Volume 37 Issue 4
Apr.  2022
Turn off MathJax
Article Contents
ZHANG Ping, LU Shan, JING Xin, YANG Mao, LUO Zhongbing, ZHOU Rongxin. Simulation method of short crack propagation in turbine disks based on crystal plasticity[J]. Journal of Aerospace Power, 2022, 37(4): 684-693. doi: 10.13224/j.cnki.jasp.20210230
Citation: ZHANG Ping, LU Shan, JING Xin, YANG Mao, LUO Zhongbing, ZHOU Rongxin. Simulation method of short crack propagation in turbine disks based on crystal plasticity[J]. Journal of Aerospace Power, 2022, 37(4): 684-693. doi: 10.13224/j.cnki.jasp.20210230

Simulation method of short crack propagation in turbine disks based on crystal plasticity

doi: 10.13224/j.cnki.jasp.20210230
  • Received Date: 2021-05-11
  • Publish Date: 2022-04-28
  • In view of the early-stage short crack propagation behaviour in turbine disks under low-cycle fatigue,a method coupling crystal plasticity (CP) theory and extended finite element method (XFEM) was proposed to simulate short cracks in engineering structures.The method used the total cumulative shear strain in crystals as the criterion of crack propagation and made the crack propagate along the slip plane with the most active slip system.By using sub-model technology/regional refinement of grids and a combination of macro-micro constitutive models,the framework overcame the scale mismatch between the real engineering structure and the micro model,and then predicted the short crack propagation path and rate in the dangerous section of a technique turbine disk at an acceptable calculation cost.The results showed that the short crack propagation path and rate in structures was highly affected by crystal orientations,resulting in a large dispersion of fatigue life.At the same time,it verified the feasibility of the CP-XFEM-based framework in predicting the short crack propagation life of engineering structures.

     

  • loading
  • [1]
    CONNOLLEY T,REED P A S,STARINK M J.Short crack initiation and growth at 600 ℃ in notched specimens of Inconel718[J].Materials Science and Engineering A,2003 340(1/2):139-154.
    [2]
    TOH S F,RAINFORTH W M.Fatigue of a nickel base superalloy with bimodal grain size[J].Metal Science Journal,2016,12(12):1007-1014.
    [3]
    MA X,SHI H J.In situ SEM studies of the low cycle fatigue behavior of DZ4 superalloy at elevated temperature:effect of partial recrystallization[J].International Journal of Fatigue,2014,61(2):255-263.
    [4]
    朱磊,吴志荣,胡绪腾,等.镍基合金GH4169疲劳小裂纹的扩展行为[J].航空动力学报,2017,32(8):1984-1991.
    [5]
    张丽,黄新跃,吴学仁,等.镍基高温合金GH4169小裂纹早期扩展的原位疲劳试验[J].航空动力学报,2014,29(4):901-906.
    [6]
    MO?S N,DOLBOW J,BELYTSCHKO T.A finite element method for crack growth without remeshing[J].International Journal for Numerical Methods in Engineering,1999,46:131-150.
    [7]
    RANNOU J,LIMODIN N,RéTHORé J,et al.Three dimensional experimental and numerical multiscale analysis of a fatigue crack[J].Computer Methods in Applied Mechanics and Engineering,2010,199:1307-1325.
    [8]
    CUADRA J,BAXEVANAKIS K P,LOGHIN A,et al.Validation of a cyclic plasticity computational method using fatigue full‐field deformation measurements[J].Fatigue and Fracture of Engineering Materials and Structures,2016,39(6):722-736.
    [9]
    FARUKH F,ZHAO L G,JIANG R,et al.Realistic microstructure-based modelling of cyclic deformation and crack growth using crystal plasticity[J].Computational Materials Science,2016,111:395-405.
    [10]
    ZHANG P,ZHANG L,BAXEVANAKIS K P,et al.Modelling short crack propagation in a single crystal nickel-based superalloy using crystal plasticity and XFEM[J].International Journal of Fatigue,2020,136:105594.1-105594.11.
    [11]
    ZHANG P,BAXEVANAKIS K P,ZHAO L G.An investigation of short crack propagation in a single crystal Ni-based superalloy using crystal plasticity and the extended finite element method[J].Procedia Structural Integrity,2020,28:1176-1183.
    [12]
    WILSON D,DUNNE F P E.A mechanistic modelling methodology for microstructure-sensitive fatigue crack growth[J].Journal of the Mechanics and Physics of Solids,2019,124:827-848.
    [13]
    WILSON D,WAN W,DUNNE F P E.Microstructurally-sensitive fatigue crack growth in HCP BCC and FCC polycrystals[J].Journal of the Mechanics and Physics of Solidsm,2019,126:204-225.
    [14]
    LIU X T,LU Shan.A micro-crack initiation life simulation method by improving the Tanaka-Mura's model of slip behavior[J].International Journal of Fatigue,2021,145:106108.1-106108.11.
    [15]
    牟园伟,陆山.基于宏—介观模型的疲劳裂纹萌生数值模拟[J].机械强度,2012,34(3):379-383.
    [16]
    牟园伟,陆山.基于材料微观特性的涡轮盘疲劳裂纹萌生寿命数值仿真[J].航空学报,2013,34(2):282-290.
    [17]
    ASARO R J,RICE J R.Strain localization in ductile single crystals[J].Journal of the Mechanics and Physics of Solids,1977,25(5):309-338.
    [18]
    PEIRCE D,ASARO R J,NEEDLEMAN A.An analysis of nonuniform and localized deformation in ductile single crystals[J].Acta Metallurgica,1982,30(6):1087-1119.
    [19]
    冯引利,吴长波,郜伟强,等.FGH96涡轮盘低循环疲劳寿命分析技术与试验[J].航空动力学报,2012,27(3):628-634.
    [20]
    LIN B,ZHAO L G,TONG J.A crystal plasticity study of cyclic constitutive behaviour crack-tip deformation and crack-growth path for a polycrystalline nickel-based superalloy[J].Engineering Fracture Mechanics,2011,78(10):2174-2192.
    [21]
    北京航空材料研究院.金属材料疲劳裂纹扩展速率试验方法:
    [22]
    GB/T 6398-2000[S].北京:中国标准出版社,2000:450-455.
    [23]
    [22] 刘文珽,郑旻仲,费斌军,等.概率断裂力学与概率损伤容限/耐久性[M].北京:北京航空航天大学出版社,1999.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (592) PDF downloads(183) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return