Volume 36 Issue 9
Sep.  2021
Turn off MathJax
Article Contents
FENG Xinkai, YANG Lihua. Analysis on thermoelasto-hydrodynamic lubrication characteristics of tilting pad thrust bearings under heavy load[J]. Journal of Aerospace Power, 2021, 36(9): 1861-1870. doi: 10.13224/j.cnki.jasp.20200514
Citation: FENG Xinkai, YANG Lihua. Analysis on thermoelasto-hydrodynamic lubrication characteristics of tilting pad thrust bearings under heavy load[J]. Journal of Aerospace Power, 2021, 36(9): 1861-1870. doi: 10.13224/j.cnki.jasp.20200514

Analysis on thermoelasto-hydrodynamic lubrication characteristics of tilting pad thrust bearings under heavy load

doi: 10.13224/j.cnki.jasp.20200514
  • Received Date: 2020-11-30
  • Publish Date: 2021-09-28
  • A thermoelasto-hydrodynamic (TEHD) model of tilting pad thrust bearings was established and solved by Newton-Raphson iterative method.The influences of elastic deformation,thermal deformation and load on the static and dynamic characteristics of oil film were studied.Results showed that the elastic deformation reduced the dynamic pressure effect of the oil film,while the thermal deformation enhanced the dynamic pressure effect of the oil film.With the increase of external load,the influence of thermal deformation on the static and dynamic characteristics of the bearing decreased and the influence of elastic deformation became more significant.Besides,the influence of elastic deformation was more sensitive under heavy load.Considering the significant influences of bearings material compressive resistance and high temperature resistance on the static and dynamic characteristics of tilting pad thrust bearings,study on the stability and safety of thrust bearings can help to optimize thrust bearings design.

     

  • loading
  • [1]
    GLAVATSKIH S B.Tilting pad thrust bearings[R].Leeds,UK:the 29th Leeds-Lyon Symposium on Tribology,2003.
    [2]
    ALMQVIST T.THD Analysis of tilting pad thrust bearings:comparison between theory and experiments[J].Journal of Tribology,2000,122(2):412-417.
    [3]
    李贤燚,赵耀.可倾瓦推力轴承润滑油膜静动特性计算的嵌套式二分法与应用[J].船舶力学,2019,23(2):142-151.
    [4]
    FILLON M,DESBORDES H,FRENE J.A global approach of thermal effects including pad deformations in tilting-pad journal bearings submitted to unbalance load[J].Journal of Tribology,1996,118(1):169-174.
    [5]
    RASOOL K,LUIS S A.Effect of pad and liner material properties on the static load performance of a tilting pad thrust bearing[R].Phoenix,US:Turbomachinery Technical Conference and Exposition,2019.
    [6]
    SRIKANTH D V,KAUSHAL K.Determination of a large tilting pad thrust bearing angular stiffness[J].Tribology International,2012,47:69-76.
    [7]
    ALI E S,FENNER R T.Three-dimensional thermoelasto-hydrodynamic analysis of pivoted pad thrust bearings[J].Journal of Mechanical Engineering Science,1988,202(1):39-50.
    [8]
    JIANG Xiulong,WANG Jiugen,FANG Jinghui.Thermal elastohydrodynamic lubrication analysis of tilting pad thrust bearings[J].Journal of Engineering Tribology,2011,225(2):51-57.
    [9]
    FILLON M,GLAVATSKIH S B.PTFE-faced centre pivot thrust pad bearings:factors affecting TEHD performance[J].Tribology International,2008,41(12):1219-1225.
    [10]
    GLAVATSKIH S B,FILLON M.TEHD analysis of thrust bearings with PTFE-faced pads[J].Journal of Tribology,2006,128(1):49-58.
    [11]
    WANG Weimin,LIU Binbin,ZHANG Ya.Theoretical and experimental study on the static and dynamic characteristics of tilting-pad thrust bearing[J].Tribology International,2018,123:26-36.
    [12]
    SRIKANTH D V,CHATURVEDI K K,REDDY A C K.Modelling of large tilting pad thrust bearing stiffness and damping coefficients[J].Tribology in Industry,2009,31(3):23-28.
    [13]
    CHANG Qiuying.Thermoelastohydrodynamic analysis of the static performance of tilting-pad journal bearings with the Newton-Raphson method[J].Tribology International,2002,35(4):225-234.
    [14]
    马希直,朱均.载荷扰动下可倾瓦推力轴承绝热瞬态过程分析[J].航空动力学报,2010,25(3):713-717.
    [15]
    DOWSON D.A generalized Reynolds equation for fluid-film lubrication[J].International Journal of Mechanical Sciences,1962,4(2):159-170.
    [16]
    温诗铸,黄平.摩擦学原理[M].5版.北京:清华大学出版社,2018.
    [17]
    李忠,秦大同.可倾瓦推力轴承在变载荷下的瞬态润滑性能研究[J].中国机械工程,2004,15(15):1326-1328.
    [18]
    DENNIS V,PELLEGRIN D,DOUGLAS J.An iso-viscous,isothermal model investigating the influence of hydrostatic recesses on a spring-supported tilting pad thrust bearing[J].Tribology International,2012,51:25-35.
    [19]
    KYUNG W K,MASATO T,YUKIO H.A three-dimensional analysis of thermohydrodynamic performance of sector-shaped,tilting-pad thrust bearings[J].Journal of Lubrication Technology,1983,105(3):406-412.
    [20]
    刘世海.基于APDL的可倾瓦推力轴承润滑性能的研究[D].哈尔滨:哈尔滨理工大学,2015.
    [21]
    王报龙,王亚兵,刘洋洋.轴系倾斜下可倾瓦推力轴承静动特性分析[J].西安交通大学学报,2020,54(7):129-138.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (484) PDF downloads(205) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return