LU Lipeng.Corner separation control by blade slot at the root of blade[J].Gas Turbine Experiment and Research,2007,20(3):28-33.(in Chinese)
|
| [28] |
LIU Y W,SUN J J,TANG Y M,et al.Effect of slot at blade root on compressor cascade performance under different aerodynamic parameters[J].Applied Sciences,2016,6(12):421-421.
|
| [29] |
王宏娟,蔡可军,余申.超声速压气机叶栅中激波,边界层相互作用的基本现象及被动式控制的研究[J].流体力学实验与测量,1997,11(2):60-64. WANG Hongjuan,CAI Kejun,YU Shen.Some preliminary experimental results on passive control of shock wave boundary layer interaction in supersonic cascades[J].Experiments and Measurements in Fluid Mechanics,1997,11(2):60-64.(in Chinese)
|
| [30] |
CHEN P P,QIAO W Y,KARSTEN L,et al.Location effect of boundary layer suction on compressor hub-corner separation[R].ASME Paper GT2014-25043,2014.
|
| [31] |
SCHREIBER H A.Experimental investigations on shock losses of transonic and supersonic compressor cascades[R].AGARD Report,1987-CP-401,1987.
|
DownLoad: