Volume 37 Issue 1
Jan.  2022
Turn off MathJax
Article Contents
GAO Feng, LIU Xiuting, YU Bin. Multi-objective optimization design for vibration parameters of nonlinear hard-coating blisk[J]. Journal of Aerospace Power, 2022, 37(1): 103-113. doi: 10.13224/j.cnki.jasp.20200566
Citation: GAO Feng, LIU Xiuting, YU Bin. Multi-objective optimization design for vibration parameters of nonlinear hard-coating blisk[J]. Journal of Aerospace Power, 2022, 37(1): 103-113. doi: 10.13224/j.cnki.jasp.20200566

Multi-objective optimization design for vibration parameters of nonlinear hard-coating blisk

doi: 10.13224/j.cnki.jasp.20200566
  • Received Date: 2020-12-30
  • Publish Date: 2022-01-28
  • To optimize the damping vibration reduction of strain-dependent hard coating on the blisk,the multi-objective optimization design for coating parameters of the nonlinear hard-coating blisk was conducted.The vibration characteristics of hard-coating blisk was analyzed using the energy-based finite element method with reference to the composite Mindlin plate theory associated with the unified iterative calculation technique based on the Newton-Raphson method;the multi-objective optimization problems for coating parameters of hard-coating blisk were solved by the NSGA-Ⅲ algorithm,and the optimization results were expressed as Pareto front solutions;an academic blisk with NiCoCrAlY+YSZ hard coating on blades,taken as the specific case study benchmark,was selected to conduct the bi-objective and triple-objective optimization design for coating parameters.The results revealed that the effect of the coating parameters on the vibration characteristics of blisk was constrained mutually,the coating parameters located at the “turning point” in Pareto front solutions can balance all aspects of design performance on the vibration characteristics of hard-coating blisk,and the obtained coating parameters can also be referenced according to the practical engineering requirements.

     

  • loading
  • [1]
    张海艳,张连锋.航空发动机整体叶盘制造技术国内外发展概述[J].航空制造技术,2013(增刊2):38-41.
    [2]
    王增强.航空发动机整体叶盘加工技术[J].航空制造技术,2013(9):40-43.
    [3]
    高峰,孙伟.涂敷硬涂层的整体叶盘振动特性与阻尼解析分析[J].振动与冲击,2018,37(20):1-7,14.
    [4]
    XIE Fangtao,MA Hui,CUI Can,et al.Vibration response comparison of twisted shrouded blades using different impact models[J].Journal of Sound and Vibration,2017,397:171-191.(in Chinese)
    [5]
    BOTTO D,GASTADI C,GOLA M M,et al.An experimental investigation of the dynamics of a blade with two under-platform dampers[J].Journal of Engineering for Gas Turbines and Power,2018,140(3):032504.1-032504.9.
    [6]
    周航,校金友,徐超.考虑频变阻尼的粘弹性阻尼层板结构模态分析方法[J].振动与冲击,2018,37(14):208-213.
    [7]
    STATHOPOULOS V,SADYKOV V,PAVLOVA S,et al.Design of functionally graded multilayer thermal barrier coatings for gas turbine application[J].Surface and Coatings Technology 2016,295:20-28.
    [8]
    MORITA T,INOUE K,DING X,et al.Effect of hybrid surface treatment composed of nitriding and DLC coating on friction-wear properties and fatigue strength of alloy steel[J].Materials Science and Engineering: A,2016,661:105-114.
    [9]
    CATANIA G,STROZZI M.Damping oriented design of thin-walled mechanical components by means of multi-layer coating technology[J].Coatings,2018,8(2): 73.1-73.21.
    [10]
    TORVIK P J.Determination of mechanical properties of non-linear coatings from measurements with coated beams[J].International Journal of Solids and Structures,2009,46(5):1066-1077.
    [11]
    HUANG C S,HUANG S H.Analytical solutions based on fourier cosine series for the free vibrations of functionally graded material rectangular mindlin plates[J].Materials,2020,13(17):3820.1-3820.20.
    [12]
    BELOUNAR A,BENMEBAREK S,HOUHOU M N,et al.Free vibration with mindlin plate finite element based on the strain approach[J].Journal of the Institution of Engineers: Series C:Mechanical,Production,Aerospace and Marine Engineering,2020,101(1):331-346.
    [13]
    DEB K,PRATAP A,AGARWAL S,et al.A fast and elitist multi-objective genetic algorithm: NSGA-Ⅱ[J].IEEE Transactions Evolutionary Computation,2002,6(2):182-197.
    [14]
    DEB K,JAIN H.An evolutionary many-objective optimization algorithm using reference-point-based nondominated sorting approach:Part Ⅰ solving problems with box constraints[J].IEEE Transactions on Evolutionary Computation,2014,18(4):577-601.
    [15]
    BI Xiaojun,WANG Chao.A niche-elimination operation based NSGA-Ⅲ algorithm for many-objective optimization[J].Applied Intelligence,2017,48:118-141.
    [16]
    CARVALHO M,BRITTO A.Influence of reference points on a many objective optimization algorithm[C]∥Proceedings of 2018 7th Brazilian Conference on Intelligent Systems.Sao Paulo,Brazil: IEEE Computer Society,2018:31-36.
    [17]
    GU Zimin,WANG Gaihe.Improving NSGA-Ⅲ algorithms with information feedback models for large-scale many-objective optimization[J].Future Generation Computer Systems,2020,107:49-69.
    [18]
    DAS I,DENNIS J E.Normal-boundary intersection: a new method for generating the pareto surface in nonlinear multicriteria optimization problems[J].SIAM Journal on Optimization,1996,8(3):631-657.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (334) PDF downloads(68) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return