| Citation: | JIAO Junjie, MO Rong, XU Guangqing, FU Xuan, SUN Huibin, CHANG Zhiyong. Influence of position error of bolt hole on assembly mechanical characteristics of short precision bolted connection structure[J]. Journal of Aerospace Power, 2021, 36(5): 935-947. doi: 10.13224/j.cnki.jasp.2021.05.005
|
| [1] |
陈光,洪杰,马艳红.航空燃气涡轮发动机结构［M］.北京:北京航空航天大学出版社,2010.
|
| [2] |
李小强,孟庆阔,杜一凡,等.拧紧策略对航空发动机单螺栓连接预紧力的影响［J］.机械工程学报,2020,56(13):231-241. LI Xiaoqiang,MENG Qingkuo,DU Yifan,et al.Influence of tightening strategy on pre-tightening force of aero-engine sigle-bolt connection［J］.Journal of Mechanical Engineering,2020,56(13):231-241.(in Chinese)
|
| [3] |
陈英涛,艾延廷,张云达.螺栓连接预紧力对涡轮盘静力学特性影响的仿真分析［J］.燃气涡轮试验与研究,2019,32(1):26-29. CHEN Yingtao,AI Yanting,ZHANG Yunda.Simulation analysis on the effect of bolt connection preload on static characteristics of turbine disk［J］.Gas Turbine Experiment and Research.2019,32(1):26-29.(in Chinese)
|
| [4] |
黄伟强.航发低压转子连接螺栓组螺栓装配预紧力研究［D］.辽宁 大连:大连理工大学,2018. HUANG Weiqiang.Study on pre tightening force for connecting bolts of aeroengine low pressure rotor［D］.Dalian Liaoning:Dalian University of Technology,2018.(in Chinese)
|
| [5] |
杨国庆,王飞,洪军,等.螺栓被连接件刚度理论的计算方法［J］.西安交通大学学报,2012,46(7):50-56. YANG Guoqing,WANG Fei,HONG Jun,et al.Theoretical analysis for bolted member stiffness［J］.Journal of Xi’an Jiaotong University,2012,46(7):50-56.(in Chinese)
|
| [6] |
黄信.考虑结合面接触的螺栓连接刚度研究［D］.辽宁 大连:大连理工大学,2016. HUANG Xin.Research on stiffness of bolted joints considering joint surfaces contact［D］.Dalian Liaoning:Dalian University of Technology,2016.(in Chinese)
|
| [7] |
张永杰,孙秦.带预紧力受剪螺栓连接刚度分析［J］.强度与环境,2007,34(4):22-25. ZHANG Yongjie,SUN Qin.Sheared bolt joint stiffness analysis with pre-tightened force［J］.Structure and Environment Engineering,2007,34(4):22-25.(in Chinese)
|
| [8] |
姚星宇,王建军.航空发动机螺栓连接载荷与结构参数对连接刚度影响规律［J］.推进技术,2017,38(2):424-433. YAO Xingyu,WANG Jianjun.Effects of load and structure parameters of aero-engine bolted joints on joint stiffness［J］.Journal of Propulsion Technology,2017,38(2):424-433.(in Chinese)
|
| [9] |
郭文新,幺宇辉,李韵,等.螺栓连接对高压转子结合面弯曲刚度的影响［J］.噪声与振动控制,2018,38(1):52-57. GUO Wenxin,YAO Yuhui,LI Yun,et al.The influence of bolt joint characteristics on bending stiffness of rotor joint surface［J］.Noise and Vibration Control,2018,38(1):52-57.(in Chinese)
|
| [10] |
赵丹.螺栓连接对转子动力特性影响的研究［D］.沈阳:沈阳航空航天大学,2013. ZHAO Dan.Study on the influence of bolted joint on the dynamic characteristic of rotor structure［D］.Shenyang:Shenyang Aerospace University,2013.(in Chinese)
|
| [11] |
熊志亮.螺栓连接接触刚度及对转子动力学影响［D］.辽宁 大连:大连理工大学,2019. XIONG Zhiliang.Contact stiffness of bolted joint and its effect on rotor-dynamics［D］.Dalian Liaoning:Dalian University of Technology,2019.(in Chinese)
|
| [12] |
王德友,辛明,艾延廷,等.螺栓联接参数对静子机匣同心度影响的研究［J］.机械设计与制造,2017(5):190-193,197. WANG Deyou,XIN Ming,AI Yanting,et al.Research of the bolting parameters effect on stator casing concentricity［J］.Machinery Design and Manufacture,2017(5):190-193,197.(in Chinese)
|
| [13] |
刘卓乾.航空发动机螺栓连接转子的振动特性研究［D］.天津:天津大学,2016. LIU Zhuoqian.Study on vibration characteristic of aero-engine rotor with bolt joint［D］.Tianjin:Tianjin University,2016.(in Chinese)
|
| [14] |
翟学,翟庆刚,王建军,等.基于有限元的螺栓连接参数化建模技术研究［J］.推进技术,2016,37(7):1364-1371. ZHAI Xue,ZHAI Qinggang,WANG Jianjun,et al.Parameterized modeling technology of bolted joints based on finite element［J］.Journal of Propulsion Technology,2016,37(7):1364-1371.(in Chinese)
|
| [15] |
孟春晓,张文胜,马辉,等.螺栓连接鼓筒转子结构动力学特性分析［J］.振动工程学报,2019,32(3):517-525. MENG Chunxiao,ZHANG Wensheng,MA Hui,et al.Analysis of dynamic characteristics of a bolted drum rotor structure［J］.Journal of Vibration Engineering,2019,32(3):517-525.(in Chinese)
|
| [16] |
姜春云.螺栓连接结构动力学仿真分析方法研究［D］.辽宁 大连:大连理工大学,2019. JIANG Chunyun.Research on dynamic simulation analysis method of bolted joint structure［D］.Dalian Liaoning:Dalian University of Technology,2019.(in Chinese)
|
| [17] |
Verein Deutscher Ingenieure.Richtlinien VDI 2230 Blatt 1:systematic calculation of high duty bolted joints［S］.Germany:VDI-Richlinien,2003.
|
| [18] |
寇剑锋.螺栓连接剪切本构模型及其在多钉连接结构中的应用［D］.西安:西北工业大学,2017. KOU Jianfeng.Shear constitutive model for bolted-joint and its application to multi-bolt joints［D］.Xi’an:Northwestern Polytechnical University,2017.(in Chinese)
|
DownLoad: