| Citation: | JIA Ning, JIN Wei, WU Junmei. Numerical investigation on flow and heat transfer of beveled pin-fins based on airfoil profile in a cooling channel[J]. Journal of Aerospace Power, 2021, 36(1): 61-69. doi: 10.13224/j.cnki.jasp.2021.01.008
|
| [1] |
倪萌,朱惠人,裘云,等.航空发动机涡轮叶片冷却技术综述［J］.燃气轮机技术,2005,18(4):25-33,38. NI Meng,ZHU Huiren,QIU Yun,et al.Review of aero-turbine blade cooling technologies［J］.Gas Turbine Technology,2005,18(4):25-33,38.(in Chinese)
|
| [2] |
HAN J,DUTTA S,EKKAD S.Gas turbine heat transfer and cooling technology［M］.2nd ed.Baca Ration,US:CRC Press,2012.
|
| [3] |
JADHAV R S,BALAJI C.Fluid flow and heat transfer characteristics of a vertical channel with detached pin-fin arrays arranged in staggered manner on two opposite endwalls［J］.International Journal of Thermal Sciences,2016,105:57-74.
|
| [4] |
PANDIT J,THOMPSON M,EKKAD S V,et al.Effect of pin fin to channel height ratio and pin fin geometry on heat transfer performance for flow in rectangular channels［J］.International Journal of Heat and Mass Transfer,2014,77:359-368.
|
| [5] |
王龙飞,王松涛,卢少鹏,等.小高径比扰流柱冷却通道的换热和流动特性［J］.航空动力学报,2015,30(6):35-46. WANG Longfei,WANG Songtao,LU Shaopeng,et al.Heat transfer and flow characteristics of low aspect ratio pin-fins in a cooling channel［J］.Journal of Aerospace Power,2015,30(6):35-46.(in Chinese)
|
| [6] |
HUANG Liang,LI Qingling,ZHAI Hongyan.Experimental study of heat transfer performance of a tube with different shaped pin fins［J］.Applied Thermal Engineering,2018,129:1325-1332.
|
| [7] |
WAN Wei,DENG Daxiang,HUANG Qingsong,et al.Experimental study and optimization of pin fin shapes in flow boiling of micro pin fin heat sinks［J］.Applied Thermal Engineering,2017,114:436-449.
|
| [8] |
KIRSCH K L,THOLE K A.Heat transfer measurements of oblong pins［J］.Journal of Turbomachinery,2015,137(7):071004.1-071004.9.
|
| [9] |
JIN Wei,JIA Ning,WU Junmei,et al.Numerical study on flow and heat transfer characteristics of pin-fins with different shapes［R］.ASME Paper GT2019-90520,2019.
|
| [10] |
HENZE M,WOLFERSDORF J V,WNEIGAD B,et al.Flow and heat transfer characteristics behind vortex generators:a benchmark dataset［J］.International Journal of Heat and Fluid Flow,2011,32(1):318-328.
|
| [11] |
HENZE M,DIETZ C,NEUMANN S O,et al.Heat transfer enhancement from single vortex generators［R］.ASME Paper GT2005-68087,2005.
|
| [12] |
SAHA P,BISWAS G,SARKAR S.Comparison of winglet-type vortex generators periodically deployed in a plate-fin heat exchanger:a synergy based analysis［J］.International Journal of Heat and Mass Transfer,2014,74:292-305.
|
| [13] |
CHOMPOOKHAM T,THIANPONG C,KWANKAOMENG S,et al.Heat transfer augmentation in a wedge-ribbed channel using winglet vortex generators［J］.International Communications in Heat and Mass Transfer,2010,37(2):163-169.
|
| [14] |
TRAN L V,LITTLE Z D,TRAN P K,et al.Numerical simulations of a rectangular channel with symmetric and non-symmetric wedge-shaped turbulators［R］.AIAA-2015-3732,2005.
|
| [15] |
CARMICHAEL R.Public domain aeronautical software-tables from appendices ⅰ,ⅱ,ⅲ of theory of airfoil sections:appendix Ⅰ profiles［EB/OL］.［2020-06-10］ http:∥www.pdas.com/profiles.html.
|
| [16] |
XU Jin,YAO Jiaxu,SU Pengfei,et al.Heat transfer and pressure loss characteristics of pin-fins with different shapes in a wide channel［R］.ASME Paper GT2017-63761,2017.
|
| [17] |
《中国航空材料手册》编辑委员会.中国航空材料手册［M］.2版.北京:中国标准出版社,2001.
|
| [18] |
陶文铨.数值传热学［M］.2版.西安:西安交通大学出版社,2001.
|
| [19] |
XU Guoqiang,LI Yang,DENG Hongwu,et al.The application of similarity theory for heat transfer investigation in rotational internal cooling channel［J］.International Journal of Heat and Mass Transfer,2015,85:98-109.
|
DownLoad: