| Citation: | LI Jie, TIAN Shuqing, YANG Meisong, DENG Hongwu. Flow and heat transfer characteristics in roughened rotating wedge-shaped channel with pin-fins[J]. Journal of Aerospace Power, 2021, 36(1): 34-41. doi: 10.13224/j.cnki.jasp.2021.01.005
|
| [1] |
HAN J C,DUTTA S,EKKAD S.Gas turbine heat transfer and cooling technology［M］.Boca Raton:CRC press,2012.
|
| [2] |
HAN J C.Fundamental gas turbine heat transfer［J］.Journal of Thermal Science and Engineering Applications,2013,5(2):1-15.
|
| [3] |
UZOL O,CAMCI C.Elliptical pin fins as an alternative to circular pin fins for gas turbine blade cooling applications:Part 1 endwall heat transfer and total pressure loss characteristics［R］.ASME Paper 2001-GT-0180,2001.
|
| [4] |
LUO L,YAN H,DU W,et al.Flow structure and heat transfer characteristics of a rectangular channel with pin fins and dimples with different shapes［J］.Journal of Thermal Science and Engineering Applications,2019,11(2):024501.1-024501.10.
|
| [5] |
PANDIT J,THOMPSON M,EKKAD S V,et al.Effect of pin fin to channel height ratio and pin fin geometry on heat transfer performance for flow in rectangular channels［J］.International Journal of Heat and Mass Transfer,2014,77:359-368.
|
| [6] |
EREN M,CALISKAN S.Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method［J］.International Journal of Heat and Mass Transfer,2016,102:1108-1122.
|
| [7] |
YANG S F,WU H W,HAN J C,et al.Heat transfer in a smooth rotating multi-passage channel with hub turning vane and trailing-edge slot ejection［J］.International Journal of Heat and Mass Transfer,2017,109:1-15.
|
| [8] |
KULASEKHARAN N,PRASAD B.Computational investigations in the trailing edge region of cooled turbine vane:comparison of different channel shapes［R］.ASME Paper GT2007-27421,2007.
|
| [9] |
李洋.旋转条件下双路进气楔形通道流动与换热特性研究［D］.北京:北京航空航天大学,2016. LI Yang.Flow and heat transfer study in a rotating wedge-shape channel with two coolant inlets［D］.Beijing:Beijing University of Aeronautics and Astronautics,2016.(in Chinese)
|
| [10] |
LI Y,XU G,DENG H,et al.Effects of coolant mass flow rate ratio on heat transfer in a two-inlet rotating wedge-shaped channel［J］.International Journal of Heat and Mass Transfer,2016,96:353-361.
|
| [11] |
TAO Z,QIU L,DENG H.Heat transfer in a rotating smooth wedge-shaped channel with lateral fluid extraction［J］.Applied Thermal Engineering,2015,87:47-55.
|
| [12] |
LIU Y H,HUH M,HAN J C.High rotation number effect on heat transfer in a trailing edge channel with tapered ribs［J］.International Journal of Heat and Fluid Flow,2012,33(1):182-192.
|
| [13] |
QIU L,DENG H,SUN J,et al.Pressure drop and heat transfer in rotating smooth square U-duct under high rotation numbers［J］.International Journal of Heat and Mass Transfer,2013,66:543-552.
|
| [14] |
程俊华,倪彬,邓宏武,等.高旋转数内冷通道换热实验技术及验证［J］.航空动力学报,2014,29(8):1817-1823. CHENG Junhua,NI Bin,DENG Hongwu,et al.Experimental technique of heat transfer in rotating channels at high rotation numbers［J］.Journal of Aerospace Power,2014,29(8):1817-1823.(in Chinese)
|
| [15] |
DITTUS F W,BOELTER L M K.Heat transfer in automobile radiators of the tubular type［J］.International Communications in Heat and Mass Transfer,1985,12(1):3-22.
|
| [16] |
KLINE S,MCCLINTOCK F.Describing uncertainties in single-sample experiments［J］.Mechanical Engineering,1953,75(1):3-8.
|
| [17] |
DENG H,HAN Y,TAO Z,et al.Heat transfer in a rotating trailing edge wedge-shaped cooling channel with two inflow forms［J］.Experimental Thermal and Fluid Science,2017,88:530-541.
|
| [18] |
DENG H,QIU L,TAO Z,et al.Heat transfer study in rotating smooth square U-duct at high rotation numbers［J］.International Journal of Heat and Mass Transfer,2013,66:733-744.
|
DownLoad: