| Citation: | ZHANG Shaowen, SHI Jiancheng, LI Wei. Design and validation of high-lift turbine nozzle guide vane profile[J]. Journal of Aerospace Power, 2021, 36(1): 185-192. doi: 10.13224/j.cnki.jasp.2021.01.021
|
| [1] |
ZWEIFEL O.Optimum blade pitch for turbomachines with special reference to blades of great curvature［J］.The Engineers Digest,1946,7:358-360.
|
| [2] |
HOWELL R J,HODSON H P,SCHULTE V,et al.Boundary layer development in the BR710 and BR715 LP turbines:the implementation of high-lift and ultra-high-lift concepts［J］.Journal of Turbomachinery,2002,124(3):385-392.
|
| [3] |
PRAISNER T J,GROVER E A,KNEZEVICI D C,et al.Toward the expansion of low-pressure-turbine airfoil design space［R］.ASME Paper GT2008-50898,2008.
|
| [4] |
HOHEISEL H,KIOCK R,LICHTFU H J,et al.Influence of free stream turbulence and blade pressure gradient on boundary layer and loss behavior of turbine cascades［R］.New York:ASME International Gas Turbine Conference and Exhibit,1986.
|
| [5] |
ZHANG X F,VERA M,HODSON H P,et al.Separation and transition control on an aft-loaded ultra-high-lift lp turbine blade at low Reynolds numbers:low-speed investigation［J］.Journal of Turbomachinery,2006,128(6):517-527.
|
| [6] |
ZORIC T,POPOVIC I,SJOLANDER S A,et al.Comparative investigation of three highly loaded LP turbine airfoils:Part Ⅰ measured profile and secondary losses at design incidence［R］.ASME Paper GT2007-27537,2007.
|
| [7] |
ZORIC T,POPOVIC I,SJOLANDER S A,et al.Comparative investigation of three highly loaded lp turbine airfoils:Part Ⅱ measured profile and secondary losses at off-design incidence［R］.ASME Paper GT2007-27538,2007.
|
| [8] |
张华良,谭春青,董学智,等.超高负荷涡轮弯曲叶栅的实验研究［J］.航空动力学报,2009,24(10):2314-2318. ZHANG Hualiang,TAN Chunqing,DONG Xuezhi,et al.Experimental investigation on the influence of bowed blade in ultra-highly loaded turbine cascade［J］.Journal of Aerospace Power,2009,24(10):2314-2318.(in Chinese)
|
| [9] |
杨林,乔渭阳,罗华玲,等.低雷诺数高负荷低压涡轮叶型的气动设计［J］.航空动力学报,2013,28(5):1019-1028. YANG Lin,QIAO Weiyang,LUO Hualing,et al.Aerodynamic design of highly-loaded blade in low-pressure turbine with low Reynolds number［J］.Journal of Aerospace Power,2013,28(5):1019-1028.(in Chinese)
|
| [10] |
孙爽,雷志军,卢新根,等.基于表面粗糙度的超高负荷低压涡轮叶片附面层控制［J］.航空动力学报,2016,31(4):836-846. SUN Shuang,LEI Zhijun,LU Xingen,et al.Boundary layer control of ultra-high-lift low pressure turbine blade with surface roughness［J］.Journal of Aerospace Power,2016,31(4):836-846.(in Chinese)
|
| [11] |
董明,葛宁,陈云.跨声速涡轮叶栅激波损失控制方法［J］.航空动力学报,2018,33(5):1226-1235. DONG Ming,GE Ning,CHEN Yun,Shock loss control methods for transonic turbine cascades［J］.Journalof Aerospace Power,2018,33(5):1226-1235.(in Chinese)
|
| [12] |
GIER J,ARDEY S.On the impact of blade count reduction on aerodynamic performance and loss generation in a three-stage LP turbine［R］.ASME Paper 2001-GT-0197,2001.
|
| [13] |
HASELBACH F,SCHIFFER H P,HORSMAN M,et al.The application of ultra high lift blading in the BR715 LP turbine［J］.Journal of Turbomachinery,2002,124(1):45-51.
|
| [14] |
陈云,王雷,王刚.大涵道比发动机多级低压涡轮气动设计［J］.航空发动机,2013,39(4):51-55. CHEN Yun,WANG Lei,WANG Gang.Aerodynamic design of multistage low pressure turbine for high bypass ratio aeroengine［J］.Aeroengine,2013,39(4):51-55.(in Chinese)
|
| [15] |
BUNKER R S.A review of shaped hole turbine film-cooling technology［J］.Journal of Heat Transfer,2005,127(4):441-453.
|
| [16] |
KOFF B L,KOFF B L.Gas turbine technology evolution:a designer’s perspective［J］.Journal of Propulsion and Power,2004,20(4):577-595.
|
| [17] |
TOM S,VIGER Y.Aerodynamics heat transfer materials and mechanics［M］∥BOGARD D G,THOLE K A.Film Cooling.Restion,US:AIAA,2014.
|
| [18] |
STEPHAN B,KRCKELS J,GRITSCH M.Investigation of aerodynamic losses and film cooling effectiveness for a NGV profile［R］.ASME Paper GT2010-22810,2010.
|
DownLoad: